17-03-01 08:04:12.729 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53===================
17-03-01 08:04:12.730 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle===================
17-03-01 08:04:12.731 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:12.731 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:12.732 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:12.732 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:12.780 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:12.780 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Selecting Reagent HB2 (6)===================
17-03-01 08:04:12.780 -08 000000018 INF: Valve A1: Go to position 6
17-03-01 08:04:12.780 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:04:12.841 -08 000000065 INF: FPGA: Recv T1MOVETO 50
17-03-01 08:04:12.841 -08 000000009 INF: Tilt Motor 1: To move from 5.000 to 5.077 (0.076 mm) should take 50 steps, but required 50 steps (0.076 mm). Slippage = 0.000 mm (0.00%)
17-03-01 08:04:12.841 -08 000000009 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:12.842 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 3\r
17-03-01 08:04:12.842 -08 000000018 INF: Valve A1: 484.950 seconds since last move, > 10.000 seconds required between moves
17-03-01 08:04:12.842 -08 000000018 INF: Valve A1: Taking shortest path 'CW' from 3 to 6
17-03-01 08:04:12.842 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CW6\r
17-03-01 08:04:12.842 -08 000000018 INF: SerialPort A1 (VICIA1): Recv  (discarded)
17-03-01 08:04:12.842 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:04:12.903 -08 000000153 INF: FPGA: Recv T1RD 19985
17-03-01 08:04:12.903 -08 000000153 INF: FPGA: Recv T2MOVETO 84
17-03-01 08:04:12.903 -08 000000153 INF: FPGA: Recv T3MOVETO 84
17-03-01 08:04:12.903 -08 000000113 INF: Tilt Motor 3: To move from 5.339 to 5.210 (-0.129 mm) should take 84 steps, but required 84 steps (0.128 mm). Slippage = 0.000 mm (0.00%)
17-03-01 08:04:12.903 -08 000000060 INF: Tilt Motor 2: To move from 5.392 to 5.264 (-0.128 mm) should take 84 steps, but required 84 steps (0.128 mm). Slippage = 0.000 mm (0.00%)
17-03-01 08:04:12.903 -08 000000009 INF: Tilt Motor 1: Encoder: at motor step 3330 + 5/6
17-03-01 08:04:12.903 -08 000000113 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:12.906 -08 000000060 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:12.907 -08 000000009 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:12.965 -08 000000054 INF: FPGA: Recv T3RD 20517
17-03-01 08:04:12.965 -08 000000054 INF: FPGA: Recv T2RD 20726
17-03-01 08:04:12.965 -08 000000054 INF: FPGA: Recv T1RD 19985
17-03-01 08:04:12.965 -08 000000060 INF: Tilt Motor 2: Encoder: at motor step 3454 + 2/6
17-03-01 08:04:12.965 -08 000000009 INF: Tilt Motor 1: Encoder: at motor step 3330 + 5/6
17-03-01 08:04:12.965 -08 000000060 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:12.965 -08 000000113 INF: Tilt Motor 3: Encoder: at motor step 3419 + 3/6
17-03-01 08:04:12.968 -08 000000009 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:12.971 -08 000000113 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:13.031 -08 000000144 INF: FPGA: Recv T2RD 20726
17-03-01 08:04:13.031 -08 000000144 INF: FPGA: Recv T1RD 19985
17-03-01 08:04:13.031 -08 000000144 INF: FPGA: Recv T3RD 20517
17-03-01 08:04:13.031 -08 000000060 INF: Tilt Motor 2: Encoder: at motor step 3454 + 2/6
17-03-01 08:04:13.031 -08 000000009 INF: Tilt Motor 1: Encoder: at motor step 3330 + 5/6
17-03-01 08:04:13.031 -08 000000060 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:13.031 -08 000000009 INF: Tilt Motor 1: After move to 5.0768, error = -0.0006, min/max error = -0.0015/0.0019, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:13.031 -08 000000009 INF: Tilt Motor 1: Moved to 5.0762 after 494.5353 ms
17-03-01 08:04:13.031 -08 000000113 INF: Tilt Motor 3: Encoder: at motor step 3419 + 3/6
17-03-01 08:04:13.032 -08 000000009 INF: ======================================
17-03-01 08:04:13.034 -08 000000113 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:13.090 -08 000000031 INF: FPGA: Recv T2RD 20726
17-03-01 08:04:13.090 -08 000000031 INF: FPGA: Recv T3RD 20517
17-03-01 08:04:13.090 -08 000000060 INF: Tilt Motor 2: Encoder: at motor step 3454 + 2/6
17-03-01 08:04:13.090 -08 000000113 INF: Tilt Motor 3: Encoder: at motor step 3419 + 3/6
17-03-01 08:04:13.090 -08 000000113 INF: Tilt Motor 3: After move to 5.2105, error = 0.0008, min/max error = -0.0017/0.0016, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:13.090 -08 000000113 INF: Tilt Motor 3: Moved to 5.2113 after 552.7494 ms
17-03-01 08:04:13.090 -08 000000060 INF: Tilt Motor 2: After move to 5.2636, error = 0.0008, min/max error = -0.0020/0.0015, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:13.091 -08 000000060 INF: Tilt Motor 2: Moved to 5.2644 after 553.2785 ms
17-03-01 08:04:13.091 -08 000000113 INF: ======================================
17-03-01 08:04:13.091 -08 000000060 INF: ======================================
17-03-01 08:04:13.092 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:13.093 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:13.093 -08 000000042 INF: Lane 1 was flagged for detilt operations. Moved to tilt positions: m1=5.07675395464298, m2=5.2635772251359, m3=5.2104912251359
17-03-01 08:04:13.094 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:13.095 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:13.095 -08 000000042 INF: Compensator: Remaining IntoPath
17-03-01 08:04:13.095 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:13.096 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:13.102 -08 000000042 INF: Swath 1 position calculated to be: {X=68.63164, Y=39.76308} from estimated center X= 69.147, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:04:13.102 -08 000000042 INF: Swath 2 position calculated to be: {X=69.73964, Y=39.76308} from estimated center X= 69.147, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:04:13.108 -08 000000042 INF: Swath 0: Converted transform from (-120.4647, 46.81866) pixels to (-0.0414, 0.016215) mm.
17-03-01 08:04:13.113 -08 000000042 INF: Swath 1: Converted transform from (-139.0519, 48.07305) pixels to (-0.047955, 0.01656) mm.
17-03-01 08:04:13.114 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308===================
17-03-01 08:04:13.114 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308===================
17-03-01 08:04:13.114 -08 000000042 INF: Transformed XStagePosition from 68.63164 mm to 68.5902375727892 mm.
17-03-01 08:04:13.126 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5693043557704 mm.
17-03-01 08:04:13.126 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3693043557704 mm.
17-03-01 08:04:13.126 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4600543557703 mm.
17-03-01 08:04:13.128 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:13.128 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:04:13.128 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:13.129 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -77.9 um, section = A_1
17-03-01 08:04:13.133 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:13.133 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:13.134 -08 000000069 INF: ===================MoveEmissionFilters===================
17-03-01 08:04:13.134 -08 000000153 INF: ===================Move X,Y===================
17-03-01 08:04:13.134 -08 000000023 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:13.135 -08 000000153 INF: ===================Move X,Y, Parallel===================
17-03-01 08:04:13.135 -08 000000082 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:13.135 -08 000000023 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:04:13.135 -08 000000108 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:13.135 -08 000000094 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:13.135 -08 000000088 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:13.135 -08 000000023 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:04:13.135 -08 000000023 INF: Z Motor: Moving to -0.1474 mm, started at -0.0779 mm
17-03-01 08:04:13.135 -08 000000023 INF: FPGA: Xmit ZTRG 0\n
17-03-01 08:04:13.135 -08 000000020 INF: ===================Move X Motor without settling===================
17-03-01 08:04:13.136 -08 000000082 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:13.136 -08 000000137 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:13.136 -08 000000020 INF: X Motor: Xmit PR VM\n
17-03-01 08:04:13.136 -08 000000108 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:13.136 -08 000000088 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:13.136 -08 000000094 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:13.136 -08 000000137 INF: Y Motor: Moving to 64.5693 mm @25.000 mm/sec, started at 14.8576 mm
17-03-01 08:04:13.136 -08 000000137 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:13.136 -08 000000137 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:13.136 -08 000000004 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:04:13.137 -08 000000063 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:04:13.137 -08 000000144 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:04:13.137 -08 000000135 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:04:13.137 -08 000000097 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:04:13.137 -08 000000144 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:04:13.137 -08 000000009 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:04:13.137 -08 000000036 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:04:13.137 -08 000000093 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:04:13.137 -08 000000135 INF: ======================================
17-03-01 08:04:13.137 -08 000000036 INF: ======================================
17-03-01 08:04:13.138 -08 000000009 INF: ======================================
17-03-01 08:04:13.138 -08 000000063 INF: ======================================
17-03-01 08:04:13.138 -08 000000093 INF: ======================================
17-03-01 08:04:13.139 -08 000000108 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:13.140 -08 000000094 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:13.140 -08 000000004 INF: ======================================
17-03-01 08:04:13.140 -08 000000097 INF: ======================================
17-03-01 08:04:13.140 -08 000000144 INF: ======================================
17-03-01 08:04:13.140 -08 000000108 INF: ======================================
17-03-01 08:04:13.141 -08 000000094 INF: ======================================
17-03-01 08:04:13.141 -08 000000082 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:13.141 -08 000000088 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:13.142 -08 000000082 INF: ======================================
17-03-01 08:04:13.143 -08 000000088 INF: ======================================
17-03-01 08:04:13.143 -08 000000069 INF: ======================================
17-03-01 08:04:13.153 -08 000000124 INF: FPGA: Recv ZTRG 
17-03-01 08:04:13.153 -08 000000023 INF: FPGA: Xmit ZYT 0 3\n
17-03-01 08:04:13.215 -08 000000130 INF: FPGA: Recv ZYT 
17-03-01 08:04:13.215 -08 000000023 INF: Z Motor: ZMV will trigger camera immediately and ramp is HW controlled
17-03-01 08:04:13.215 -08 000000023 INF: FPGA: Xmit ZMV 38647\n
17-03-01 08:04:13.217 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:04:13.217 -08 000000137 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:13.217 -08 000000137 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:13.217 -08 000000020 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:04:13.217 -08 000000020 INF: X Motor: Xmit PR VI\n
17-03-01 08:04:13.278 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 6\r
17-03-01 08:04:13.278 -08 000000150 INF: FPGA: Recv @LOG Trigger Camera
17-03-01 08:04:13.278 -08 000000006 INF: FPGA: Trigger Camera
17-03-01 08:04:13.278 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:13.278 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Opening shutoff valve===================
17-03-01 08:04:13.279 -08 000000020 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:04:13.279 -08 000000020 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:04:13.279 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:04:13.279 -08 000000137 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:13.279 -08 000000020 INF: X Motor: Moving to 68.5902 mm @15.000 mm/sec, started at 26.0630 mm
17-03-01 08:04:13.279 -08 000000020 INF: X Motor: Xmit MA 3928\n
17-03-01 08:04:13.343 -08 000000080 INF: FPGA: Recv ZMV 
17-03-01 08:04:13.343 -08 000000023 INF: Z Motor: MoveAndTrigger 'ZMV' command took 127.9822 ms
17-03-01 08:04:13.343 -08 000000023 INF: FPGA: Xmit ZDACR\n
17-03-01 08:04:13.345 -08 000000020 INF: X Motor: Recv MA 3928\r\n>
17-03-01 08:04:13.345 -08 000000137 INF: Y Motor: Recv v 0\r
17-03-01 08:04:13.345 -08 000000137 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:13.345 -08 000000020 INF: X Motor: WaitUntilStopped 62835
17-03-01 08:04:13.345 -08 000000137 INF: Y Motor: Set target position to 5956930 encoder counts
17-03-01 08:04:13.345 -08 000000137 INF: Y Motor: Xmit s r0xca 5956930\r
17-03-01 08:04:13.404 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:04:13.404 -08 000000137 INF: Y Motor: Start the move command
17-03-01 08:04:13.404 -08 000000137 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:13.404 -08 000000109 INF: FPGA: Recv ZDACR 38647
17-03-01 08:04:13.405 -08 000000023 INF: Z Motor: MoveAndTrigger took 269.415 ms w/comms
17-03-01 08:04:13.405 -08 000000023 INF: Z Motor: After move to -0.1474, error = 0.0000, min/max error = 0.0000/0.0000, tolerance = 0.0010 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:13.405 -08 000000023 INF: Z Motor: MoveAbsStepped took 269.5845 ms
17-03-01 08:04:13.405 -08 000000023 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:13.407 -08 000000023 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:04:13.408 -08 000000069 INF: ===================TDI Scan Setup===================
17-03-01 08:04:13.408 -08 000000108 INF: ===================Camera Arm TDI===================
17-03-01 08:04:13.408 -08 000000069 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:13.408 -08 000000108 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:13.409 -08 000000069 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:13.409 -08 000000108 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:13.409 -08 000000069 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:13.410 -08 000000069 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:04:13.465 -08 000000105 INF: FPGA: Recv ZSEL 
17-03-01 08:04:13.466 -08 000000069 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:13.466 -08 000000069 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:04:13.467 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:04:13.467 -08 000000137 INF: Y Motor: WaitUntilStopped 61988
17-03-01 08:04:13.467 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:13.527 -08 000000131 INF: FPGA: Recv TDIBB
17-03-01 08:04:13.527 -08 000000069 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:13.529 -08 000000069 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:13.529 -08 000000069 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:13.531 -08 000000069 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:04:13.531 -08 000000069 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:04:13.531 -08 000000069 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:04:13.589 -08 000000080 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:13.589 -08 000000069 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:13.591 -08 000000137 INF: Y Motor: Unshifted Position: 1068125
17-03-01 08:04:13.591 -08 000000069 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:04:13.592 -08 000000069 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:13.593 -08 000000069 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:04:13.593 -08 000000069 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:04:13.593 -08 000000069 INF: Z Motor: Arming to move to -0.1074 mm
17-03-01 08:04:13.593 -08 000000069 INF: FPGA: Xmit ZYT 6436930 4\n
17-03-01 08:04:13.641 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:13.656 -08 000000036 INF: FPGA: Recv ZYT 
17-03-01 08:04:13.656 -08 000000069 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1568125 enc / 15.681 mm / ) = 6436930 enc / 64.369 mm
17-03-01 08:04:13.656 -08 000000069 INF: FPGA: Xmit ZARM 28161\n
17-03-01 08:04:13.717 -08 000000071 INF: FPGA: Recv ZARM
17-03-01 08:04:13.717 -08 000000069 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 61.5972 ms
17-03-01 08:04:13.718 -08 000000069 INF: Z Motor: ArmAbsStepped took 124.2329 ms
17-03-01 08:04:13.718 -08 000000069 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:13.719 -08 000000069 INF: ===================TDI Scan Setup===================
17-03-01 08:04:13.721 -08 000000069 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:04:13.721 -08 000000069 INF: ===================TDI Scan Setup===================
17-03-01 08:04:13.723 -08 000000069 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:04:13.723 -08 000000069 INF: ===================TDI Scan Setup===================
17-03-01 08:04:13.724 -08 000000069 INF: ======================================
17-03-01 08:04:13.768 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:13.905 -08 000000137 INF: Y Motor: Unshifted Position: 1779895
17-03-01 08:04:13.955 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:13.963 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:13.963 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:13.963 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:14.028 -08 000000108 INF: Camera #0 AttachBuffer (imageDataPtr = 56923197488 imgPtr = 56923197488 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:14.028 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:14.029 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:14.030 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:14.038 -08 000000018 INF: KloehnPump A (KLOEHNA): Pumping from 6, aspirate port PortB, aspiration rate 500, dispense rate 2500, volume 95, calling command "Pumping to Flowcell #1 pump index #0", State=Running, Depth=2, Children=0, Thread="Run", Parent="Deblock", Type=SameThreadBlocking, solution delay 5000
17-03-01 08:04:14.044 -08 000000108 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:14.046 -08 000000108 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:14.079 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:14.130 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:04:14.214 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`0 (0x03)\r\n(0xFF)
17-03-01 08:04:14.214 -08 000000018 INF: Current Position of Pump is: 0
17-03-01 08:04:14.215 -08 000000137 INF: Y Motor: Unshifted Position: 2555795
17-03-01 08:04:14.265 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:14.314 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1OR\r
17-03-01 08:04:14.390 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:14.401 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:14.501 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:14.529 -08 000000137 INF: Y Motor: Unshifted Position: 3340745
17-03-01 08:04:14.581 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:14.593 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:14.680 -08 000000108 INF: Camera #2 AttachBuffer (imageDataPtr = 58735136816 imgPtr = 64223121456 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:14.680 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:14.680 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:14.696 -08 000000108 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:14.698 -08 000000108 INF: ===================Camera Arm TDI===================
17-03-01 08:04:14.699 -08 000000108 INF: ======================================
17-03-01 08:04:14.700 -08 000000023 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:14.701 -08 000000023 INF: ======================================
17-03-01 08:04:14.705 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:14.843 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:14.848 -08 000000137 INF: Y Motor: Unshifted Position: 4116626
17-03-01 08:04:14.898 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:14.908 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:15.008 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V10000A0R\r
17-03-01 08:04:15.015 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:15.088 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:15.152 -08 000000137 INF: Y Motor: Unshifted Position: 4896556
17-03-01 08:04:15.188 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:15.202 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:15.275 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:15.275 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Aspirating port PortB===================
17-03-01 08:04:15.327 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:15.375 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V1600IP18240R\r
17-03-01 08:04:15.462 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:15.463 -08 000000137 INF: Y Motor: Unshifted Position: 5675578
17-03-01 08:04:15.513 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:15.562 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:15.638 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:15.651 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:15.776 -08 000000137 INF: Y Motor: Unshifted Position: 5956927
17-03-01 08:04:15.826 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:15.901 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:15.962 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:15.963 -08 000000137 INF: Y Motor: Unshifted Position: 5956919
17-03-01 08:04:15.963 -08 000000137 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:15.963 -08 000000137 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:16.025 -08 000000137 INF: Y Motor: Recv v 0\r
17-03-01 08:04:16.025 -08 000000137 INF: Y Motor: Moved to 64.5692 after 2558 ms
17-03-01 08:04:16.025 -08 000000137 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:16.089 -08 000000137 INF: Y Motor: Recv v 4096\r
17-03-01 08:04:16.089 -08 000000137 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:16.089 -08 000000137 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:16.151 -08 000000137 INF: Y Motor: Recv v 0\r
17-03-01 08:04:16.151 -08 000000137 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:16.151 -08 000000137 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:16.212 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:16.214 -08 000000137 INF: Y Motor: Recv v 402653184\r
17-03-01 08:04:16.214 -08 000000137 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:04:16.214 -08 000000137 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:16.214 -08 000000137 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:16.275 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:16.276 -08 000000137 INF: Y Motor: Recv v 0\r
17-03-01 08:04:16.276 -08 000000137 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:16.276 -08 000000137 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:16.276 -08 000000137 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:16.338 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:04:16.338 -08 000000137 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:16.338 -08 000000137 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:16.400 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:04:16.400 -08 000000137 INF: ======================================
17-03-01 08:04:16.525 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:16.587 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:16.775 -08 000000020 INF: X Motor: Xmit PR ER\n
17-03-01 08:04:16.837 -08 000000020 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:04:16.837 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:16.837 -08 000000020 INF: X Motor: Moved to 68.5898 after 3492 ms
17-03-01 08:04:16.837 -08 000000020 INF: ======================================
17-03-01 08:04:16.838 -08 000000153 INF: ===================Move X,Y===================
17-03-01 08:04:16.840 -08 000000153 INF: ======================================
17-03-01 08:04:16.841 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:16.841 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:16.841 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:04:16.841 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:04:16.898 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:16.899 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:04:16.899 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:04:16.959 -08 000000040 INF: FPGA: Recv ZFREQCL
17-03-01 08:04:16.959 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:04:16.960 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:16.960 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:17.021 -08 000000023 INF: FPGA: Recv TDIYERD 6456931
17-03-01 08:04:17.021 -08 000000042 INF: Before scan, Y encoder from FPGA = 6456931 counts (64.569 mm)
17-03-01 08:04:17.022 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:17.022 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:17.023 -08 000000067 INF: ===================Set YMotor gains for scans===================
17-03-01 08:04:17.023 -08 000000097 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:17.023 -08 000000067 INF: ======================================
17-03-01 08:04:17.024 -08 000000097 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:17.025 -08 000000097 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:04:17.025 -08 000000097 INF: FPGA: Xmit TDIYPOS 6346005\n
17-03-01 08:04:17.083 -08 000000135 INF: FPGA: Recv TDIYPOS
17-03-01 08:04:17.083 -08 000000097 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:17.085 -08 000000097 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:04:17.085 -08 000000097 INF: FPGA: Xmit TDIYARM3 139264 6436930 1 1\n
17-03-01 08:04:17.148 -08 000000137 INF: FPGA: Recv TDIYARM3
17-03-01 08:04:17.148 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:17.148 -08 000000097 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:17.149 -08 000000097 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:17.150 -08 000000097 INF: ======================================
17-03-01 08:04:17.151 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:17.152 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:17.152 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:17.153 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:17.153 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:17.154 -08 000000119 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:04:17.154 -08 000000062 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:04:17.154 -08 000000119 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:04:17.154 -08 000000119 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:04:17.154 -08 000000119 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:04:17.154 -08 000000062 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:04:17.154 -08 000000119 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:04:17.154 -08 000000062 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:04:17.154 -08 000000062 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:04:17.155 -08 000000062 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:04:17.209 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:17.459 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:17.502 -08 000000148 INF: RunCopyService queue size at 3/1/2017 8:04:17 AM is 0
17-03-01 08:04:17.520 -08 000000046 INF: FPGA: Recv EX2MV
17-03-01 08:04:17.520 -08 000000046 INF: FPGA: Recv EX1MV
17-03-01 08:04:17.520 -08 000000062 INF: Excitation Filter 1: Moved -107 steps in 365.6783 ms
17-03-01 08:04:17.520 -08 000000119 INF: Excitation Filter 2: Moved -107 steps in 365.8692 ms
17-03-01 08:04:17.520 -08 000000062 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 365.8327 ms
17-03-01 08:04:17.520 -08 000000062 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 365.9532 ms
17-03-01 08:04:17.520 -08 000000119 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 365.9742 ms
17-03-01 08:04:17.520 -08 000000119 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 366.1529 ms
17-03-01 08:04:17.520 -08 000000062 INF: ======================================
17-03-01 08:04:17.520 -08 000000119 INF: ======================================
17-03-01 08:04:17.521 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:17.522 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:17.523 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:17.524 -08 000000061 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:17.524 -08 000000151 INF: ===================FPGA Z Wait===================
17-03-01 08:04:17.524 -08 000000054 INF: ===================Camera TDI===================
17-03-01 08:04:17.524 -08 000000082 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:17.524 -08 000000082 INF: Y Motor: Moving to 14.9210 mm @6.500 mm/sec, started at 64.5692 mm
17-03-01 08:04:17.524 -08 000000151 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:04:17.524 -08 000000082 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:17.524 -08 000000082 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:17.524 -08 000000061 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:04:17.524 -08 000000054 INF: ===================Camera TDI, Parallel===================
17-03-01 08:04:17.525 -08 000000061 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:04:17.525 -08 000000036 INF: ===================Camera TDI===================
17-03-01 08:04:17.525 -08 000000118 INF: ===================Camera TDI===================
17-03-01 08:04:17.527 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:17.527 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:17.527 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:17.527 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:17.643 -08 000000082 INF: Y Motor: Recv ok\r
17-03-01 08:04:17.643 -08 000000082 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:17.643 -08 000000082 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:17.677 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:17.677 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:17.677 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:17.677 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:17.696 -08 000000082 INF: Y Motor: Recv ok\r
17-03-01 08:04:17.696 -08 000000082 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:17.760 -08 000000082 INF: Y Motor: Recv v 0\r
17-03-01 08:04:17.760 -08 000000082 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:17.760 -08 000000082 INF: Y Motor: Set target position to 992097 encoder counts
17-03-01 08:04:17.760 -08 000000082 INF: Y Motor: Xmit s r0xca 992097\r
17-03-01 08:04:17.771 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:17.819 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:17.820 -08 000000082 INF: Y Motor: Recv ok\r
17-03-01 08:04:17.820 -08 000000082 INF: Y Motor: Start the move command
17-03-01 08:04:17.820 -08 000000082 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:17.827 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:17.827 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:17.827 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:17.827 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:17.882 -08 000000082 INF: Y Motor: Recv ok\r
17-03-01 08:04:17.882 -08 000000082 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:04:17.882 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:17.942 -08 000000134 INF: FPGA: Recv ZWAIT 
17-03-01 08:04:17.943 -08 000000151 INF: ======================================
17-03-01 08:04:17.977 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 2, frameCount = 3.
17-03-01 08:04:17.977 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 3
17-03-01 08:04:17.977 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 2, frameCount = 3.
17-03-01 08:04:17.977 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 3
17-03-01 08:04:17.977 -08 000000036 INF: ===================Camera #0 Frame #3===================
17-03-01 08:04:17.977 -08 000000118 INF: ===================Camera #2 Frame #3===================
17-03-01 08:04:18.008 -08 000000082 INF: Y Motor: Unshifted Position: 5895078
17-03-01 08:04:18.058 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.069 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:18.131 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:18.137 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 8, frameCount = 9.
17-03-01 08:04:18.137 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 9
17-03-01 08:04:18.137 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 8, frameCount = 9.
17-03-01 08:04:18.137 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 9
17-03-01 08:04:18.137 -08 000000036 INF: ===================Camera #0 Frame #9===================
17-03-01 08:04:18.137 -08 000000118 INF: ===================Camera #2 Frame #9===================
17-03-01 08:04:18.182 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.307 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 14, frameCount = 15.
17-03-01 08:04:18.307 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 15
17-03-01 08:04:18.307 -08 000000036 INF: ===================Camera #0 Frame #15===================
17-03-01 08:04:18.308 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 14, frameCount = 15.
17-03-01 08:04:18.308 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 15
17-03-01 08:04:18.308 -08 000000118 INF: ===================Camera #2 Frame #15===================
17-03-01 08:04:18.320 -08 000000082 INF: Y Motor: Unshifted Position: 5692713
17-03-01 08:04:18.370 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.381 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:18.443 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:18.476 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 20, frameCount = 21.
17-03-01 08:04:18.476 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 21
17-03-01 08:04:18.476 -08 000000036 INF: ===================Camera #0 Frame #21===================
17-03-01 08:04:18.478 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 20, frameCount = 21.
17-03-01 08:04:18.478 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 21
17-03-01 08:04:18.478 -08 000000118 INF: ===================Camera #2 Frame #21===================
17-03-01 08:04:18.494 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.632 -08 000000082 INF: Y Motor: Unshifted Position: 5489266
17-03-01 08:04:18.646 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 26, frameCount = 27.
17-03-01 08:04:18.646 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 27
17-03-01 08:04:18.646 -08 000000036 INF: ===================Camera #0 Frame #27===================
17-03-01 08:04:18.649 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 26, frameCount = 27.
17-03-01 08:04:18.649 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 27
17-03-01 08:04:18.649 -08 000000118 INF: ===================Camera #2 Frame #27===================
17-03-01 08:04:18.682 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.693 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:18.757 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:18.807 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.816 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 33, frameCount = 34.
17-03-01 08:04:18.816 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 34
17-03-01 08:04:18.816 -08 000000036 INF: ===================Camera #0 Frame #34===================
17-03-01 08:04:18.820 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 33, frameCount = 34.
17-03-01 08:04:18.820 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 34
17-03-01 08:04:18.820 -08 000000118 INF: ===================Camera #2 Frame #34===================
17-03-01 08:04:18.942 -08 000000082 INF: Y Motor: Unshifted Position: 5286461
17-03-01 08:04:18.989 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 39, frameCount = 40.
17-03-01 08:04:18.989 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 40
17-03-01 08:04:18.989 -08 000000036 INF: ===================Camera #0 Frame #40===================
17-03-01 08:04:18.992 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:18.994 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 39, frameCount = 40.
17-03-01 08:04:18.994 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 40
17-03-01 08:04:18.994 -08 000000118 INF: ===================Camera #2 Frame #40===================
17-03-01 08:04:19.007 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:19.067 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:19.118 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:19.159 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 45, frameCount = 46.
17-03-01 08:04:19.159 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 46
17-03-01 08:04:19.159 -08 000000036 INF: ===================Camera #0 Frame #46===================
17-03-01 08:04:19.164 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 45, frameCount = 46.
17-03-01 08:04:19.164 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 46
17-03-01 08:04:19.164 -08 000000118 INF: ===================Camera #2 Frame #46===================
17-03-01 08:04:19.256 -08 000000082 INF: Y Motor: Unshifted Position: 5082793
17-03-01 08:04:19.306 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:19.317 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:19.328 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 51, frameCount = 52.
17-03-01 08:04:19.328 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 53
17-03-01 08:04:19.328 -08 000000036 INF: ===================Camera #0 Frame #53===================
17-03-01 08:04:19.334 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 52, frameCount = 53.
17-03-01 08:04:19.334 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 53
17-03-01 08:04:19.334 -08 000000118 INF: ===================Camera #2 Frame #53===================
17-03-01 08:04:19.377 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:19.428 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:19.501 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 58, frameCount = 59.
17-03-01 08:04:19.501 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 59
17-03-01 08:04:19.501 -08 000000036 INF: ===================Camera #0 Frame #59===================
17-03-01 08:04:19.507 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 58, frameCount = 59.
17-03-01 08:04:19.507 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 59
17-03-01 08:04:19.507 -08 000000118 INF: ===================Camera #2 Frame #59===================
17-03-01 08:04:19.568 -08 000000082 INF: Y Motor: Unshifted Position: 4880424
17-03-01 08:04:19.618 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:19.627 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:19.671 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 64, frameCount = 65.
17-03-01 08:04:19.671 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 65
17-03-01 08:04:19.671 -08 000000036 INF: ===================Camera #0 Frame #65===================
17-03-01 08:04:19.677 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 64, frameCount = 65.
17-03-01 08:04:19.677 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 65
17-03-01 08:04:19.677 -08 000000118 INF: ===================Camera #2 Frame #65===================
17-03-01 08:04:19.691 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:19.742 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:19.840 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 70, frameCount = 71.
17-03-01 08:04:19.840 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 71
17-03-01 08:04:19.840 -08 000000036 INF: ===================Camera #0 Frame #71===================
17-03-01 08:04:19.847 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 71, frameCount = 72.
17-03-01 08:04:19.847 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 72
17-03-01 08:04:19.847 -08 000000118 INF: ===================Camera #2 Frame #72===================
17-03-01 08:04:19.880 -08 000000082 INF: Y Motor: Unshifted Position: 4676978
17-03-01 08:04:19.930 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:19.941 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:20.002 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:20.010 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 77, frameCount = 78.
17-03-01 08:04:20.010 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 78
17-03-01 08:04:20.010 -08 000000036 INF: ===================Camera #0 Frame #78===================
17-03-01 08:04:20.021 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 77, frameCount = 78.
17-03-01 08:04:20.021 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 78
17-03-01 08:04:20.021 -08 000000118 INF: ===================Camera #2 Frame #78===================
17-03-01 08:04:20.053 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:20.183 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 83, frameCount = 84.
17-03-01 08:04:20.183 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 84
17-03-01 08:04:20.183 -08 000000036 INF: ===================Camera #0 Frame #84===================
17-03-01 08:04:20.191 -08 000000082 INF: Y Motor: Unshifted Position: 4475244
17-03-01 08:04:20.191 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 83, frameCount = 84.
17-03-01 08:04:20.191 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 84
17-03-01 08:04:20.191 -08 000000118 INF: ===================Camera #2 Frame #84===================
17-03-01 08:04:20.241 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:20.252 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:20.313 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:20.352 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 89, frameCount = 90.
17-03-01 08:04:20.352 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 90
17-03-01 08:04:20.352 -08 000000036 INF: ===================Camera #0 Frame #90===================
17-03-01 08:04:20.361 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 90, frameCount = 91.
17-03-01 08:04:20.361 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 91
17-03-01 08:04:20.361 -08 000000118 INF: ===================Camera #2 Frame #91===================
17-03-01 08:04:20.364 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:20.502 -08 000000082 INF: Y Motor: Unshifted Position: 4271802
17-03-01 08:04:20.521 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 95, frameCount = 96.
17-03-01 08:04:20.521 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 96
17-03-01 08:04:20.521 -08 000000036 INF: ===================Camera #0 Frame #96===================
17-03-01 08:04:20.534 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 96, frameCount = 97.
17-03-01 08:04:20.534 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 97
17-03-01 08:04:20.534 -08 000000118 INF: ===================Camera #2 Frame #97===================
17-03-01 08:04:20.552 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:20.563 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:20.625 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:20.676 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:20.690 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 102, frameCount = 103.
17-03-01 08:04:20.690 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 103
17-03-01 08:04:20.690 -08 000000036 INF: ===================Camera #0 Frame #103===================
17-03-01 08:04:20.703 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 102, frameCount = 103.
17-03-01 08:04:20.703 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 103
17-03-01 08:04:20.703 -08 000000118 INF: ===================Camera #2 Frame #103===================
17-03-01 08:04:20.816 -08 000000082 INF: Y Motor: Unshifted Position: 4068345
17-03-01 08:04:20.862 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 108, frameCount = 109.
17-03-01 08:04:20.862 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 109
17-03-01 08:04:20.862 -08 000000036 INF: ===================Camera #0 Frame #109===================
17-03-01 08:04:20.866 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:20.873 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 108, frameCount = 109.
17-03-01 08:04:20.873 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 109
17-03-01 08:04:20.873 -08 000000118 INF: ===================Camera #2 Frame #109===================
17-03-01 08:04:20.875 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:20.937 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:20.988 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:21.031 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 114, frameCount = 115.
17-03-01 08:04:21.031 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 115
17-03-01 08:04:21.032 -08 000000036 INF: ===================Camera #0 Frame #115===================
17-03-01 08:04:21.042 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 115, frameCount = 116.
17-03-01 08:04:21.042 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 116
17-03-01 08:04:21.042 -08 000000118 INF: ===================Camera #2 Frame #116===================
17-03-01 08:04:21.126 -08 000000082 INF: Y Motor: Unshifted Position: 3865980
17-03-01 08:04:21.176 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:21.187 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:21.202 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 120, frameCount = 121.
17-03-01 08:04:21.202 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 121
17-03-01 08:04:21.202 -08 000000036 INF: ===================Camera #0 Frame #121===================
17-03-01 08:04:21.216 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 121, frameCount = 122.
17-03-01 08:04:21.216 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 122
17-03-01 08:04:21.216 -08 000000118 INF: ===================Camera #2 Frame #122===================
17-03-01 08:04:21.251 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:21.302 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:21.370 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 127, frameCount = 128.
17-03-01 08:04:21.370 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 128
17-03-01 08:04:21.370 -08 000000036 INF: ===================Camera #0 Frame #128===================
17-03-01 08:04:21.385 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 127, frameCount = 128.
17-03-01 08:04:21.385 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 128
17-03-01 08:04:21.385 -08 000000118 INF: ===================Camera #2 Frame #128===================
17-03-01 08:04:21.440 -08 000000082 INF: Y Motor: Unshifted Position: 3663610
17-03-01 08:04:21.490 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:21.501 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:21.542 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 133, frameCount = 134.
17-03-01 08:04:21.542 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 134
17-03-01 08:04:21.542 -08 000000036 INF: ===================Camera #0 Frame #134===================
17-03-01 08:04:21.555 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 133, frameCount = 134.
17-03-01 08:04:21.555 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 134
17-03-01 08:04:21.555 -08 000000118 INF: ===================Camera #2 Frame #134===================
17-03-01 08:04:21.561 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:21.612 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:21.711 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 139, frameCount = 140.
17-03-01 08:04:21.711 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 140
17-03-01 08:04:21.711 -08 000000036 INF: ===================Camera #0 Frame #140===================
17-03-01 08:04:21.725 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 140, frameCount = 141.
17-03-01 08:04:21.725 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 141
17-03-01 08:04:21.725 -08 000000118 INF: ===================Camera #2 Frame #141===================
17-03-01 08:04:21.750 -08 000000082 INF: Y Motor: Unshifted Position: 3458866
17-03-01 08:04:21.800 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:21.811 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:21.875 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:21.880 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 145, frameCount = 146.
17-03-01 08:04:21.880 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 146
17-03-01 08:04:21.880 -08 000000036 INF: ===================Camera #0 Frame #146===================
17-03-01 08:04:21.899 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 146, frameCount = 147.
17-03-01 08:04:21.899 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 147
17-03-01 08:04:21.899 -08 000000118 INF: ===================Camera #2 Frame #147===================
17-03-01 08:04:21.926 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.049 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 152, frameCount = 153.
17-03-01 08:04:22.049 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 153
17-03-01 08:04:22.049 -08 000000036 INF: ===================Camera #0 Frame #153===================
17-03-01 08:04:22.064 -08 000000082 INF: Y Motor: Unshifted Position: 3256719
17-03-01 08:04:22.070 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 152, frameCount = 153.
17-03-01 08:04:22.070 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 153
17-03-01 08:04:22.070 -08 000000118 INF: ===================Camera #2 Frame #153===================
17-03-01 08:04:22.114 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.125 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:22.186 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:22.221 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 158, frameCount = 159.
17-03-01 08:04:22.221 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 159
17-03-01 08:04:22.221 -08 000000036 INF: ===================Camera #0 Frame #159===================
17-03-01 08:04:22.239 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.241 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 159, frameCount = 160.
17-03-01 08:04:22.241 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 160
17-03-01 08:04:22.241 -08 000000118 INF: ===================Camera #2 Frame #160===================
17-03-01 08:04:22.375 -08 000000082 INF: Y Motor: Unshifted Position: 3055008
17-03-01 08:04:22.391 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 164, frameCount = 165.
17-03-01 08:04:22.391 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 165
17-03-01 08:04:22.391 -08 000000036 INF: ===================Camera #0 Frame #165===================
17-03-01 08:04:22.415 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 165, frameCount = 166.
17-03-01 08:04:22.415 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 166
17-03-01 08:04:22.415 -08 000000118 INF: ===================Camera #2 Frame #166===================
17-03-01 08:04:22.425 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.436 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:22.498 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:22.549 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.561 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 171, frameCount = 172.
17-03-01 08:04:22.561 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 172
17-03-01 08:04:22.561 -08 000000036 INF: ===================Camera #0 Frame #172===================
17-03-01 08:04:22.586 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 171, frameCount = 172.
17-03-01 08:04:22.586 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 172
17-03-01 08:04:22.586 -08 000000118 INF: ===================Camera #2 Frame #172===================
17-03-01 08:04:22.687 -08 000000082 INF: Y Motor: Unshifted Position: 2849393
17-03-01 08:04:22.734 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 177, frameCount = 178.
17-03-01 08:04:22.734 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 178
17-03-01 08:04:22.734 -08 000000036 INF: ===================Camera #0 Frame #178===================
17-03-01 08:04:22.737 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.748 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:22.757 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 178, frameCount = 179.
17-03-01 08:04:22.757 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 179
17-03-01 08:04:22.757 -08 000000118 INF: ===================Camera #2 Frame #179===================
17-03-01 08:04:22.810 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:22.861 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:22.904 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 183, frameCount = 184.
17-03-01 08:04:22.904 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 184
17-03-01 08:04:22.904 -08 000000036 INF: ===================Camera #0 Frame #184===================
17-03-01 08:04:22.931 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 184, frameCount = 185.
17-03-01 08:04:22.931 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 185
17-03-01 08:04:22.931 -08 000000118 INF: ===================Camera #2 Frame #185===================
17-03-01 08:04:22.999 -08 000000082 INF: Y Motor: Unshifted Position: 2648548
17-03-01 08:04:23.049 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.060 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:23.074 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 189, frameCount = 190.
17-03-01 08:04:23.074 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 190
17-03-01 08:04:23.074 -08 000000036 INF: ===================Camera #0 Frame #190===================
17-03-01 08:04:23.101 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 190, frameCount = 191.
17-03-01 08:04:23.101 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 191
17-03-01 08:04:23.101 -08 000000118 INF: ===================Camera #2 Frame #191===================
17-03-01 08:04:23.121 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:23.172 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.242 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 196, frameCount = 197.
17-03-01 08:04:23.242 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 197
17-03-01 08:04:23.242 -08 000000036 INF: ===================Camera #0 Frame #197===================
17-03-01 08:04:23.270 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 197, frameCount = 198.
17-03-01 08:04:23.270 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 198
17-03-01 08:04:23.270 -08 000000118 INF: ===================Camera #2 Frame #198===================
17-03-01 08:04:23.310 -08 000000082 INF: Y Motor: Unshifted Position: 2445524
17-03-01 08:04:23.360 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.371 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:23.415 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 202, frameCount = 203.
17-03-01 08:04:23.415 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 203
17-03-01 08:04:23.415 -08 000000036 INF: ===================Camera #0 Frame #203===================
17-03-01 08:04:23.435 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:23.444 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 203, frameCount = 204.
17-03-01 08:04:23.444 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 204
17-03-01 08:04:23.444 -08 000000118 INF: ===================Camera #2 Frame #204===================
17-03-01 08:04:23.486 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.584 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 208, frameCount = 209.
17-03-01 08:04:23.584 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 209
17-03-01 08:04:23.584 -08 000000036 INF: ===================Camera #0 Frame #209===================
17-03-01 08:04:23.614 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 209, frameCount = 210.
17-03-01 08:04:23.614 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 210
17-03-01 08:04:23.614 -08 000000118 INF: ===================Camera #2 Frame #210===================
17-03-01 08:04:23.623 -08 000000082 INF: Y Motor: Unshifted Position: 2242084
17-03-01 08:04:23.673 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.685 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:23.747 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:23.754 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 214, frameCount = 215.
17-03-01 08:04:23.754 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 215
17-03-01 08:04:23.754 -08 000000036 INF: ===================Camera #0 Frame #215===================
17-03-01 08:04:23.784 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 216, frameCount = 217.
17-03-01 08:04:23.784 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 217
17-03-01 08:04:23.784 -08 000000118 INF: ===================Camera #2 Frame #217===================
17-03-01 08:04:23.798 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.924 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 221, frameCount = 222.
17-03-01 08:04:23.924 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 222
17-03-01 08:04:23.924 -08 000000036 INF: ===================Camera #0 Frame #222===================
17-03-01 08:04:23.933 -08 000000082 INF: Y Motor: Unshifted Position: 2040366
17-03-01 08:04:23.958 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 222, frameCount = 223.
17-03-01 08:04:23.958 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 223
17-03-01 08:04:23.958 -08 000000118 INF: ===================Camera #2 Frame #223===================
17-03-01 08:04:23.983 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:23.997 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:24.058 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:24.096 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 227, frameCount = 228.
17-03-01 08:04:24.096 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 228
17-03-01 08:04:24.096 -08 000000036 INF: ===================Camera #0 Frame #228===================
17-03-01 08:04:24.109 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:24.129 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 228, frameCount = 229.
17-03-01 08:04:24.129 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 229
17-03-01 08:04:24.129 -08 000000118 INF: ===================Camera #2 Frame #229===================
17-03-01 08:04:24.247 -08 000000082 INF: Y Motor: Unshifted Position: 1836035
17-03-01 08:04:24.266 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 233, frameCount = 234.
17-03-01 08:04:24.266 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 234
17-03-01 08:04:24.266 -08 000000036 INF: ===================Camera #0 Frame #234===================
17-03-01 08:04:24.297 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:24.300 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 235, frameCount = 236.
17-03-01 08:04:24.300 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 236
17-03-01 08:04:24.300 -08 000000118 INF: ===================Camera #2 Frame #236===================
17-03-01 08:04:24.308 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:24.370 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:24.421 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:24.436 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 240, frameCount = 241.
17-03-01 08:04:24.436 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 241
17-03-01 08:04:24.436 -08 000000036 INF: ===================Camera #0 Frame #241===================
17-03-01 08:04:24.474 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 241, frameCount = 242.
17-03-01 08:04:24.474 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 242
17-03-01 08:04:24.474 -08 000000118 INF: ===================Camera #2 Frame #242===================
17-03-01 08:04:24.559 -08 000000082 INF: Y Motor: Unshifted Position: 1634542
17-03-01 08:04:24.609 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:24.609 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 246, frameCount = 247.
17-03-01 08:04:24.609 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 247
17-03-01 08:04:24.609 -08 000000036 INF: ===================Camera #0 Frame #247===================
17-03-01 08:04:24.620 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:24.644 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 247, frameCount = 248.
17-03-01 08:04:24.644 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 248
17-03-01 08:04:24.644 -08 000000118 INF: ===================Camera #2 Frame #248===================
17-03-01 08:04:24.682 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:24.733 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:24.778 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 252, frameCount = 253.
17-03-01 08:04:24.778 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 253
17-03-01 08:04:24.778 -08 000000036 INF: ===================Camera #0 Frame #253===================
17-03-01 08:04:24.814 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 253, frameCount = 254.
17-03-01 08:04:24.814 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 254
17-03-01 08:04:24.814 -08 000000118 INF: ===================Camera #2 Frame #254===================
17-03-01 08:04:24.871 -08 000000082 INF: Y Motor: Unshifted Position: 1429137
17-03-01 08:04:24.921 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:24.932 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:24.948 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 258, frameCount = 259.
17-03-01 08:04:24.948 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 259
17-03-01 08:04:24.948 -08 000000036 INF: ===================Camera #0 Frame #259===================
17-03-01 08:04:24.984 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 260, frameCount = 261.
17-03-01 08:04:24.984 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 261
17-03-01 08:04:24.984 -08 000000118 INF: ===================Camera #2 Frame #261===================
17-03-01 08:04:24.995 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:25.045 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:25.117 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 265, frameCount = 266.
17-03-01 08:04:25.117 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 266
17-03-01 08:04:25.117 -08 000000036 INF: ===================Camera #0 Frame #266===================
17-03-01 08:04:25.158 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 266, frameCount = 267.
17-03-01 08:04:25.158 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 267
17-03-01 08:04:25.158 -08 000000118 INF: ===================Camera #2 Frame #267===================
17-03-01 08:04:25.183 -08 000000082 INF: Y Motor: Unshifted Position: 1228931
17-03-01 08:04:25.233 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:25.245 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:25.289 -08 000000036 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:04:25.289 -08 000000036 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:04:25.289 -08 000000036 INF: ===================Camera #0 Frame #272===================
17-03-01 08:04:25.306 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:25.306 -08 000000060 INF: FPGA: Recv TDIYWAIT
17-03-01 08:04:25.307 -08 000000061 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:25.307 -08 000000036 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:04:25.308 -08 000000036 INF: ===================CameraTDI Cleanup===================
17-03-01 08:04:25.308 -08 000000061 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:04:25.309 -08 000000154 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:04:25.309 -08 000000134 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:04:25.309 -08 000000154 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:04:25.310 -08 000000154 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:04:25.310 -08 000000154 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:04:25.310 -08 000000154 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:04:25.310 -08 000000134 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:04:25.310 -08 000000134 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:04:25.310 -08 000000134 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:04:25.311 -08 000000134 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:04:25.358 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:25.467 -08 000000036 INF: Camera #0 ReleaseBuffer
17-03-01 08:04:25.467 -08 000000118 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:04:25.467 -08 000000118 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:04:25.467 -08 000000118 INF: ===================Camera #2 Frame #272===================
17-03-01 08:04:25.467 -08 000000036 INF: ===================Camera TDI===================
17-03-01 08:04:25.484 -08 000000118 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:04:25.485 -08 000000118 INF: ===================CameraTDI Cleanup===================
17-03-01 08:04:25.494 -08 000000082 INF: Y Motor: Unshifted Position: 1025052
17-03-01 08:04:25.496 -08 000000036 INF: ======================================
17-03-01 08:04:25.544 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:25.556 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:25.619 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:25.676 -08 000000118 INF: Camera #2 ReleaseBuffer
17-03-01 08:04:25.676 -08 000000118 INF: ===================Camera TDI===================
17-03-01 08:04:25.680 -08 000000063 INF: FPGA: Recv EX1MV
17-03-01 08:04:25.680 -08 000000063 INF: FPGA: Recv EX2MV
17-03-01 08:04:25.680 -08 000000154 INF: Excitation Filter 1: Moved 107 steps in 370.3552 ms
17-03-01 08:04:25.680 -08 000000134 INF: Excitation Filter 2: Moved 107 steps in 370.2096 ms
17-03-01 08:04:25.680 -08 000000154 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 370.4719 ms
17-03-01 08:04:25.680 -08 000000154 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 370.5821 ms
17-03-01 08:04:25.680 -08 000000134 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 370.3453 ms
17-03-01 08:04:25.680 -08 000000134 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 370.554 ms
17-03-01 08:04:25.680 -08 000000154 INF: ======================================
17-03-01 08:04:25.680 -08 000000134 INF: ======================================
17-03-01 08:04:25.682 -08 000000082 INF: Y Motor: Unshifted Position: 992096
17-03-01 08:04:25.682 -08 000000082 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:25.682 -08 000000082 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:25.682 -08 000000061 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:25.683 -08 000000061 INF: ======================================
17-03-01 08:04:25.708 -08 000000118 INF: ======================================
17-03-01 08:04:25.709 -08 000000054 INF: ===================Camera TDI===================
17-03-01 08:04:25.711 -08 000000054 INF: ======================================
17-03-01 08:04:25.745 -08 000000082 INF: Y Motor: Recv v 0\r
17-03-01 08:04:25.745 -08 000000082 INF: Y Motor: Moved to 14.9210 after 7863 ms
17-03-01 08:04:25.745 -08 000000082 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:25.807 -08 000000082 INF: Y Motor: Recv v 4097\r
17-03-01 08:04:25.807 -08 000000082 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:25.807 -08 000000082 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:25.869 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:25.870 -08 000000082 INF: Y Motor: Recv v 0\r
17-03-01 08:04:25.870 -08 000000082 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:25.870 -08 000000082 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:25.931 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:25.932 -08 000000082 INF: Y Motor: Recv v 134217728\r
17-03-01 08:04:25.932 -08 000000082 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:04:25.932 -08 000000082 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:25.932 -08 000000082 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:25.994 -08 000000082 INF: Y Motor: Recv v 0\r
17-03-01 08:04:25.994 -08 000000082 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:25.994 -08 000000082 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:25.994 -08 000000082 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:26.055 -08 000000082 INF: Y Motor: Recv ok\r
17-03-01 08:04:26.055 -08 000000082 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:26.055 -08 000000082 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:26.117 -08 000000082 INF: Y Motor: Recv ok\r
17-03-01 08:04:26.117 -08 000000082 INF: ======================================
17-03-01 08:04:26.118 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:26.119 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:26.120 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.120 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:04:26.179 -08 000000040 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:04:26.179 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:26.181 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:26.241 -08 000000071 INF: FPGA: Recv TDIYERD 1492098
17-03-01 08:04:26.241 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:04:26.242 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:26.305 -08 000000137 INF: FPGA: Recv ZADCR 31546
17-03-01 08:04:26.305 -08 000000042 INF: At scan end Y pos = 14.921 and Z pos = -0.121. Y moved -48.539 mm
17-03-01 08:04:26.305 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:04:26.365 -08 000000069 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:04:26.365 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:04:26.365 -08 000000042 INF: TDIScan finished after 13251.213 ms
17-03-01 08:04:26.365 -08 000000042 INF: Image[0]: Y should trigger at 63.460 mm, 2nd row was at 64.369 mm (error = 0.909 mm)
17-03-01 08:04:26.365 -08 000000042 INF: Image[2]: Y should trigger at 63.460 mm, 2nd row was at 64.369 mm (error = 0.909 mm)
17-03-01 08:04:26.367 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.402 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.859 um
17-03-01 08:04:26.402 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.403 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:04:26.427 -08 000000095 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:04:26.427 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.428 -08 000000104 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:04:26.428 -08 000000054 INF: ===================Dither Clean Up Command===================
17-03-01 08:04:26.428 -08 000000124 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:04:26.428 -08 000000135 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:04:26.428 -08 000000135 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:04:26.429 -08 000000104 INF: ======================================
17-03-01 08:04:26.429 -08 000000135 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:04:26.429 -08 000000124 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:04:26.429 -08 000000124 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:04:26.430 -08 000000067 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:26.430 -08 000000088 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:04:26.430 -08 000000088 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:04:26.433 -08 000000067 INF: ===================LFT:Extracting coords===================
17-03-01 08:04:26.458 -08 000000067 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:26.459 -08 000000067 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:04:26.460 -08 000000113 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.460 -08 000000071 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.460 -08 000000109 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.460 -08 000000140 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.460 -08 000000113 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:26.460 -08 000000109 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:26.460 -08 000000140 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:26.461 -08 000000071 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:26.492 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:26.492 -08 000000150 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:26.492 -08 000000150 INF: FPGA: Recv ZSEL 
17-03-01 08:04:26.492 -08 000000088 INF: FPGA: Xmit ZDACW 38647\n
17-03-01 08:04:26.492 -08 000000135 INF: ======================================
17-03-01 08:04:26.495 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:04:26.495 -08 000000124 INF: ======================================
17-03-01 08:04:26.534 -08 000000113 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:26.534 -08 000000109 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:26.535 -08 000000071 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:26.537 -08 000000140 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:26.554 -08 000000122 INF: FPGA: Recv ZDACW 
17-03-01 08:04:26.555 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:26.555 -08 000000088 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:04:26.555 -08 000000088 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:04:26.616 -08 000000131 INF: FPGA: Recv TDIBB
17-03-01 08:04:26.616 -08 000000088 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:04:26.617 -08 000000088 INF: ======================================
17-03-01 08:04:26.686 -08 000000113 INF: LFT found best fwhm score 2.001035 in 152 ms
17-03-01 08:04:26.686 -08 000000113 INF: LFT found good score at index 1989 with fwhm value 2.001035. Next cycle, cycle 53 starting Z position for top surface is at -0.151 mm FC:B, C:52,L:1,T
17-03-01 08:04:26.686 -08 000000113 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.686 -08 000000109 INF: LFT found best fwhm score 2.17222 in 151 ms
17-03-01 08:04:26.686 -08 000000109 INF: LFT found good score at index 4569 with fwhm value 2.17222. Next cycle, cycle 53 starting Z position for top surface is at -0.150 mm FC:B, C:52,L:1,T
17-03-01 08:04:26.686 -08 000000113 INF: ======================================
17-03-01 08:04:26.686 -08 000000109 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.687 -08 000000109 INF: ======================================
17-03-01 08:04:26.687 -08 000000071 INF: LFT found best fwhm score 2.000014 in 152 ms
17-03-01 08:04:26.687 -08 000000071 INF: LFT found good score at index 4813 with fwhm value 2.000014. Next cycle, cycle 53 starting Z position for top surface is at -0.150 mm FC:B, C:52,L:1,T
17-03-01 08:04:26.687 -08 000000071 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.687 -08 000000071 INF: ======================================
17-03-01 08:04:26.692 -08 000000140 INF: LFT found best fwhm score 2.000008 in 154 ms
17-03-01 08:04:26.692 -08 000000140 INF: LFT found good score at index 7397 with fwhm value 2.000008. Next cycle, cycle 53 starting Z position for top surface is at -0.150 mm FC:B, C:52,L:1,T
17-03-01 08:04:26.692 -08 000000140 INF: ===================LookupFocusTracking===================
17-03-01 08:04:26.692 -08 000000140 INF: ======================================
17-03-01 08:04:26.693 -08 000000067 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:26.694 -08 000000067 INF: LFT weighted average best Z for top surface is at -0.150mm FC:B, C:52,L:1,T
17-03-01 08:04:26.695 -08 000000067 INF: ======================================
17-03-01 08:04:26.696 -08 000000054 INF: ======================================
17-03-01 08:04:26.697 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.697 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:04:26.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.699 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308===================
17-03-01 08:04:26.699 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308===================
17-03-01 08:04:26.700 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Aspirating port PortB, Waiting for image analysis===================
17-03-01 08:04:26.700 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Aspirating port PortB===================
17-03-01 08:04:26.700 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:04:26.700 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 1 - X = 68.63164 Y = 39.76308===================
17-03-01 08:04:26.722 -08 000000042 INF: Waited 22 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 0, buffer wait time 0
17-03-01 08:04:26.723 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:26.723 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308===================
17-03-01 08:04:26.723 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:26.723 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308===================
17-03-01 08:04:26.723 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:04:26.723 -08 000000042 INF: Transformed XStagePosition from 69.73964 mm to 69.6916842833161 mm.
17-03-01 08:04:26.735 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5696493549049 mm.
17-03-01 08:04:26.735 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3696493549049 mm.
17-03-01 08:04:26.735 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4603993549049 mm.
17-03-01 08:04:26.738 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.738 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:04:26.738 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:26.738 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -147.4 um, section = A_1
17-03-01 08:04:26.740 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:26.741 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:26.758 -08 000000067 INF: ===================MoveEmissionFilters===================
17-03-01 08:04:26.760 -08 000000140 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:26.762 -08 000000140 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:04:26.762 -08 000000140 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:04:26.763 -08 000000140 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:26.764 -08 000000097 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:26.765 -08 000000097 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:26.767 -08 000000117 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:04:26.767 -08 000000140 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:04:26.767 -08 000000117 INF: ======================================
17-03-01 08:04:26.769 -08 000000062 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:04:26.769 -08 000000062 INF: ======================================
17-03-01 08:04:26.770 -08 000000117 INF: ===================TDI Scan Setup===================
17-03-01 08:04:26.770 -08 000000097 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:26.771 -08 000000117 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:26.772 -08 000000117 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:26.772 -08 000000117 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:26.772 -08 000000117 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:04:26.773 -08 000000097 INF: ======================================
17-03-01 08:04:26.773 -08 000000061 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:26.773 -08 000000060 INF: ===================Move X,Y===================
17-03-01 08:04:26.775 -08 000000061 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:26.775 -08 000000060 INF: ===================Move X,Y, Parallel===================
17-03-01 08:04:26.777 -08 000000062 INF: ===================Camera Arm TDI===================
17-03-01 08:04:26.780 -08 000000062 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:26.782 -08 000000054 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:04:26.783 -08 000000062 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:26.783 -08 000000054 INF: ======================================
17-03-01 08:04:26.788 -08 000000054 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:26.788 -08 000000054 INF: Y Motor: Moving to 64.5696 mm @25.000 mm/sec, started at 14.9210 mm
17-03-01 08:04:26.788 -08 000000088 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:26.788 -08 000000054 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:26.788 -08 000000054 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:26.789 -08 000000088 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:26.790 -08 000000145 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:04:26.791 -08 000000134 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:04:26.791 -08 000000023 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:04:26.791 -08 000000134 INF: ======================================
17-03-01 08:04:26.792 -08 000000145 INF: ======================================
17-03-01 08:04:26.792 -08 000000023 INF: ======================================
17-03-01 08:04:26.792 -08 000000148 INF: ===================Move X Motor without settling===================
17-03-01 08:04:26.793 -08 000000130 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1105 Request: {"Cycle":52,"Lane":1,"Tile":1105,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF187","HCSMMF269","HCSMMF182"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.793 -08 000000148 INF: X Motor: Xmit PR VM\n
17-03-01 08:04:26.794 -08 000000088 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:26.794 -08 000000061 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:26.795 -08 000000088 INF: ======================================
17-03-01 08:04:26.797 -08 000000061 INF: ======================================
17-03-01 08:04:26.803 -08 000000071 INF: FPGA: Recv ZSEL 
17-03-01 08:04:26.814 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:26.821 -08 000000117 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:26.821 -08 000000117 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:04:26.833 -08 000000059 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:26.834 -08 000000059 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:26.837 -08 000000061 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:04:26.838 -08 000000061 INF: ======================================
17-03-01 08:04:26.841 -08 000000097 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:04:26.841 -08 000000097 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:04:26.842 -08 000000097 INF: ======================================
17-03-01 08:04:26.844 -08 000000059 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:26.845 -08 000000059 INF: ======================================
17-03-01 08:04:26.847 -08 000000067 INF: ======================================
17-03-01 08:04:26.865 -08 000000109 INF: FPGA: Recv TDIBB
17-03-01 08:04:26.866 -08 000000117 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:26.867 -08 000000148 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:04:26.867 -08 000000148 INF: X Motor: Xmit PR VI\n
17-03-01 08:04:26.870 -08 000000117 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:26.870 -08 000000117 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:26.872 -08 000000054 INF: Y Motor: Recv ok\r
17-03-01 08:04:26.872 -08 000000054 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:26.872 -08 000000054 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:26.873 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:26.874 -08 000000117 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:04:26.875 -08 000000117 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:04:26.875 -08 000000117 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:04:26.929 -08 000000146 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:26.929 -08 000000117 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:26.931 -08 000000054 INF: Y Motor: Recv ok\r
17-03-01 08:04:26.931 -08 000000054 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:26.931 -08 000000117 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:04:26.931 -08 000000117 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:26.932 -08 000000148 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:04:26.932 -08 000000148 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:04:26.932 -08 000000148 INF: X Motor: Moving to 69.6917 mm @15.000 mm/sec, started at 68.5898 mm
17-03-01 08:04:26.932 -08 000000148 INF: X Motor: Xmit MA 4379\n
17-03-01 08:04:26.933 -08 000000117 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:04:26.933 -08 000000117 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:04:26.933 -08 000000117 INF: Z Motor: Arming to move to -0.1074 mm
17-03-01 08:04:26.933 -08 000000117 INF: FPGA: Xmit ZYT 6436965 4\n
17-03-01 08:04:26.939 -08 000000105 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1103 Request: {"Cycle":52,"Lane":1,"Tile":1103,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF232","HCSMMF272","HCSMMF209","HCSMMF247"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.940 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1101 Request: {"Cycle":52,"Lane":1,"Tile":1101,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF231","HCSMMF271","HCSMMF223","HCSMMF227"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.941 -08 000000119 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1110 Request: {"Cycle":52,"Lane":1,"Tile":1110,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF287","HCSMMF224","HCSMMF260","HCSMMF181"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.942 -08 000000133 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1109 Request: {"Cycle":52,"Lane":1,"Tile":1109,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF243","HCSMMF238","HCSMMF251","HCSMMF229"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.942 -08 000000124 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1104 Request: {"Cycle":52,"Lane":1,"Tile":1104,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF188","HCSMMF278","HCSMMF215","HCSMMF277"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.943 -08 000000151 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1106 Request: {"Cycle":52,"Lane":1,"Tile":1106,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF281","HCSMMF266","HCSMMF189","HCSMMF245"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.944 -08 000000071 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1118 Request: {"Cycle":52,"Lane":1,"Tile":1118,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF284","HCSMMF207","HCSMMF221","HCSMMF192"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.944 -08 000000135 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1116 Request: {"Cycle":52,"Lane":1,"Tile":1116,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF176","HCSMMF246","HCSMMF216","HCSMMF234"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.945 -08 000000144 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1117 Request: {"Cycle":52,"Lane":1,"Tile":1117,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF261","HCSMMF255","HCSMMF183","HCSMMF177"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.945 -08 000000046 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1108 Request: {"Cycle":52,"Lane":1,"Tile":1108,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF193","HCSMMF214","HCSMMF212","HCSMMF208"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.946 -08 000000095 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1114 Request: {"Cycle":52,"Lane":1,"Tile":1114,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF242","HCSMMF203","HCSMMF198","HCSMMF180"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.947 -08 000000031 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1112 Request: {"Cycle":52,"Lane":1,"Tile":1112,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF262","HCSMMF248","HCSMMF186","HCSMMF179"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.948 -08 000000134 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1115 Request: {"Cycle":52,"Lane":1,"Tile":1115,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF265","HCSMMF194","HCSMMF195","HCSMMF263"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.948 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1102 Request: {"Cycle":52,"Lane":1,"Tile":1102,"Channels":["G","T","C","A"],"MemoryMappedFileNames":["HCSMMF237","HCSMMF273","HCSMMF282","HCSMMF236"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.949 -08 000000069 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1113 Request: {"Cycle":52,"Lane":1,"Tile":1113,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF220","HCSMMF211","HCSMMF205","HCSMMF230"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.950 -08 000000131 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1107 Request: {"Cycle":52,"Lane":1,"Tile":1107,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF270","HCSMMF178","HCSMMF217","HCSMMF267"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.950 -08 000000104 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1121 Request: {"Cycle":52,"Lane":1,"Tile":1121,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF268","HCSMMF240","HCSMMF197","HCSMMF219"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.951 -08 000000004 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1120 Request: {"Cycle":52,"Lane":1,"Tile":1120,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF196","HCSMMF225","HCSMMF201","HCSMMF259"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.951 -08 000000113 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1111 Request: {"Cycle":52,"Lane":1,"Tile":1111,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF233","HCSMMF252","HCSMMF285","HCSMMF258"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.952 -08 000000108 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1119 Request: {"Cycle":52,"Lane":1,"Tile":1119,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF239","HCSMMF204","HCSMMF190","HCSMMF235"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.953 -08 000000036 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1123 Request: {"Cycle":52,"Lane":1,"Tile":1123,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF256","HCSMMF286","HCSMMF276","HCSMMF213"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.953 -08 000000059 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1124 Request: {"Cycle":52,"Lane":1,"Tile":1124,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF253","HCSMMF206","HCSMMF250","HCSMMF280"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.954 -08 000000153 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1122 Request: {"Cycle":52,"Lane":1,"Tile":1122,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF222","HCSMMF283","HCSMMF241","HCSMMF249"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.955 -08 000000067 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1125 Request: {"Cycle":52,"Lane":1,"Tile":1125,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF254","HCSMMF257","HCSMMF228","HCSMMF184"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.956 -08 000000093 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1128 Request: {"Cycle":52,"Lane":1,"Tile":1128,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF279","HCSMMF210","HCSMMF244","HCSMMF185"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.957 -08 000000092 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1127 Request: {"Cycle":52,"Lane":1,"Tile":1127,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF218","HCSMMF275","HCSMMF202","HCSMMF191"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.958 -08 000000035 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1126 Request: {"Cycle":52,"Lane":1,"Tile":1126,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF226","HCSMMF274","HCSMMF200","HCSMMF199"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:26.967 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:26.974 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:04:26.991 -08 000000135 INF: FPGA: Recv ZYT 
17-03-01 08:04:26.991 -08 000000117 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492096 enc / 14.921 mm / ) = 6436965 enc / 64.370 mm
17-03-01 08:04:26.991 -08 000000117 INF: FPGA: Xmit ZARM 28161\n
17-03-01 08:04:26.994 -08 000000148 INF: X Motor: Recv MA 4379\r\n>
17-03-01 08:04:26.994 -08 000000054 INF: Y Motor: Recv v 0\r
17-03-01 08:04:26.994 -08 000000054 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:26.994 -08 000000148 INF: X Motor: WaitUntilStopped 60073
17-03-01 08:04:26.994 -08 000000054 INF: Y Motor: Set target position to 5956965 encoder counts
17-03-01 08:04:26.994 -08 000000054 INF: Y Motor: Xmit s r0xca 5956965\r
17-03-01 08:04:27.054 -08 000000108 INF: FPGA: Recv ZARM
17-03-01 08:04:27.054 -08 000000117 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 62.8289 ms
17-03-01 08:04:27.054 -08 000000117 INF: Z Motor: ArmAbsStepped took 120.5537 ms
17-03-01 08:04:27.054 -08 000000117 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:27.055 -08 000000054 INF: Y Motor: Recv ok\r
17-03-01 08:04:27.055 -08 000000054 INF: Y Motor: Start the move command
17-03-01 08:04:27.055 -08 000000054 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:27.056 -08 000000117 INF: ===================TDI Scan Setup===================
17-03-01 08:04:27.057 -08 000000117 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:04:27.058 -08 000000117 INF: ===================TDI Scan Setup===================
17-03-01 08:04:27.059 -08 000000117 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:04:27.059 -08 000000117 INF: ===================TDI Scan Setup===================
17-03-01 08:04:27.061 -08 000000117 INF: ======================================
17-03-01 08:04:27.117 -08 000000054 INF: Y Motor: Recv ok\r
17-03-01 08:04:27.117 -08 000000054 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:04:27.117 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:27.118 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:27.118 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:04:27.124 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:27.156 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:27.162 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:04:27.178 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:27.241 -08 000000054 INF: Y Motor: Unshifted Position: 1074020
17-03-01 08:04:27.270 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:27.276 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:04:27.291 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:27.381 -08 000000062 INF: Camera #0 AttachBuffer (imageDataPtr = 60599242800 imgPtr = 60599242800 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:27.381 -08 000000062 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:27.382 -08 000000062 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:27.382 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:27.388 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:04:27.397 -08 000000062 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:27.399 -08 000000062 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:27.415 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:27.428 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:27.489 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:27.496 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:27.552 -08 000000054 INF: Y Motor: Unshifted Position: 1776255
17-03-01 08:04:27.602 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:27.617 -08 000000148 INF: X Motor: Xmit PR ER\n
17-03-01 08:04:27.679 -08 000000148 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:04:27.679 -08 000000148 INF: X Motor: Moved to 69.6909 after 684 ms
17-03-01 08:04:27.679 -08 000000148 INF: ======================================
17-03-01 08:04:27.729 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:27.739 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:27.782 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:04:27.801 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:27.801 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:27.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:27.802 -08 000000018 INF: WaitCommand(5000) start
17-03-01 08:04:27.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Delay 5 of 5 seconds left===================
17-03-01 08:04:27.864 -08 000000054 INF: Y Motor: Unshifted Position: 2557110
17-03-01 08:04:27.914 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.008 -08 000000062 INF: Camera #2 AttachBuffer (imageDataPtr = 62411182128 imgPtr = 63317151792 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:28.008 -08 000000062 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:28.008 -08 000000062 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:28.024 -08 000000062 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:28.026 -08 000000062 INF: ===================Camera Arm TDI===================
17-03-01 08:04:28.028 -08 000000062 INF: ======================================
17-03-01 08:04:28.030 -08 000000140 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:28.031 -08 000000140 INF: ======================================
17-03-01 08:04:28.040 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.176 -08 000000054 INF: Y Motor: Unshifted Position: 3337896
17-03-01 08:04:28.226 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.351 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.488 -08 000000054 INF: Y Motor: Unshifted Position: 4117971
17-03-01 08:04:28.538 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.666 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.802 -08 000000054 INF: Y Motor: Unshifted Position: 4903736
17-03-01 08:04:28.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:28.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Delay 4 of 5 seconds left===================
17-03-01 08:04:28.852 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:28.976 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:29.112 -08 000000054 INF: Y Motor: Unshifted Position: 5677621
17-03-01 08:04:29.162 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:29.288 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:29.424 -08 000000054 INF: Y Motor: Unshifted Position: 5956967
17-03-01 08:04:29.424 -08 000000054 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:29.424 -08 000000054 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:29.490 -08 000000054 INF: Y Motor: Recv v 0\r
17-03-01 08:04:29.490 -08 000000054 INF: Y Motor: Moved to 64.5697 after 2373 ms
17-03-01 08:04:29.490 -08 000000054 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:29.549 -08 000000054 INF: Y Motor: Recv v 4096\r
17-03-01 08:04:29.549 -08 000000054 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:29.549 -08 000000054 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:29.614 -08 000000054 INF: Y Motor: Recv v 0\r
17-03-01 08:04:29.614 -08 000000054 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:29.614 -08 000000054 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:29.676 -08 000000054 INF: Y Motor: Recv v 402653184\r
17-03-01 08:04:29.676 -08 000000054 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:04:29.676 -08 000000054 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:29.676 -08 000000054 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:29.740 -08 000000054 INF: Y Motor: Recv v 0\r
17-03-01 08:04:29.740 -08 000000054 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:29.740 -08 000000054 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:29.740 -08 000000054 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:29.800 -08 000000054 INF: Y Motor: Recv ok\r
17-03-01 08:04:29.800 -08 000000054 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:29.800 -08 000000054 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:29.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:29.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Delay 3 of 5 seconds left===================
17-03-01 08:04:29.862 -08 000000054 INF: Y Motor: Recv ok\r
17-03-01 08:04:29.862 -08 000000054 INF: ======================================
17-03-01 08:04:29.864 -08 000000060 INF: ===================Move X,Y===================
17-03-01 08:04:29.865 -08 000000060 INF: ======================================
17-03-01 08:04:29.866 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:29.866 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:29.867 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:04:29.867 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:04:29.924 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:04:29.924 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:04:29.984 -08 000000131 INF: FPGA: Recv ZFREQCL
17-03-01 08:04:29.984 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:04:29.985 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:29.985 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:30.046 -08 000000080 INF: FPGA: Recv TDIYERD 6456967
17-03-01 08:04:30.046 -08 000000042 INF: Before scan, Y encoder from FPGA = 6456967 counts (64.570 mm)
17-03-01 08:04:30.046 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:30.047 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:30.048 -08 000000071 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:30.048 -08 000000065 INF: ===================Set YMotor gains for scans===================
17-03-01 08:04:30.049 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:30.049 -08 000000065 INF: ======================================
17-03-01 08:04:30.049 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:04:30.049 -08 000000071 INF: FPGA: Xmit TDIYPOS 6346040\n
17-03-01 08:04:30.112 -08 000000097 INF: FPGA: Recv TDIYPOS
17-03-01 08:04:30.112 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:30.114 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:04:30.114 -08 000000071 INF: FPGA: Xmit TDIYARM3 139264 6436965 1 1\n
17-03-01 08:04:30.173 -08 000000040 INF: FPGA: Recv TDIYARM3
17-03-01 08:04:30.173 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:30.174 -08 000000071 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:30.175 -08 000000071 INF: ======================================
17-03-01 08:04:30.176 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:30.177 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:30.177 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:30.178 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:30.178 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:30.179 -08 000000020 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:04:30.179 -08 000000104 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:04:30.179 -08 000000020 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:04:30.179 -08 000000020 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:04:30.179 -08 000000020 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:04:30.179 -08 000000104 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:04:30.179 -08 000000020 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:04:30.179 -08 000000104 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:04:30.179 -08 000000104 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:04:30.183 -08 000000104 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:04:30.548 -08 000000097 INF: FPGA: Recv EX2MV
17-03-01 08:04:30.548 -08 000000097 INF: FPGA: Recv EX1MV
17-03-01 08:04:30.548 -08 000000020 INF: Excitation Filter 2: Moved -107 steps in 369.0649 ms
17-03-01 08:04:30.549 -08 000000104 INF: Excitation Filter 1: Moved -107 steps in 368.9672 ms
17-03-01 08:04:30.549 -08 000000020 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 369.209 ms
17-03-01 08:04:30.549 -08 000000020 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 369.4242 ms
17-03-01 08:04:30.549 -08 000000104 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 369.2306 ms
17-03-01 08:04:30.549 -08 000000104 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 369.4679 ms
17-03-01 08:04:30.549 -08 000000020 INF: ======================================
17-03-01 08:04:30.549 -08 000000104 INF: ======================================
17-03-01 08:04:30.550 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:30.551 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:30.552 -08 000000031 INF: ===================Camera TDI===================
17-03-01 08:04:30.552 -08 000000148 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:30.552 -08 000000067 INF: ===================FPGA Z Wait===================
17-03-01 08:04:30.553 -08 000000119 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:30.553 -08 000000119 INF: Y Motor: Moving to 14.9213 mm @6.500 mm/sec, started at 64.5697 mm
17-03-01 08:04:30.553 -08 000000067 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:04:30.553 -08 000000119 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:30.553 -08 000000119 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:30.553 -08 000000031 INF: ===================Camera TDI, Parallel===================
17-03-01 08:04:30.553 -08 000000148 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:04:30.554 -08 000000148 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:04:30.554 -08 000000153 INF: ===================Camera TDI===================
17-03-01 08:04:30.554 -08 000000133 INF: ===================Camera TDI===================
17-03-01 08:04:30.556 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:30.556 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:30.557 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:30.557 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:30.612 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:30.612 -08 000000119 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:30.612 -08 000000119 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:30.674 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:30.674 -08 000000119 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:30.707 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:30.707 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:30.707 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:30.707 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:30.737 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:30.737 -08 000000119 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:30.737 -08 000000119 INF: Y Motor: Set target position to 992131 encoder counts
17-03-01 08:04:30.737 -08 000000119 INF: Y Motor: Xmit s r0xca 992131\r
17-03-01 08:04:30.799 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:30.799 -08 000000119 INF: Y Motor: Start the move command
17-03-01 08:04:30.799 -08 000000119 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:30.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:30.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Delay 2 of 5 seconds left===================
17-03-01 08:04:30.857 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:30.857 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:30.857 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:30.857 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:30.860 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:30.860 -08 000000119 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:04:30.860 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:30.920 -08 000000135 INF: FPGA: Recv ZWAIT 
17-03-01 08:04:30.920 -08 000000067 INF: ======================================
17-03-01 08:04:30.984 -08 000000119 INF: Y Motor: Unshifted Position: 5895548
17-03-01 08:04:31.007 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:04:31.007 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:04:31.007 -08 000000133 INF: ===================Camera #0 Frame #5===================
17-03-01 08:04:31.012 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:04:31.012 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:04:31.012 -08 000000153 INF: ===================Camera #2 Frame #5===================
17-03-01 08:04:31.034 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:31.172 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:04:31.172 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:04:31.172 -08 000000133 INF: ===================Camera #0 Frame #11===================
17-03-01 08:04:31.178 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:04:31.178 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:04:31.178 -08 000000153 INF: ===================Camera #2 Frame #11===================
17-03-01 08:04:31.191 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:31.314 -08 000000119 INF: Y Motor: Unshifted Position: 5681046
17-03-01 08:04:31.346 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:04:31.346 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:04:31.346 -08 000000133 INF: ===================Camera #0 Frame #17===================
17-03-01 08:04:31.347 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:04:31.347 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:04:31.347 -08 000000153 INF: ===================Camera #2 Frame #17===================
17-03-01 08:04:31.364 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:31.489 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:31.516 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 22, frameCount = 23.
17-03-01 08:04:31.516 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 23
17-03-01 08:04:31.516 -08 000000153 INF: ===================Camera #2 Frame #23===================
17-03-01 08:04:31.522 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:04:31.522 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:04:31.522 -08 000000133 INF: ===================Camera #0 Frame #24===================
17-03-01 08:04:31.626 -08 000000119 INF: Y Motor: Unshifted Position: 5479549
17-03-01 08:04:31.676 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:31.694 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:04:31.694 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:04:31.694 -08 000000153 INF: ===================Camera #2 Frame #30===================
17-03-01 08:04:31.703 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:04:31.703 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:04:31.703 -08 000000133 INF: ===================Camera #0 Frame #30===================
17-03-01 08:04:31.800 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:31.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:31.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Delay 1 of 5 seconds left===================
17-03-01 08:04:31.876 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:04:31.876 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:04:31.876 -08 000000153 INF: ===================Camera #2 Frame #37===================
17-03-01 08:04:31.879 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:04:31.879 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:04:31.879 -08 000000133 INF: ===================Camera #0 Frame #37===================
17-03-01 08:04:31.937 -08 000000119 INF: Y Motor: Unshifted Position: 5274576
17-03-01 08:04:31.987 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.055 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:04:32.055 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:04:32.055 -08 000000153 INF: ===================Camera #2 Frame #43===================
17-03-01 08:04:32.059 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:04:32.059 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:04:32.059 -08 000000133 INF: ===================Camera #0 Frame #43===================
17-03-01 08:04:32.111 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.236 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:04:32.236 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:04:32.236 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:04:32.236 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:04:32.236 -08 000000153 INF: ===================Camera #2 Frame #50===================
17-03-01 08:04:32.237 -08 000000133 INF: ===================Camera #0 Frame #50===================
17-03-01 08:04:32.248 -08 000000119 INF: Y Motor: Unshifted Position: 5073080
17-03-01 08:04:32.298 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.418 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 56, frameCount = 57.
17-03-01 08:04:32.418 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 57
17-03-01 08:04:32.418 -08 000000153 INF: ===================Camera #2 Frame #57===================
17-03-01 08:04:32.419 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 56, frameCount = 57.
17-03-01 08:04:32.419 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 57
17-03-01 08:04:32.419 -08 000000133 INF: ===================Camera #0 Frame #57===================
17-03-01 08:04:32.425 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.560 -08 000000119 INF: Y Motor: Unshifted Position: 4870068
17-03-01 08:04:32.591 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 62, frameCount = 63.
17-03-01 08:04:32.591 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 63
17-03-01 08:04:32.591 -08 000000133 INF: ===================Camera #0 Frame #63===================
17-03-01 08:04:32.596 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 62, frameCount = 63.
17-03-01 08:04:32.596 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 63
17-03-01 08:04:32.596 -08 000000153 INF: ===================Camera #2 Frame #63===================
17-03-01 08:04:32.610 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.737 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.760 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 68, frameCount = 69.
17-03-01 08:04:32.760 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 69
17-03-01 08:04:32.760 -08 000000133 INF: ===================Camera #0 Frame #69===================
17-03-01 08:04:32.765 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 68, frameCount = 69.
17-03-01 08:04:32.765 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 69
17-03-01 08:04:32.765 -08 000000153 INF: ===================Camera #2 Frame #69===================
17-03-01 08:04:32.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:32.802 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Delay 0 of 5 seconds left===================
17-03-01 08:04:32.803 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:32.803 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:32.803 -08 000000018 INF: WaitCommand(5000) end
17-03-01 08:04:32.803 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:32.874 -08 000000119 INF: Y Motor: Unshifted Position: 4667050
17-03-01 08:04:32.901 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:04:32.924 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:32.929 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:04:32.929 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:04:32.929 -08 000000133 INF: ===================Camera #0 Frame #75===================
17-03-01 08:04:32.934 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 75, frameCount = 76.
17-03-01 08:04:32.934 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 76
17-03-01 08:04:32.934 -08 000000153 INF: ===================Camera #2 Frame #76===================
17-03-01 08:04:32.935 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`18240 (0x03)\r\n(0xFF)
17-03-01 08:04:32.935 -08 000000018 INF: Current Position of Pump is: 18240
17-03-01 08:04:33.035 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:04:33.048 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.097 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 81, frameCount = 82.
17-03-01 08:04:33.097 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 82
17-03-01 08:04:33.097 -08 000000133 INF: ===================Camera #0 Frame #82===================
17-03-01 08:04:33.107 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 81, frameCount = 82.
17-03-01 08:04:33.107 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 82
17-03-01 08:04:33.107 -08 000000153 INF: ===================Camera #2 Frame #82===================
17-03-01 08:04:33.123 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`18240 (0x03)\r\n(0xFF)
17-03-01 08:04:33.123 -08 000000018 INF: Current Position of Pump is: 18240
17-03-01 08:04:33.123 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6), Dispensing port PortC===================
17-03-01 08:04:33.187 -08 000000119 INF: Y Motor: Unshifted Position: 4463583
17-03-01 08:04:33.223 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V8000OD18240R\r
17-03-01 08:04:33.237 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.269 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 87, frameCount = 88.
17-03-01 08:04:33.269 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 88
17-03-01 08:04:33.269 -08 000000133 INF: ===================Camera #0 Frame #88===================
17-03-01 08:04:33.277 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 87, frameCount = 88.
17-03-01 08:04:33.277 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 88
17-03-01 08:04:33.277 -08 000000153 INF: ===================Camera #2 Frame #88===================
17-03-01 08:04:33.310 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:33.359 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.410 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:33.433 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:33.438 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 93, frameCount = 94.
17-03-01 08:04:33.438 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 94
17-03-01 08:04:33.438 -08 000000133 INF: ===================Camera #0 Frame #94===================
17-03-01 08:04:33.446 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 93, frameCount = 94.
17-03-01 08:04:33.446 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 94
17-03-01 08:04:33.446 -08 000000153 INF: ===================Camera #2 Frame #94===================
17-03-01 08:04:33.497 -08 000000119 INF: Y Motor: Unshifted Position: 4262517
17-03-01 08:04:33.547 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.607 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:04:33.607 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:04:33.607 -08 000000133 INF: ===================Camera #0 Frame #100===================
17-03-01 08:04:33.615 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 100, frameCount = 101.
17-03-01 08:04:33.615 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 101
17-03-01 08:04:33.615 -08 000000153 INF: ===================Camera #2 Frame #101===================
17-03-01 08:04:33.671 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.683 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:33.748 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:33.775 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 106, frameCount = 107.
17-03-01 08:04:33.775 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 107
17-03-01 08:04:33.775 -08 000000133 INF: ===================Camera #0 Frame #107===================
17-03-01 08:04:33.787 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 106, frameCount = 107.
17-03-01 08:04:33.787 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 107
17-03-01 08:04:33.787 -08 000000153 INF: ===================Camera #2 Frame #107===================
17-03-01 08:04:33.808 -08 000000119 INF: Y Motor: Unshifted Position: 4057768
17-03-01 08:04:33.858 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.946 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 112, frameCount = 113.
17-03-01 08:04:33.946 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 113
17-03-01 08:04:33.946 -08 000000133 INF: ===================Camera #0 Frame #113===================
17-03-01 08:04:33.956 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 112, frameCount = 113.
17-03-01 08:04:33.956 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 113
17-03-01 08:04:33.956 -08 000000153 INF: ===================Camera #2 Frame #113===================
17-03-01 08:04:33.985 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:33.998 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:34.057 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:34.114 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 118, frameCount = 119.
17-03-01 08:04:34.114 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 119
17-03-01 08:04:34.114 -08 000000133 INF: ===================Camera #0 Frame #119===================
17-03-01 08:04:34.122 -08 000000119 INF: Y Motor: Unshifted Position: 3856267
17-03-01 08:04:34.125 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 118, frameCount = 119.
17-03-01 08:04:34.125 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 119
17-03-01 08:04:34.125 -08 000000153 INF: ===================Camera #2 Frame #119===================
17-03-01 08:04:34.172 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:34.283 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 124, frameCount = 125.
17-03-01 08:04:34.283 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 125
17-03-01 08:04:34.283 -08 000000133 INF: ===================Camera #0 Frame #125===================
17-03-01 08:04:34.294 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 125, frameCount = 126.
17-03-01 08:04:34.294 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 126
17-03-01 08:04:34.294 -08 000000153 INF: ===================Camera #2 Frame #126===================
17-03-01 08:04:34.296 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:34.307 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:34.371 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:34.433 -08 000000119 INF: Y Motor: Unshifted Position: 3651945
17-03-01 08:04:34.451 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 130, frameCount = 131.
17-03-01 08:04:34.451 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 131
17-03-01 08:04:34.451 -08 000000133 INF: ===================Camera #0 Frame #131===================
17-03-01 08:04:34.467 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 131, frameCount = 132.
17-03-01 08:04:34.467 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 132
17-03-01 08:04:34.467 -08 000000153 INF: ===================Camera #2 Frame #132===================
17-03-01 08:04:34.483 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:34.609 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:34.619 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 137, frameCount = 138.
17-03-01 08:04:34.619 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 138
17-03-01 08:04:34.619 -08 000000133 INF: ===================Camera #0 Frame #138===================
17-03-01 08:04:34.621 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:34.636 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 137, frameCount = 138.
17-03-01 08:04:34.636 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 138
17-03-01 08:04:34.636 -08 000000153 INF: ===================Camera #2 Frame #138===================
17-03-01 08:04:34.684 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:34.745 -08 000000119 INF: Y Motor: Unshifted Position: 3449147
17-03-01 08:04:34.790 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 143, frameCount = 144.
17-03-01 08:04:34.790 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 144
17-03-01 08:04:34.790 -08 000000133 INF: ===================Camera #0 Frame #144===================
17-03-01 08:04:34.795 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:34.805 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 143, frameCount = 144.
17-03-01 08:04:34.805 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 144
17-03-01 08:04:34.805 -08 000000153 INF: ===================Camera #2 Frame #144===================
17-03-01 08:04:34.919 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:34.934 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:34.959 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 149, frameCount = 150.
17-03-01 08:04:34.959 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 150
17-03-01 08:04:34.959 -08 000000133 INF: ===================Camera #0 Frame #150===================
17-03-01 08:04:34.974 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 150, frameCount = 151.
17-03-01 08:04:34.974 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 151
17-03-01 08:04:34.974 -08 000000153 INF: ===================Camera #2 Frame #151===================
17-03-01 08:04:34.995 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:35.056 -08 000000119 INF: Y Motor: Unshifted Position: 3245489
17-03-01 08:04:35.106 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:35.127 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 155, frameCount = 156.
17-03-01 08:04:35.127 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 156
17-03-01 08:04:35.127 -08 000000133 INF: ===================Camera #0 Frame #156===================
17-03-01 08:04:35.146 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 156, frameCount = 157.
17-03-01 08:04:35.146 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 157
17-03-01 08:04:35.146 -08 000000153 INF: ===================Camera #2 Frame #157===================
17-03-01 08:04:35.230 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:35.245 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:35.295 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 162, frameCount = 163.
17-03-01 08:04:35.295 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 163
17-03-01 08:04:35.295 -08 000000133 INF: ===================Camera #0 Frame #163===================
17-03-01 08:04:35.305 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:35.315 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 162, frameCount = 163.
17-03-01 08:04:35.315 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 163
17-03-01 08:04:35.315 -08 000000153 INF: ===================Camera #2 Frame #163===================
17-03-01 08:04:35.370 -08 000000119 INF: Y Motor: Unshifted Position: 3043774
17-03-01 08:04:35.420 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:35.467 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:04:35.467 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:04:35.467 -08 000000133 INF: ===================Camera #0 Frame #169===================
17-03-01 08:04:35.485 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 169, frameCount = 170.
17-03-01 08:04:35.485 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 170
17-03-01 08:04:35.485 -08 000000153 INF: ===================Camera #2 Frame #170===================
17-03-01 08:04:35.542 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:35.555 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:35.617 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:35.635 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 174, frameCount = 175.
17-03-01 08:04:35.635 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 175
17-03-01 08:04:35.635 -08 000000133 INF: ===================Camera #0 Frame #175===================
17-03-01 08:04:35.657 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 175, frameCount = 176.
17-03-01 08:04:35.657 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 176
17-03-01 08:04:35.657 -08 000000153 INF: ===================Camera #2 Frame #176===================
17-03-01 08:04:35.682 -08 000000119 INF: Y Motor: Unshifted Position: 2841622
17-03-01 08:04:35.732 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:35.803 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 180, frameCount = 181.
17-03-01 08:04:35.803 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 181
17-03-01 08:04:35.803 -08 000000133 INF: ===================Camera #0 Frame #181===================
17-03-01 08:04:35.826 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 181, frameCount = 182.
17-03-01 08:04:35.826 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 182
17-03-01 08:04:35.826 -08 000000153 INF: ===================Camera #2 Frame #182===================
17-03-01 08:04:35.856 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:35.867 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:35.928 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:35.928 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HB2 (6)===================
17-03-01 08:04:35.928 -08 000000018 INF: KloehnPump A (KLOEHNA): Waiting 1000 ms before setting solenoid valve back to 'aspirate' position after PumpSolution
17-03-01 08:04:35.971 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 186, frameCount = 187.
17-03-01 08:04:35.971 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 187
17-03-01 08:04:35.971 -08 000000133 INF: ===================Camera #0 Frame #187===================
17-03-01 08:04:35.993 -08 000000119 INF: Y Motor: Unshifted Position: 2639478
17-03-01 08:04:35.995 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:04:35.995 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:04:35.995 -08 000000153 INF: ===================Camera #2 Frame #188===================
17-03-01 08:04:36.043 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.141 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 193, frameCount = 194.
17-03-01 08:04:36.141 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 194
17-03-01 08:04:36.141 -08 000000133 INF: ===================Camera #0 Frame #194===================
17-03-01 08:04:36.164 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 194, frameCount = 195.
17-03-01 08:04:36.164 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 195
17-03-01 08:04:36.164 -08 000000153 INF: ===================Camera #2 Frame #195===================
17-03-01 08:04:36.167 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.304 -08 000000119 INF: Y Motor: Unshifted Position: 2435168
17-03-01 08:04:36.314 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 199, frameCount = 200.
17-03-01 08:04:36.314 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 200
17-03-01 08:04:36.314 -08 000000133 INF: ===================Camera #0 Frame #200===================
17-03-01 08:04:36.338 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 200, frameCount = 201.
17-03-01 08:04:36.338 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 201
17-03-01 08:04:36.338 -08 000000153 INF: ===================Camera #2 Frame #201===================
17-03-01 08:04:36.354 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.478 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.482 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 205, frameCount = 206.
17-03-01 08:04:36.482 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 206
17-03-01 08:04:36.482 -08 000000133 INF: ===================Camera #0 Frame #206===================
17-03-01 08:04:36.509 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 206, frameCount = 207.
17-03-01 08:04:36.509 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 207
17-03-01 08:04:36.509 -08 000000153 INF: ===================Camera #2 Frame #207===================
17-03-01 08:04:36.616 -08 000000119 INF: Y Motor: Unshifted Position: 2231500
17-03-01 08:04:36.652 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 211, frameCount = 212.
17-03-01 08:04:36.652 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 212
17-03-01 08:04:36.652 -08 000000133 INF: ===================Camera #0 Frame #212===================
17-03-01 08:04:36.666 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.680 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 213, frameCount = 214.
17-03-01 08:04:36.680 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 214
17-03-01 08:04:36.680 -08 000000153 INF: ===================Camera #2 Frame #214===================
17-03-01 08:04:36.790 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.821 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 218, frameCount = 219.
17-03-01 08:04:36.821 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 219
17-03-01 08:04:36.821 -08 000000133 INF: ===================Camera #0 Frame #219===================
17-03-01 08:04:36.854 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 219, frameCount = 220.
17-03-01 08:04:36.854 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 220
17-03-01 08:04:36.854 -08 000000153 INF: ===================Camera #2 Frame #220===================
17-03-01 08:04:36.930 -08 000000119 INF: Y Motor: Unshifted Position: 2028697
17-03-01 08:04:36.980 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:36.994 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 224, frameCount = 225.
17-03-01 08:04:36.994 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 225
17-03-01 08:04:36.994 -08 000000133 INF: ===================Camera #0 Frame #225===================
17-03-01 08:04:37.025 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 225, frameCount = 226.
17-03-01 08:04:37.025 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 226
17-03-01 08:04:37.025 -08 000000153 INF: ===================Camera #2 Frame #226===================
17-03-01 08:04:37.028 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1IR\r
17-03-01 08:04:37.104 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:37.114 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:37.164 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 230, frameCount = 231.
17-03-01 08:04:37.164 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 231
17-03-01 08:04:37.164 -08 000000133 INF: ===================Camera #0 Frame #231===================
17-03-01 08:04:37.196 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 232, frameCount = 233.
17-03-01 08:04:37.196 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 233
17-03-01 08:04:37.196 -08 000000153 INF: ===================Camera #2 Frame #233===================
17-03-01 08:04:37.214 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:37.240 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:37.241 -08 000000119 INF: Y Motor: Unshifted Position: 1827626
17-03-01 08:04:37.291 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:37.334 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 237, frameCount = 238.
17-03-01 08:04:37.334 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 238
17-03-01 08:04:37.334 -08 000000133 INF: ===================Camera #0 Frame #238===================
17-03-01 08:04:37.368 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 238, frameCount = 239.
17-03-01 08:04:37.368 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 239
17-03-01 08:04:37.368 -08 000000153 INF: ===================Camera #2 Frame #239===================
17-03-01 08:04:37.415 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:37.490 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:37.506 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 243, frameCount = 244.
17-03-01 08:04:37.506 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 244
17-03-01 08:04:37.506 -08 000000133 INF: ===================Camera #0 Frame #244===================
17-03-01 08:04:37.539 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 244, frameCount = 245.
17-03-01 08:04:37.539 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 245
17-03-01 08:04:37.539 -08 000000153 INF: ===================Camera #2 Frame #245===================
17-03-01 08:04:37.552 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:37.552 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:37.552 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Closing shutoff valve===================
17-03-01 08:04:37.553 -08 000000119 INF: Y Motor: Unshifted Position: 1624833
17-03-01 08:04:37.603 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:37.676 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 249, frameCount = 250.
17-03-01 08:04:37.676 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 250
17-03-01 08:04:37.676 -08 000000133 INF: ===================Camera #0 Frame #250===================
17-03-01 08:04:37.708 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 250, frameCount = 251.
17-03-01 08:04:37.708 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 251
17-03-01 08:04:37.708 -08 000000153 INF: ===================Camera #2 Frame #251===================
17-03-01 08:04:37.727 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:37.846 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 255, frameCount = 256.
17-03-01 08:04:37.846 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 256
17-03-01 08:04:37.846 -08 000000133 INF: ===================Camera #0 Frame #256===================
17-03-01 08:04:37.864 -08 000000119 INF: Y Motor: Unshifted Position: 1420504
17-03-01 08:04:37.878 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:37.878 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:37.879 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:37.879 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 257, frameCount = 258.
17-03-01 08:04:37.879 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 258
17-03-01 08:04:37.879 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°===================
17-03-01 08:04:37.879 -08 000000153 INF: ===================Camera #2 Frame #258===================
17-03-01 08:04:37.879 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°===================
17-03-01 08:04:37.879 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°, FC temperature to 55°===================
17-03-01 08:04:37.914 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:38.016 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 262, frameCount = 263.
17-03-01 08:04:38.016 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 263
17-03-01 08:04:38.016 -08 000000133 INF: ===================Camera #0 Frame #263===================
17-03-01 08:04:38.038 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:38.052 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 263, frameCount = 264.
17-03-01 08:04:38.052 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 264
17-03-01 08:04:38.052 -08 000000153 INF: ===================Camera #2 Frame #264===================
17-03-01 08:04:38.178 -08 000000119 INF: Y Motor: Unshifted Position: 1218133
17-03-01 08:04:38.189 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 268, frameCount = 269.
17-03-01 08:04:38.189 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 269
17-03-01 08:04:38.189 -08 000000133 INF: ===================Camera #0 Frame #269===================
17-03-01 08:04:38.223 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:04:38.223 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 270
17-03-01 08:04:38.223 -08 000000153 INF: ===================Camera #2 Frame #270===================
17-03-01 08:04:38.228 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:38.252 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°===================
17-03-01 08:04:38.252 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°===================
17-03-01 08:04:38.253 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°===================
17-03-01 08:04:38.253 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Flowcell Temp 55°===================
17-03-01 08:04:38.254 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:38.254 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:38.255 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:38.255 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:38.300 -08 000000080 INF: FPGA: Recv TDIYWAIT
17-03-01 08:04:38.300 -08 000000148 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:38.301 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:38.301 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Selecting Reagent HCM (7)===================
17-03-01 08:04:38.301 -08 000000018 INF: Valve A1: Go to position 7
17-03-01 08:04:38.301 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:04:38.302 -08 000000148 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:04:38.303 -08 000000145 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:04:38.303 -08 000000140 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:04:38.303 -08 000000145 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:04:38.303 -08 000000145 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:04:38.303 -08 000000145 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:04:38.303 -08 000000140 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:04:38.303 -08 000000145 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:04:38.303 -08 000000140 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:04:38.303 -08 000000140 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:04:38.306 -08 000000140 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:04:38.352 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:38.359 -08 000000133 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:04:38.359 -08 000000133 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:04:38.359 -08 000000133 INF: ===================Camera #0 Frame #272===================
17-03-01 08:04:38.362 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 6\r
17-03-01 08:04:38.362 -08 000000018 INF: Valve A1: 25.520 seconds since last move, > 10.000 seconds required between moves
17-03-01 08:04:38.362 -08 000000018 INF: Valve A1: Taking shortest path 'CW' from 6 to 7
17-03-01 08:04:38.362 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CW7\r
17-03-01 08:04:38.362 -08 000000018 INF: SerialPort A1 (VICIA1): Recv  (discarded)
17-03-01 08:04:38.362 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:04:38.369 -08 000000133 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:04:38.370 -08 000000133 INF: ===================CameraTDI Cleanup===================
17-03-01 08:04:38.489 -08 000000119 INF: Y Motor: Unshifted Position: 1015983
17-03-01 08:04:38.498 -08 000000133 INF: Camera #0 ReleaseBuffer
17-03-01 08:04:38.498 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:04:38.498 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:04:38.498 -08 000000153 INF: ===================Camera #2 Frame #272===================
17-03-01 08:04:38.498 -08 000000133 INF: ===================Camera TDI===================
17-03-01 08:04:38.504 -08 000000153 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:04:38.505 -08 000000153 INF: ===================CameraTDI Cleanup===================
17-03-01 08:04:38.527 -08 000000133 INF: ======================================
17-03-01 08:04:38.539 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:38.613 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 7\r
17-03-01 08:04:38.613 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:38.613 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Opening shutoff valve===================
17-03-01 08:04:38.671 -08 000000153 INF: Camera #2 ReleaseBuffer
17-03-01 08:04:38.671 -08 000000153 INF: ===================Camera TDI===================
17-03-01 08:04:38.673 -08 000000151 INF: FPGA: Recv EX2MV
17-03-01 08:04:38.673 -08 000000151 INF: FPGA: Recv EX1MV
17-03-01 08:04:38.673 -08 000000140 INF: Excitation Filter 1: Moved 107 steps in 369.5754 ms
17-03-01 08:04:38.673 -08 000000145 INF: Excitation Filter 2: Moved 107 steps in 369.7656 ms
17-03-01 08:04:38.673 -08 000000140 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 369.737 ms
17-03-01 08:04:38.673 -08 000000140 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 369.8438 ms
17-03-01 08:04:38.673 -08 000000145 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 369.8739 ms
17-03-01 08:04:38.673 -08 000000145 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 370.0819 ms
17-03-01 08:04:38.673 -08 000000140 INF: ======================================
17-03-01 08:04:38.673 -08 000000145 INF: ======================================
17-03-01 08:04:38.675 -08 000000148 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:38.676 -08 000000119 INF: Y Motor: Unshifted Position: 992131
17-03-01 08:04:38.676 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:38.676 -08 000000119 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:38.676 -08 000000148 INF: ======================================
17-03-01 08:04:38.703 -08 000000153 INF: ======================================
17-03-01 08:04:38.704 -08 000000031 INF: ===================Camera TDI===================
17-03-01 08:04:38.705 -08 000000031 INF: ======================================
17-03-01 08:04:38.737 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:38.737 -08 000000119 INF: Y Motor: Moved to 14.9213 after 7877 ms
17-03-01 08:04:38.737 -08 000000119 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:38.801 -08 000000119 INF: Y Motor: Recv v 4097\r
17-03-01 08:04:38.801 -08 000000119 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:38.801 -08 000000119 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:38.863 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:38.863 -08 000000119 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:38.863 -08 000000119 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:38.925 -08 000000119 INF: Y Motor: Recv v 134217728\r
17-03-01 08:04:38.925 -08 000000119 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:04:38.925 -08 000000119 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:38.925 -08 000000119 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:38.989 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:38.989 -08 000000119 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:38.989 -08 000000119 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:38.989 -08 000000119 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:39.051 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:39.051 -08 000000119 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:39.051 -08 000000119 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:39.112 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:39.112 -08 000000119 INF: ======================================
17-03-01 08:04:39.113 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:39.114 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:39.115 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.115 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:04:39.172 -08 000000145 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:04:39.172 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:39.234 -08 000000054 INF: FPGA: Recv TDIYERD 1492132
17-03-01 08:04:39.234 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:04:39.249 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:04:39.249 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:39.249 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:39.298 -08 000000092 INF: FPGA: Recv ZADCR 31545
17-03-01 08:04:39.298 -08 000000042 INF: At scan end Y pos = 14.921 and Z pos = -0.121. Y moved -48.539 mm
17-03-01 08:04:39.298 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:04:39.299 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:39.308 -08 000000018 INF: KloehnPump A (KLOEHNA): Pumping from 7, aspirate port PortB, aspiration rate 250, dispense rate 2500, volume 62, calling command "Pumping to Flowcell #1 pump index #0", State=Running, Depth=2, Children=0, Thread="Run", Parent="Deblock", Type=SameThreadBlocking, solution delay 5000
17-03-01 08:04:39.360 -08 000000094 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:04:39.360 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:04:39.360 -08 000000042 INF: TDIScan finished after 12637.0437 ms
17-03-01 08:04:39.360 -08 000000042 INF: Image[0]: Y should trigger at 63.460 mm, 2nd row was at 64.369 mm (error = 0.909 mm)
17-03-01 08:04:39.360 -08 000000042 INF: Image[2]: Y should trigger at 63.460 mm, 2nd row was at 64.369 mm (error = 0.909 mm)
17-03-01 08:04:39.362 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.397 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.673 um
17-03-01 08:04:39.397 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.398 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:04:39.399 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:04:39.421 -08 000000035 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:04:39.421 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.422 -08 000000145 INF: ===================Dither Clean Up Command===================
17-03-01 08:04:39.422 -08 000000071 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:04:39.422 -08 000000154 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:04:39.422 -08 000000092 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:04:39.423 -08 000000071 INF: ======================================
17-03-01 08:04:39.423 -08 000000092 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:04:39.423 -08 000000092 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:04:39.423 -08 000000154 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:04:39.423 -08 000000154 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:04:39.423 -08 000000134 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:04:39.423 -08 000000040 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:39.424 -08 000000134 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:04:39.426 -08 000000040 INF: ===================LFT:Extracting coords===================
17-03-01 08:04:39.452 -08 000000040 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:39.453 -08 000000040 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:04:39.454 -08 000000146 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.454 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.454 -08 000000118 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.454 -08 000000135 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.454 -08 000000146 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:39.454 -08 000000093 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:39.454 -08 000000118 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:39.454 -08 000000135 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:39.486 -08 000000059 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:39.486 -08 000000059 INF: FPGA: Recv ZSEL 
17-03-01 08:04:39.486 -08 000000134 INF: FPGA: Xmit ZDACW 38647\n
17-03-01 08:04:39.486 -08 000000092 INF: ======================================
17-03-01 08:04:39.487 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`0 (0x03)\r\n(0xFF)
17-03-01 08:04:39.487 -08 000000018 INF: Current Position of Pump is: 0
17-03-01 08:04:39.489 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:04:39.489 -08 000000154 INF: ======================================
17-03-01 08:04:39.528 -08 000000146 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:39.528 -08 000000093 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:39.528 -08 000000118 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:39.528 -08 000000135 INF: FC:B, C:52,L:1, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:39.546 -08 000000035 INF: FPGA: Recv ZDACW 
17-03-01 08:04:39.546 -08 000000134 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:04:39.547 -08 000000134 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:04:39.587 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1OR\r
17-03-01 08:04:39.610 -08 000000094 INF: FPGA: Recv TDIBB
17-03-01 08:04:39.610 -08 000000134 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:04:39.611 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:39.611 -08 000000134 INF: ======================================
17-03-01 08:04:39.679 -08 000000146 INF: LFT found best fwhm score 2.000017 in 151 ms
17-03-01 08:04:39.679 -08 000000093 INF: LFT found best fwhm score 2.000931 in 151 ms
17-03-01 08:04:39.679 -08 000000093 INF: LFT found good score at index 281 with fwhm value 2.000931. Next cycle, cycle 53 starting Z position for top surface is at -0.151 mm FC:B, C:52,L:1,T
17-03-01 08:04:39.679 -08 000000146 INF: LFT found good score at index 4069 with fwhm value 2.000017. Next cycle, cycle 53 starting Z position for top surface is at -0.150 mm FC:B, C:52,L:1,T
17-03-01 08:04:39.679 -08 000000118 INF: LFT found best fwhm score 2.00025 in 151 ms
17-03-01 08:04:39.679 -08 000000118 INF: LFT found good score at index 2501 with fwhm value 2.00025. Next cycle, cycle 53 starting Z position for top surface is at -0.151 mm FC:B, C:52,L:1,T
17-03-01 08:04:39.680 -08 000000146 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.680 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.680 -08 000000118 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.680 -08 000000135 INF: LFT found best fwhm score 2.094983 in 152 ms
17-03-01 08:04:39.680 -08 000000135 INF: LFT found good score at index 7505 with fwhm value 2.094983. Next cycle, cycle 53 starting Z position for top surface is at -0.149 mm FC:B, C:52,L:1,T
17-03-01 08:04:39.680 -08 000000146 INF: ======================================
17-03-01 08:04:39.680 -08 000000118 INF: ======================================
17-03-01 08:04:39.680 -08 000000135 INF: ===================LookupFocusTracking===================
17-03-01 08:04:39.680 -08 000000093 INF: ======================================
17-03-01 08:04:39.680 -08 000000135 INF: ======================================
17-03-01 08:04:39.681 -08 000000040 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:39.682 -08 000000040 INF: LFT weighted average best Z for top surface is at -0.150mm FC:B, C:52,L:1,T
17-03-01 08:04:39.682 -08 000000040 INF: ======================================
17-03-01 08:04:39.683 -08 000000145 INF: ======================================
17-03-01 08:04:39.684 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.685 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:04:39.685 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.686 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:04:39.686 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.686 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:04:39.686 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.686 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:04:39.686 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:39.687 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308===================
17-03-01 08:04:39.687 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308===================
17-03-01 08:04:39.688 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Waiting for image analysis===================
17-03-01 08:04:39.688 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:39.688 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:04:39.688 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1, Swath 2 - X = 69.73964 Y = 39.76308===================
17-03-01 08:04:39.711 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:39.711 -08 000000042 INF: Waited 24 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 1, buffer wait time 0
17-03-01 08:04:39.711 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:39.711 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:39.711 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:04:39.711 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:39.712 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 1===================
17-03-01 08:04:39.712 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface===================
17-03-01 08:04:39.729 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:39.731 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:39.732 -08 000000042 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:04:39.732 -08 000000042 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:04:39.761 -08 000000004 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1203 Request: {"Cycle":52,"Lane":1,"Tile":1203,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF228","HCSMMF202","HCSMMF208","HCSMMF244"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:39.764 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:39.833 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:04:39.835 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:39.835 -08 000000042 INF: TopSurfaceZPositions[] was -0.155328006931923, so used the TopSurfaceZPositions[] (-0.155328006931923) + compensator value (0.0227).
17-03-01 08:04:39.840 -08 000000042 INF: LFT enabled: Best z-height for LaneTopSurface and Illumina.Instrument.Logic.Sentrix.II.SentrixSection was found to be -0.132628006931923
17-03-01 08:04:39.841 -08 000000042 INF: Lane 2, LaneTopSurface Surface was not flagged for detilt operations prior to ETF. Moving to default tilt positions: m1=5.000498, m2=5.391912, m3=5.33908
17-03-01 08:04:39.842 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:39.844 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:39.858 -08 000000095 INF: ===================Move Tilt Motor 1===================
17-03-01 08:04:39.858 -08 000000095 INF: Tilt Motor 1: Moving to 5.0005 mm, started at 5.0762 mm, delta = -0.0757 mm
17-03-01 08:04:39.859 -08 000000095 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:39.963 -08 000000125 INF: FPGA: Recv T1RD 19984
17-03-01 08:04:39.964 -08 000000095 INF: Tilt Motor 1: Encoder: at motor step 3330 + 4/6
17-03-01 08:04:39.964 -08 000000095 INF: Tilt Motor 1: Moving to 19687 encoder counts
17-03-01 08:04:39.964 -08 000000095 INF: FPGA: Xmit T1MOVETO 19687\n
17-03-01 08:04:39.966 -08 000000117 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1204 Request: {"Cycle":52,"Lane":1,"Tile":1204,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF212","HCSMMF218","HCSMMF259","HCSMMF254"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.002 -08 000000151 INF: ===================Move Tilt Motor 3===================
17-03-01 08:04:40.003 -08 000000151 INF: Tilt Motor 3: Moving to 5.3391 mm, started at 5.2113 mm, delta = 0.1278 mm
17-03-01 08:04:40.003 -08 000000151 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:40.014 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:40.014 -08 000000065 INF: ===================Move Tilt Motor 2===================
17-03-01 08:04:40.015 -08 000000065 INF: Tilt Motor 2: Moving to 5.3919 mm, started at 5.2644 mm, delta = 0.1275 mm
17-03-01 08:04:40.015 -08 000000065 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:40.031 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1201 Request: {"Cycle":52,"Lane":1,"Tile":1201,"Channels":["G","T","C","A"],"MemoryMappedFileNames":["HCSMMF191","HCSMMF200","HCSMMF274","HCSMMF199"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.033 -08 000000009 INF: FPGA: Recv T3RD 20517
17-03-01 08:04:40.033 -08 000000151 INF: Tilt Motor 3: Encoder: at motor step 3419 + 3/6
17-03-01 08:04:40.033 -08 000000151 INF: Tilt Motor 3: Moving to 21020 encoder counts
17-03-01 08:04:40.033 -08 000000151 INF: FPGA: Xmit T3MOVETO 21020\n
17-03-01 08:04:40.048 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1212 Request: {"Cycle":52,"Lane":1,"Tile":1212,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF277","HCSMMF221","HCSMMF251","HCSMMF203"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.049 -08 000000109 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1205 Request: {"Cycle":52,"Lane":1,"Tile":1205,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF257","HCSMMF279","HCSMMF193","HCSMMF194"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.050 -08 000000148 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1210 Request: {"Cycle":52,"Lane":1,"Tile":1210,"Channels":["C","G","A","T"],"MemoryMappedFileNames":["HCSMMF222","HCSMMF238","HCSMMF225","HCSMMF198"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.051 -08 000000133 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1207 Request: {"Cycle":52,"Lane":1,"Tile":1207,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF263","HCSMMF214","HCSMMF265","HCSMMF195"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.052 -08 000000071 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1213 Request: {"Cycle":52,"Lane":1,"Tile":1213,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF215","HCSMMF241","HCSMMF183","HCSMMF261"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.053 -08 000000064 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1211 Request: {"Cycle":52,"Lane":1,"Tile":1211,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF196","HCSMMF278","HCSMMF242","HCSMMF229"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.054 -08 000000059 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1202 Request: {"Cycle":52,"Lane":1,"Tile":1202,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF184","HCSMMF275","HCSMMF185","HCSMMF226"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.055 -08 000000140 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1221 Request: {"Cycle":52,"Lane":1,"Tile":1221,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF206","HCSMMF205","HCSMMF250","HCSMMF247"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.055 -08 000000087 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1218 Request: {"Cycle":52,"Lane":1,"Tile":1218,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF258","HCSMMF240","HCSMMF237","HCSMMF219"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.056 -08 000000105 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1219 Request: {"Cycle":52,"Lane":1,"Tile":1219,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF231","HCSMMF217","HCSMMF236","HCSMMF227"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.057 -08 000000124 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1226 Request: {"Cycle":52,"Lane":1,"Tile":1226,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF235","HCSMMF276","HCSMMF190","HCSMMF281"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.058 -08 000000118 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1227 Request: {"Cycle":52,"Lane":1,"Tile":1227,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF213","HCSMMF204","HCSMMF256","HCSMMF179"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.059 -08 000000061 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1206 Request: {"Cycle":52,"Lane":1,"Tile":1206,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF210","HCSMMF282","HCSMMF209","HCSMMF178"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.059 -08 000000023 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1215 Request: {"Cycle":52,"Lane":1,"Tile":1215,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF243","HCSMMF284","HCSMMF177","HCSMMF255"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.060 -08 000000119 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1209 Request: {"Cycle":52,"Lane":1,"Tile":1209,"Channels":["T","C","G","A"],"MemoryMappedFileNames":["HCSMMF180","HCSMMF249","HCSMMF188","HCSMMF201"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.061 -08 000000130 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1217 Request: {"Cycle":52,"Lane":1,"Tile":1217,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF216","HCSMMF267","HCSMMF270","HCSMMF220"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.062 -08 000000054 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1216 Request: {"Cycle":52,"Lane":1,"Tile":1216,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF234","HCSMMF207","HCSMMF246","HCSMMF176"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.062 -08 000000035 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1214 Request: {"Cycle":52,"Lane":1,"Tile":1214,"Channels":["G","T","A","C"],"MemoryMappedFileNames":["HCSMMF268","HCSMMF192","HCSMMF283","HCSMMF272"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.063 -08 000000116 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1224 Request: {"Cycle":52,"Lane":1,"Tile":1224,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF187","HCSMMF197","HCSMMF182","HCSMMF239"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.064 -08 000000088 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1208 Request: {"Cycle":52,"Lane":1,"Tile":1208,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF181","HCSMMF287","HCSMMF224","HCSMMF260"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.065 -08 000000046 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1220 Request: {"Cycle":52,"Lane":1,"Tile":1220,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF211","HCSMMF271","HCSMMF230","HCSMMF223"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.066 -08 000000082 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1223 Request: {"Cycle":52,"Lane":1,"Tile":1223,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF232","HCSMMF285","HCSMMF252","HCSMMF245"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.067 -08 000000154 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1228 Request: {"Cycle":52,"Lane":1,"Tile":1228,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF248","HCSMMF186","HCSMMF262","HCSMMF286"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.068 -08 000000004 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1225 Request: {"Cycle":52,"Lane":1,"Tile":1225,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF189","HCSMMF233","HCSMMF269","HCSMMF264"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.069 -08 000000092 INF: Notifying RTA to Process Multi MMF for Lane: 1 Cycle: 52 Tile: 1222 Request: {"Cycle":52,"Lane":1,"Tile":1222,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF273","HCSMMF280","HCSMMF253","HCSMMF266"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:40.072 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:40.078 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:40.078 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:04:40.094 -08 000000031 INF: FPGA: Recv T2RD 20726
17-03-01 08:04:40.094 -08 000000065 INF: Tilt Motor 2: Encoder: at motor step 3454 + 2/6
17-03-01 08:04:40.095 -08 000000065 INF: Tilt Motor 2: Moving to 21228 encoder counts
17-03-01 08:04:40.095 -08 000000065 INF: FPGA: Xmit T2MOVETO 21228\n
17-03-01 08:04:40.157 -08 000000040 INF: FPGA: Recv T1MOVETO 49
17-03-01 08:04:40.157 -08 000000095 INF: Tilt Motor 1: To move from 5.076 to 5.000 (-0.076 mm) should take 50 steps, but required 49 steps (0.075 mm). Slippage = -0.002 mm (0.02%)
17-03-01 08:04:40.157 -08 000000095 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:40.178 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V10000A0R\r
17-03-01 08:04:40.189 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:40.189 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:04:40.219 -08 000000145 INF: FPGA: Recv T1RD 19693
17-03-01 08:04:40.219 -08 000000095 INF: Tilt Motor 1: Encoder: at motor step 3282 + 1/6
17-03-01 08:04:40.219 -08 000000095 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:40.225 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:40.231 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:04:40.268 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:40.280 -08 000000130 INF: FPGA: Recv T1RD 19693
17-03-01 08:04:40.280 -08 000000130 INF: FPGA: Recv T3MOVETO 83
17-03-01 08:04:40.280 -08 000000095 INF: Tilt Motor 1: Encoder: at motor step 3282 + 1/6
17-03-01 08:04:40.280 -08 000000151 INF: Tilt Motor 3: To move from 5.211 to 5.339 (0.128 mm) should take 84 steps, but required 83 steps (0.126 mm). Slippage = -0.002 mm (-0.01%)
17-03-01 08:04:40.280 -08 000000095 INF: FPGA: Xmit T1RD\n
17-03-01 08:04:40.281 -08 000000151 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:40.332 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:40.337 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:04:40.342 -08 000000004 INF: FPGA: Recv T1RD 19693
17-03-01 08:04:40.342 -08 000000004 INF: FPGA: Recv T3RD 21015
17-03-01 08:04:40.342 -08 000000004 INF: FPGA: Recv T2MOVETO 83
17-03-01 08:04:40.342 -08 000000095 INF: Tilt Motor 1: Encoder: at motor step 3282 + 1/6
17-03-01 08:04:40.342 -08 000000065 INF: Tilt Motor 2: To move from 5.264 to 5.392 (0.128 mm) should take 84 steps, but required 83 steps (0.126 mm). Slippage = -0.002 mm (-0.01%)
17-03-01 08:04:40.342 -08 000000151 INF: Tilt Motor 3: Encoder: at motor step 3502 + 3/6
17-03-01 08:04:40.342 -08 000000065 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:40.342 -08 000000095 INF: Tilt Motor 1: After move to 5.0005, error = 0.0015, min/max error = -0.0015/0.0019, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:40.342 -08 000000095 INF: Tilt Motor 1: Moved to 5.0020 after 483.9241 ms
17-03-01 08:04:40.343 -08 000000095 INF: ======================================
17-03-01 08:04:40.343 -08 000000151 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:40.368 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:40.406 -08 000000054 INF: FPGA: Recv T2RD 21224
17-03-01 08:04:40.406 -08 000000054 INF: FPGA: Recv T3RD 21014
17-03-01 08:04:40.406 -08 000000151 INF: Tilt Motor 3: Encoder: at motor step 3502 + 2/6
17-03-01 08:04:40.406 -08 000000065 INF: Tilt Motor 2: Encoder: at motor step 3537 + 2/6
17-03-01 08:04:40.406 -08 000000151 INF: FPGA: Xmit T3RD\n
17-03-01 08:04:40.407 -08 000000065 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:40.445 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:40.451 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:04:40.454 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:40.454 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Aspirating port PortB===================
17-03-01 08:04:40.467 -08 000000023 INF: FPGA: Recv T3RD 21014
17-03-01 08:04:40.467 -08 000000023 INF: FPGA: Recv T2RD 21224
17-03-01 08:04:40.467 -08 000000065 INF: Tilt Motor 2: Encoder: at motor step 3537 + 2/6
17-03-01 08:04:40.467 -08 000000151 INF: Tilt Motor 3: Encoder: at motor step 3502 + 2/6
17-03-01 08:04:40.467 -08 000000151 INF: Tilt Motor 3: After move to 5.3391, error = -0.0015, min/max error = -0.0017/0.0016, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:40.467 -08 000000065 INF: FPGA: Xmit T2RD\n
17-03-01 08:04:40.467 -08 000000151 INF: Tilt Motor 3: Moved to 5.3376 after 464.0425 ms
17-03-01 08:04:40.467 -08 000000151 INF: ======================================
17-03-01 08:04:40.529 -08 000000117 INF: FPGA: Recv T2RD 21224
17-03-01 08:04:40.529 -08 000000065 INF: Tilt Motor 2: Encoder: at motor step 3537 + 2/6
17-03-01 08:04:40.529 -08 000000065 INF: Tilt Motor 2: After move to 5.3919, error = -0.0010, min/max error = -0.0020/0.0015, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:40.529 -08 000000065 INF: Tilt Motor 2: Moved to 5.3909 after 514.2496 ms
17-03-01 08:04:40.529 -08 000000065 INF: ======================================
17-03-01 08:04:40.530 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:40.531 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:40.532 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:40.533 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:40.533 -08 000000042 INF: Compensator: Remaining IntoPath
17-03-01 08:04:40.533 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:40.534 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:40.540 -08 000000042 INF: Swath 1 position calculated to be: {X=71.39664, Y=39.76308} from estimated center X= 71.91199, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:04:40.540 -08 000000042 INF: Swath 2 position calculated to be: {X=72.50464, Y=39.76308} from estimated center X= 71.91199, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:04:40.543 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:40.546 -08 000000042 INF: Swath 0: Converted transform from (-75.86636, 56.81514) pixels to (-0.02622, 0.019665) mm.
17-03-01 08:04:40.551 -08 000000042 INF: Swath 1: Converted transform from (-80.8046, 55.09994) pixels to (-0.027945, 0.018975) mm.
17-03-01 08:04:40.551 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308===================
17-03-01 08:04:40.552 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308===================
17-03-01 08:04:40.552 -08 000000042 INF: Transformed XStagePosition from 71.39664 mm to 71.370416963473 mm.
17-03-01 08:04:40.554 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V800IP11904R\r
17-03-01 08:04:40.563 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5727543545663 mm.
17-03-01 08:04:40.563 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3727543545663 mm.
17-03-01 08:04:40.563 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4635043545663 mm.
17-03-01 08:04:40.565 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:40.565 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:04:40.565 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:40.566 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -147.4 um, section = B_1
17-03-01 08:04:40.570 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:40.570 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:40.571 -08 000000080 INF: ===================MoveEmissionFilters===================
17-03-01 08:04:40.571 -08 000000109 INF: ===================Move X,Y===================
17-03-01 08:04:40.571 -08 000000116 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:40.572 -08 000000036 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:40.572 -08 000000131 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:40.572 -08 000000118 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:40.572 -08 000000109 INF: ===================Move X,Y, Parallel===================
17-03-01 08:04:40.572 -08 000000009 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:40.572 -08 000000116 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:04:40.572 -08 000000116 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:04:40.572 -08 000000116 INF: Z Motor: Moving to -0.1526 mm, started at -0.1474 mm
17-03-01 08:04:40.572 -08 000000116 INF: FPGA: Xmit ZTRG 0\n
17-03-01 08:04:40.572 -08 000000036 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:40.573 -08 000000131 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:40.573 -08 000000060 INF: ===================Move X Motor without settling===================
17-03-01 08:04:40.573 -08 000000140 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:40.573 -08 000000009 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:40.573 -08 000000060 INF: X Motor: Xmit PR VM\n
17-03-01 08:04:40.573 -08 000000118 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:40.573 -08 000000140 INF: Y Motor: Moving to 64.5728 mm @25.000 mm/sec, started at 14.9213 mm
17-03-01 08:04:40.573 -08 000000140 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:40.573 -08 000000140 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:40.573 -08 000000105 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:04:40.573 -08 000000124 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:04:40.573 -08 000000130 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:04:40.574 -08 000000093 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:04:40.574 -08 000000150 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:04:40.574 -08 000000063 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:04:40.574 -08 000000093 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:04:40.574 -08 000000124 INF: ======================================
17-03-01 08:04:40.574 -08 000000023 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:04:40.574 -08 000000108 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:04:40.574 -08 000000063 INF: ======================================
17-03-01 08:04:40.575 -08 000000108 INF: ======================================
17-03-01 08:04:40.575 -08 000000023 INF: ======================================
17-03-01 08:04:40.575 -08 000000093 INF: ======================================
17-03-01 08:04:40.576 -08 000000118 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:40.577 -08 000000105 INF: ======================================
17-03-01 08:04:40.577 -08 000000130 INF: ======================================
17-03-01 08:04:40.577 -08 000000150 INF: ======================================
17-03-01 08:04:40.577 -08 000000118 INF: ======================================
17-03-01 08:04:40.578 -08 000000036 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:40.578 -08 000000131 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:40.578 -08 000000009 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:40.579 -08 000000036 INF: ======================================
17-03-01 08:04:40.579 -08 000000131 INF: ======================================
17-03-01 08:04:40.580 -08 000000009 INF: ======================================
17-03-01 08:04:40.581 -08 000000080 INF: ======================================
17-03-01 08:04:40.593 -08 000000154 INF: FPGA: Recv ZTRG 
17-03-01 08:04:40.593 -08 000000116 INF: FPGA: Xmit ZYT 0 3\n
17-03-01 08:04:40.641 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:40.642 -08 000000060 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:04:40.642 -08 000000060 INF: X Motor: Xmit PR VI\n
17-03-01 08:04:40.643 -08 000000140 INF: Y Motor: Recv ok\r
17-03-01 08:04:40.643 -08 000000140 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:40.643 -08 000000140 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:40.655 -08 000000137 INF: FPGA: Recv ZYT 
17-03-01 08:04:40.655 -08 000000116 INF: Z Motor: ZMV will trigger camera immediately and ramp is HW controlled
17-03-01 08:04:40.655 -08 000000116 INF: FPGA: Xmit ZMV 40010\n
17-03-01 08:04:40.703 -08 000000140 INF: Y Motor: Recv ok\r
17-03-01 08:04:40.703 -08 000000140 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:40.703 -08 000000060 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:04:40.703 -08 000000060 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:04:40.703 -08 000000060 INF: X Motor: Moving to 71.3704 mm @15.000 mm/sec, started at 69.6909 mm
17-03-01 08:04:40.703 -08 000000060 INF: X Motor: Xmit MA 5067\n
17-03-01 08:04:40.716 -08 000000023 INF: FPGA: Recv @LOG Trigger Camera
17-03-01 08:04:40.716 -08 000000023 INF: FPGA: Recv ZMV 
17-03-01 08:04:40.716 -08 000000006 INF: FPGA: Trigger Camera
17-03-01 08:04:40.716 -08 000000116 INF: Z Motor: MoveAndTrigger 'ZMV' command took 60.9802 ms
17-03-01 08:04:40.716 -08 000000116 INF: FPGA: Xmit ZDACR\n
17-03-01 08:04:40.741 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:40.765 -08 000000140 INF: Y Motor: Recv v 0\r
17-03-01 08:04:40.765 -08 000000140 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:40.765 -08 000000060 INF: X Motor: Recv MA 5067\r\n>
17-03-01 08:04:40.765 -08 000000140 INF: Y Motor: Set target position to 5957275 encoder counts
17-03-01 08:04:40.765 -08 000000140 INF: Y Motor: Xmit s r0xca 5957275\r
17-03-01 08:04:40.765 -08 000000060 INF: X Motor: WaitUntilStopped 60112
17-03-01 08:04:40.781 -08 000000009 INF: FPGA: Recv ZDACR 40010
17-03-01 08:04:40.781 -08 000000116 INF: Z Motor: MoveAndTrigger took 208.6636 ms w/comms
17-03-01 08:04:40.781 -08 000000116 INF: Z Motor: After move to -0.1526, error = 0.0000, min/max error = 0.0000/0.0000, tolerance = 0.0010 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:04:40.781 -08 000000116 INF: Z Motor: MoveAbsStepped took 208.8305 ms
17-03-01 08:04:40.781 -08 000000116 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:40.783 -08 000000116 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:04:40.784 -08 000000046 INF: ===================TDI Scan Setup===================
17-03-01 08:04:40.784 -08 000000065 INF: ===================Camera Arm TDI===================
17-03-01 08:04:40.785 -08 000000046 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:40.785 -08 000000065 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:40.785 -08 000000046 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:40.786 -08 000000065 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:40.786 -08 000000046 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:40.786 -08 000000046 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:04:40.825 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:04:40.828 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:40.829 -08 000000140 INF: Y Motor: Recv ok\r
17-03-01 08:04:40.829 -08 000000140 INF: Y Motor: Start the move command
17-03-01 08:04:40.829 -08 000000140 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:40.843 -08 000000093 INF: FPGA: Recv ZSEL 
17-03-01 08:04:40.844 -08 000000046 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:40.844 -08 000000046 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:04:40.891 -08 000000140 INF: Y Motor: Recv ok\r
17-03-01 08:04:40.891 -08 000000140 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:04:40.891 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:40.904 -08 000000151 INF: FPGA: Recv TDIBB
17-03-01 08:04:40.904 -08 000000046 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:40.905 -08 000000046 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:40.906 -08 000000046 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:40.907 -08 000000046 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:04:40.908 -08 000000046 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:04:40.908 -08 000000046 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:04:40.966 -08 000000133 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:40.966 -08 000000046 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:40.968 -08 000000046 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:04:40.968 -08 000000046 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:40.970 -08 000000046 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:04:40.970 -08 000000046 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:04:40.970 -08 000000046 INF: Z Motor: Arming to move to -0.1126 mm
17-03-01 08:04:40.970 -08 000000046 INF: FPGA: Xmit ZYT 6437275 4\n
17-03-01 08:04:41.016 -08 000000140 INF: Y Motor: Unshifted Position: 1076180
17-03-01 08:04:41.029 -08 000000082 INF: FPGA: Recv ZYT 
17-03-01 08:04:41.029 -08 000000046 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1576180 enc / 15.762 mm / ) = 6437275 enc / 64.373 mm
17-03-01 08:04:41.029 -08 000000046 INF: FPGA: Xmit ZARM 29524\n
17-03-01 08:04:41.066 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:41.078 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:41.091 -08 000000004 INF: FPGA: Recv ZARM
17-03-01 08:04:41.091 -08 000000046 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 61.8394 ms
17-03-01 08:04:41.091 -08 000000046 INF: Z Motor: ArmAbsStepped took 120.6997 ms
17-03-01 08:04:41.091 -08 000000046 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:41.093 -08 000000046 INF: ===================TDI Scan Setup===================
17-03-01 08:04:41.094 -08 000000046 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:04:41.095 -08 000000046 INF: ===================TDI Scan Setup===================
17-03-01 08:04:41.096 -08 000000046 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:04:41.097 -08 000000046 INF: ===================TDI Scan Setup===================
17-03-01 08:04:41.098 -08 000000046 INF: ======================================
17-03-01 08:04:41.138 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:41.189 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:41.327 -08 000000140 INF: Y Motor: Unshifted Position: 1782121
17-03-01 08:04:41.377 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:41.388 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:41.389 -08 000000060 INF: X Motor: Xmit PR ER\n
17-03-01 08:04:41.422 -08 000000065 INF: Camera #0 AttachBuffer (imageDataPtr = 56923197488 imgPtr = 56923197488 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:41.423 -08 000000065 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:41.423 -08 000000065 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:41.438 -08 000000065 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:41.440 -08 000000065 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:41.451 -08 000000060 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:04:41.451 -08 000000060 INF: X Motor: Moved to 71.3706 after 686 ms
17-03-01 08:04:41.451 -08 000000060 INF: ======================================
17-03-01 08:04:41.452 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:41.501 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:41.640 -08 000000140 INF: Y Motor: Unshifted Position: 2557148
17-03-01 08:04:41.690 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:41.702 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:41.762 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:41.813 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:41.953 -08 000000140 INF: Y Motor: Unshifted Position: 3339595
17-03-01 08:04:42.003 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.012 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:42.074 -08 000000065 INF: Camera #2 AttachBuffer (imageDataPtr = 58735136816 imgPtr = 64223121456 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:42.075 -08 000000065 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:42.075 -08 000000065 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:42.076 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:42.090 -08 000000065 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:42.092 -08 000000065 INF: ===================Camera Arm TDI===================
17-03-01 08:04:42.094 -08 000000065 INF: ======================================
17-03-01 08:04:42.096 -08 000000116 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:42.097 -08 000000116 INF: ======================================
17-03-01 08:04:42.127 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.266 -08 000000140 INF: Y Motor: Unshifted Position: 4120502
17-03-01 08:04:42.316 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.326 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:42.386 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:42.437 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.577 -08 000000140 INF: Y Motor: Unshifted Position: 4901273
17-03-01 08:04:42.627 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.636 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:42.699 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:42.750 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.888 -08 000000140 INF: Y Motor: Unshifted Position: 5677673
17-03-01 08:04:42.938 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:42.949 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:43.010 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:43.061 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:43.198 -08 000000140 INF: Y Motor: Unshifted Position: 5957277
17-03-01 08:04:43.248 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:43.260 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:43.323 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:43.386 -08 000000140 INF: Y Motor: Unshifted Position: 5957276
17-03-01 08:04:43.386 -08 000000140 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:43.386 -08 000000140 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:43.449 -08 000000140 INF: Y Motor: Recv v 0\r
17-03-01 08:04:43.449 -08 000000140 INF: Y Motor: Moved to 64.5728 after 2558 ms
17-03-01 08:04:43.449 -08 000000140 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:43.512 -08 000000140 INF: Y Motor: Recv v 4096\r
17-03-01 08:04:43.512 -08 000000140 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:43.512 -08 000000140 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:43.574 -08 000000140 INF: Y Motor: Recv v 0\r
17-03-01 08:04:43.574 -08 000000140 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:43.574 -08 000000140 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:43.574 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:43.635 -08 000000140 INF: Y Motor: Recv v 402653184\r
17-03-01 08:04:43.635 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:43.635 -08 000000140 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:04:43.635 -08 000000140 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:43.635 -08 000000140 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:43.700 -08 000000140 INF: Y Motor: Recv v 0\r
17-03-01 08:04:43.700 -08 000000140 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:43.700 -08 000000140 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:43.700 -08 000000140 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:43.760 -08 000000140 INF: Y Motor: Recv ok\r
17-03-01 08:04:43.760 -08 000000140 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:43.760 -08 000000140 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:43.822 -08 000000140 INF: Y Motor: Recv ok\r
17-03-01 08:04:43.822 -08 000000140 INF: ======================================
17-03-01 08:04:43.823 -08 000000109 INF: ===================Move X,Y===================
17-03-01 08:04:43.824 -08 000000109 INF: ======================================
17-03-01 08:04:43.825 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:43.826 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:43.826 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:04:43.826 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:04:43.899 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:43.900 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:04:43.900 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:04:43.916 -08 000000062 INF: FPGA: Recv ZFREQCL
17-03-01 08:04:43.916 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:04:43.916 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:43.917 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:43.963 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:43.977 -08 000000109 INF: FPGA: Recv TDIYERD 6457276
17-03-01 08:04:43.977 -08 000000042 INF: Before scan, Y encoder from FPGA = 6457276 counts (64.573 mm)
17-03-01 08:04:43.977 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:43.978 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:43.979 -08 000000088 INF: ===================Set YMotor gains for scans===================
17-03-01 08:04:43.979 -08 000000125 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:43.979 -08 000000088 INF: ======================================
17-03-01 08:04:43.980 -08 000000125 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:43.980 -08 000000125 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:04:43.980 -08 000000125 INF: FPGA: Xmit TDIYPOS 6346350\n
17-03-01 08:04:44.041 -08 000000062 INF: FPGA: Recv TDIYPOS
17-03-01 08:04:44.041 -08 000000125 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:44.043 -08 000000125 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:04:44.043 -08 000000125 INF: FPGA: Xmit TDIYARM3 139264 6437275 1 1\n
17-03-01 08:04:44.103 -08 000000109 INF: FPGA: Recv TDIYARM3
17-03-01 08:04:44.104 -08 000000125 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:44.105 -08 000000125 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:44.106 -08 000000125 INF: ======================================
17-03-01 08:04:44.107 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:44.108 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:44.108 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:44.109 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:44.109 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:44.110 -08 000000151 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:04:44.110 -08 000000080 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:04:44.110 -08 000000151 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:04:44.110 -08 000000151 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:04:44.110 -08 000000151 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:04:44.110 -08 000000080 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:04:44.110 -08 000000151 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:04:44.110 -08 000000080 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:04:44.110 -08 000000080 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:04:44.113 -08 000000080 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:04:44.213 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:44.274 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:44.524 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:44.540 -08 000000148 INF: FPGA: Recv EX2MV
17-03-01 08:04:44.540 -08 000000148 INF: FPGA: Recv EX1MV
17-03-01 08:04:44.540 -08 000000151 INF: Excitation Filter 2: Moved -107 steps in 429.4604 ms
17-03-01 08:04:44.540 -08 000000151 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 429.6421 ms
17-03-01 08:04:44.540 -08 000000151 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 429.7918 ms
17-03-01 08:04:44.540 -08 000000080 INF: Excitation Filter 1: Moved -107 steps in 429.3581 ms
17-03-01 08:04:44.540 -08 000000080 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 429.8428 ms
17-03-01 08:04:44.540 -08 000000080 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 429.9352 ms
17-03-01 08:04:44.540 -08 000000151 INF: ======================================
17-03-01 08:04:44.541 -08 000000080 INF: ======================================
17-03-01 08:04:44.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:44.543 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:44.544 -08 000000092 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:44.544 -08 000000131 INF: ===================FPGA Z Wait===================
17-03-01 08:04:44.544 -08 000000153 INF: ===================Camera TDI===================
17-03-01 08:04:44.544 -08 000000131 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:04:44.544 -08 000000061 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:44.545 -08 000000061 INF: Y Motor: Moving to 14.9244 mm @6.500 mm/sec, started at 64.5728 mm
17-03-01 08:04:44.545 -08 000000092 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:04:44.545 -08 000000061 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:44.545 -08 000000061 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:44.546 -08 000000153 INF: ===================Camera TDI, Parallel===================
17-03-01 08:04:44.546 -08 000000092 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:04:44.547 -08 000000109 INF: ===================Camera TDI===================
17-03-01 08:04:44.547 -08 000000095 INF: ===================Camera TDI===================
17-03-01 08:04:44.549 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:44.549 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:44.549 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:44.549 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:44.586 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:44.588 -08 000000061 INF: Y Motor: Recv ok\r
17-03-01 08:04:44.588 -08 000000061 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:44.588 -08 000000061 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:44.651 -08 000000061 INF: Y Motor: Recv ok\r
17-03-01 08:04:44.651 -08 000000061 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:44.699 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:44.699 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:44.699 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:44.699 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:44.713 -08 000000061 INF: Y Motor: Recv v 0\r
17-03-01 08:04:44.713 -08 000000061 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:44.713 -08 000000061 INF: Y Motor: Set target position to 992442 encoder counts
17-03-01 08:04:44.713 -08 000000061 INF: Y Motor: Xmit s r0xca 992442\r
17-03-01 08:04:44.775 -08 000000061 INF: Y Motor: Recv ok\r
17-03-01 08:04:44.775 -08 000000061 INF: Y Motor: Start the move command
17-03-01 08:04:44.775 -08 000000061 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:44.836 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:44.838 -08 000000061 INF: Y Motor: Recv ok\r
17-03-01 08:04:44.838 -08 000000061 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:04:44.838 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:44.849 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:44.849 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:44.849 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:44.849 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:44.899 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:44.913 -08 000000140 INF: FPGA: Recv ZWAIT 
17-03-01 08:04:44.913 -08 000000131 INF: ======================================
17-03-01 08:04:44.961 -08 000000061 INF: Y Motor: Unshifted Position: 5894773
17-03-01 08:04:44.999 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:04:44.999 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:04:44.999 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:04:44.999 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:04:44.999 -08 000000095 INF: ===================Camera #0 Frame #5===================
17-03-01 08:04:45.000 -08 000000109 INF: ===================Camera #2 Frame #5===================
17-03-01 08:04:45.011 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:45.138 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:45.149 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:45.172 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 11, frameCount = 12.
17-03-01 08:04:45.172 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 11, frameCount = 12.
17-03-01 08:04:45.172 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 12
17-03-01 08:04:45.172 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 12
17-03-01 08:04:45.172 -08 000000095 INF: ===================Camera #0 Frame #12===================
17-03-01 08:04:45.172 -08 000000109 INF: ===================Camera #2 Frame #12===================
17-03-01 08:04:45.210 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:45.274 -08 000000061 INF: Y Motor: Unshifted Position: 5692409
17-03-01 08:04:45.324 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:45.345 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 17, frameCount = 18.
17-03-01 08:04:45.345 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 18
17-03-01 08:04:45.345 -08 000000095 INF: ===================Camera #0 Frame #18===================
17-03-01 08:04:45.357 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 17, frameCount = 18.
17-03-01 08:04:45.357 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 18
17-03-01 08:04:45.357 -08 000000109 INF: ===================Camera #2 Frame #18===================
17-03-01 08:04:45.450 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:45.460 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:45.520 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:04:45.520 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:04:45.520 -08 000000095 INF: ===================Camera #0 Frame #24===================
17-03-01 08:04:45.524 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:45.533 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 24, frameCount = 25.
17-03-01 08:04:45.533 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 25
17-03-01 08:04:45.533 -08 000000109 INF: ===================Camera #2 Frame #25===================
17-03-01 08:04:45.585 -08 000000061 INF: Y Motor: Unshifted Position: 5488742
17-03-01 08:04:45.635 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:45.689 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 30, frameCount = 31.
17-03-01 08:04:45.689 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 31
17-03-01 08:04:45.689 -08 000000095 INF: ===================Camera #0 Frame #31===================
17-03-01 08:04:45.706 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 30, frameCount = 31.
17-03-01 08:04:45.706 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 31
17-03-01 08:04:45.706 -08 000000109 INF: ===================Camera #2 Frame #31===================
17-03-01 08:04:45.761 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:45.774 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:45.834 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:45.861 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:04:45.861 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:04:45.861 -08 000000095 INF: ===================Camera #0 Frame #37===================
17-03-01 08:04:45.876 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 37, frameCount = 38.
17-03-01 08:04:45.876 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 38
17-03-01 08:04:45.876 -08 000000109 INF: ===================Camera #2 Frame #38===================
17-03-01 08:04:45.899 -08 000000061 INF: Y Motor: Unshifted Position: 5286588
17-03-01 08:04:45.949 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.029 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:04:46.029 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:04:46.029 -08 000000095 INF: ===================Camera #0 Frame #43===================
17-03-01 08:04:46.049 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 43, frameCount = 44.
17-03-01 08:04:46.049 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 44
17-03-01 08:04:46.049 -08 000000109 INF: ===================Camera #2 Frame #44===================
17-03-01 08:04:46.073 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.084 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:46.147 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:46.198 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 48, frameCount = 49.
17-03-01 08:04:46.198 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 49
17-03-01 08:04:46.198 -08 000000095 INF: ===================Camera #0 Frame #49===================
17-03-01 08:04:46.209 -08 000000061 INF: Y Motor: Unshifted Position: 5082920
17-03-01 08:04:46.219 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:04:46.219 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:04:46.219 -08 000000109 INF: ===================Camera #2 Frame #50===================
17-03-01 08:04:46.259 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.366 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:04:46.366 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:04:46.366 -08 000000095 INF: ===================Camera #0 Frame #56===================
17-03-01 08:04:46.385 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.389 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:04:46.389 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:04:46.389 -08 000000109 INF: ===================Camera #2 Frame #56===================
17-03-01 08:04:46.397 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:46.460 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:46.522 -08 000000061 INF: Y Motor: Unshifted Position: 4879469
17-03-01 08:04:46.537 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:04:46.537 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:04:46.537 -08 000000095 INF: ===================Camera #0 Frame #62===================
17-03-01 08:04:46.558 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 62, frameCount = 63.
17-03-01 08:04:46.558 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 63
17-03-01 08:04:46.558 -08 000000109 INF: ===================Camera #2 Frame #63===================
17-03-01 08:04:46.572 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.696 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.705 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:04:46.705 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:04:46.705 -08 000000095 INF: ===================Camera #0 Frame #68===================
17-03-01 08:04:46.710 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:46.730 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 68, frameCount = 69.
17-03-01 08:04:46.730 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 69
17-03-01 08:04:46.730 -08 000000109 INF: ===================Camera #2 Frame #69===================
17-03-01 08:04:46.771 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:46.834 -08 000000061 INF: Y Motor: Unshifted Position: 4677323
17-03-01 08:04:46.873 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 73, frameCount = 74.
17-03-01 08:04:46.873 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 74
17-03-01 08:04:46.873 -08 000000095 INF: ===================Camera #0 Frame #74===================
17-03-01 08:04:46.884 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:46.899 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:04:46.899 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:04:46.899 -08 000000109 INF: ===================Camera #2 Frame #75===================
17-03-01 08:04:47.010 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:47.021 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:47.041 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 79, frameCount = 80.
17-03-01 08:04:47.041 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 80
17-03-01 08:04:47.041 -08 000000095 INF: ===================Camera #0 Frame #80===================
17-03-01 08:04:47.068 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:04:47.068 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:04:47.068 -08 000000109 INF: ===================Camera #2 Frame #81===================
17-03-01 08:04:47.084 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:47.146 -08 000000061 INF: Y Motor: Unshifted Position: 4473643
17-03-01 08:04:47.196 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:47.209 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:04:47.209 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:04:47.209 -08 000000095 INF: ===================Camera #0 Frame #87===================
17-03-01 08:04:47.238 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 87, frameCount = 88.
17-03-01 08:04:47.238 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 88
17-03-01 08:04:47.238 -08 000000109 INF: ===================Camera #2 Frame #88===================
17-03-01 08:04:47.321 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:47.334 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:47.380 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:04:47.380 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:04:47.380 -08 000000095 INF: ===================Camera #0 Frame #93===================
17-03-01 08:04:47.395 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:47.410 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 93, frameCount = 94.
17-03-01 08:04:47.410 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 94
17-03-01 08:04:47.410 -08 000000109 INF: ===================Camera #2 Frame #94===================
17-03-01 08:04:47.459 -08 000000061 INF: Y Motor: Unshifted Position: 4271279
17-03-01 08:04:47.488 -08 000000031 INF: RunCopyService queue size at 3/1/2017 8:04:47 AM is 9
17-03-01 08:04:47.585 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:47.585 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:04:47.585 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:04:47.585 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:04:47.585 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:04:47.586 -08 000000109 INF: ===================Camera #2 Frame #100===================
17-03-01 08:04:47.586 -08 000000095 INF: ===================Camera #0 Frame #100===================
17-03-01 08:04:47.645 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:47.695 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:47.709 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:47.755 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 106, frameCount = 107.
17-03-01 08:04:47.755 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 107
17-03-01 08:04:47.755 -08 000000109 INF: ===================Camera #2 Frame #107===================
17-03-01 08:04:47.762 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 106, frameCount = 107.
17-03-01 08:04:47.762 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 107
17-03-01 08:04:47.762 -08 000000095 INF: ===================Camera #0 Frame #107===================
17-03-01 08:04:47.833 -08 000000061 INF: Y Motor: Unshifted Position: 4028830
17-03-01 08:04:47.883 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:47.927 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 112, frameCount = 113.
17-03-01 08:04:47.927 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 113
17-03-01 08:04:47.927 -08 000000109 INF: ===================Camera #2 Frame #113===================
17-03-01 08:04:47.933 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 112, frameCount = 113.
17-03-01 08:04:47.933 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 113
17-03-01 08:04:47.933 -08 000000095 INF: ===================Camera #0 Frame #113===================
17-03-01 08:04:47.959 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:48.008 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.019 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:48.096 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 118, frameCount = 119.
17-03-01 08:04:48.096 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 119
17-03-01 08:04:48.096 -08 000000109 INF: ===================Camera #2 Frame #119===================
17-03-01 08:04:48.101 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 118, frameCount = 119.
17-03-01 08:04:48.101 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 119
17-03-01 08:04:48.101 -08 000000095 INF: ===================Camera #0 Frame #119===================
17-03-01 08:04:48.146 -08 000000061 INF: Y Motor: Unshifted Position: 3825170
17-03-01 08:04:48.196 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.265 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 124, frameCount = 125.
17-03-01 08:04:48.265 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 125
17-03-01 08:04:48.265 -08 000000109 INF: ===================Camera #2 Frame #125===================
17-03-01 08:04:48.269 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:48.270 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 125, frameCount = 126.
17-03-01 08:04:48.270 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 126
17-03-01 08:04:48.270 -08 000000095 INF: ===================Camera #0 Frame #126===================
17-03-01 08:04:48.318 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.333 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:48.434 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 131, frameCount = 132.
17-03-01 08:04:48.434 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 132
17-03-01 08:04:48.434 -08 000000109 INF: ===================Camera #2 Frame #132===================
17-03-01 08:04:48.442 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 131, frameCount = 132.
17-03-01 08:04:48.442 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 132
17-03-01 08:04:48.442 -08 000000095 INF: ===================Camera #0 Frame #132===================
17-03-01 08:04:48.458 -08 000000061 INF: Y Motor: Unshifted Position: 3621708
17-03-01 08:04:48.508 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.583 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:48.606 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 137, frameCount = 138.
17-03-01 08:04:48.606 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 138
17-03-01 08:04:48.606 -08 000000109 INF: ===================Camera #2 Frame #138===================
17-03-01 08:04:48.610 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 137, frameCount = 138.
17-03-01 08:04:48.610 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 138
17-03-01 08:04:48.610 -08 000000095 INF: ===================Camera #0 Frame #138===================
17-03-01 08:04:48.630 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.643 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:48.768 -08 000000061 INF: Y Motor: Unshifted Position: 3419347
17-03-01 08:04:48.776 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 143, frameCount = 144.
17-03-01 08:04:48.776 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 144
17-03-01 08:04:48.776 -08 000000109 INF: ===================Camera #2 Frame #144===================
17-03-01 08:04:48.779 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 143, frameCount = 144.
17-03-01 08:04:48.779 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 144
17-03-01 08:04:48.779 -08 000000095 INF: ===================Camera #0 Frame #144===================
17-03-01 08:04:48.818 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.893 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:48.942 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:48.945 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 150, frameCount = 151.
17-03-01 08:04:48.945 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 151
17-03-01 08:04:48.945 -08 000000109 INF: ===================Camera #2 Frame #151===================
17-03-01 08:04:48.947 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 150, frameCount = 151.
17-03-01 08:04:48.947 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 151
17-03-01 08:04:48.947 -08 000000095 INF: ===================Camera #0 Frame #151===================
17-03-01 08:04:48.957 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:49.080 -08 000000061 INF: Y Motor: Unshifted Position: 3216541
17-03-01 08:04:49.117 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 156, frameCount = 157.
17-03-01 08:04:49.117 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 157
17-03-01 08:04:49.117 -08 000000109 INF: ===================Camera #2 Frame #157===================
17-03-01 08:04:49.118 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 156, frameCount = 157.
17-03-01 08:04:49.118 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 157
17-03-01 08:04:49.118 -08 000000095 INF: ===================Camera #0 Frame #157===================
17-03-01 08:04:49.130 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:49.207 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:49.256 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:49.266 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:49.288 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 162, frameCount = 163.
17-03-01 08:04:49.288 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 163
17-03-01 08:04:49.288 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 162, frameCount = 163.
17-03-01 08:04:49.288 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 163
17-03-01 08:04:49.288 -08 000000095 INF: ===================Camera #0 Frame #163===================
17-03-01 08:04:49.288 -08 000000109 INF: ===================Camera #2 Frame #163===================
17-03-01 08:04:49.391 -08 000000061 INF: Y Motor: Unshifted Position: 3014186
17-03-01 08:04:49.441 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:49.456 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:04:49.456 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:04:49.456 -08 000000095 INF: ===================Camera #0 Frame #169===================
17-03-01 08:04:49.457 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:04:49.457 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:04:49.457 -08 000000109 INF: ===================Camera #2 Frame #169===================
17-03-01 08:04:49.516 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:49.567 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:49.579 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:49.624 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 175, frameCount = 176.
17-03-01 08:04:49.624 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 176
17-03-01 08:04:49.624 -08 000000095 INF: ===================Camera #0 Frame #176===================
17-03-01 08:04:49.626 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 175, frameCount = 176.
17-03-01 08:04:49.626 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 176
17-03-01 08:04:49.626 -08 000000109 INF: ===================Camera #2 Frame #176===================
17-03-01 08:04:49.704 -08 000000061 INF: Y Motor: Unshifted Position: 2810723
17-03-01 08:04:49.754 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:49.797 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 181, frameCount = 182.
17-03-01 08:04:49.797 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 182
17-03-01 08:04:49.797 -08 000000095 INF: ===================Camera #0 Frame #182===================
17-03-01 08:04:49.800 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 181, frameCount = 182.
17-03-01 08:04:49.800 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 182
17-03-01 08:04:49.800 -08 000000109 INF: ===================Camera #2 Frame #182===================
17-03-01 08:04:49.829 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:49.878 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:49.892 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:49.966 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:04:49.966 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:04:49.966 -08 000000095 INF: ===================Camera #0 Frame #188===================
17-03-01 08:04:49.970 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:04:49.970 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:04:49.970 -08 000000109 INF: ===================Camera #2 Frame #188===================
17-03-01 08:04:50.018 -08 000000061 INF: Y Motor: Unshifted Position: 2607064
17-03-01 08:04:50.068 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:50.136 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 193, frameCount = 194.
17-03-01 08:04:50.136 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 194
17-03-01 08:04:50.136 -08 000000095 INF: ===================Camera #0 Frame #194===================
17-03-01 08:04:50.140 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 194, frameCount = 195.
17-03-01 08:04:50.140 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 195
17-03-01 08:04:50.140 -08 000000109 INF: ===================Camera #2 Frame #195===================
17-03-01 08:04:50.142 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:50.192 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:50.203 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:50.306 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 200, frameCount = 201.
17-03-01 08:04:50.306 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 201
17-03-01 08:04:50.306 -08 000000095 INF: ===================Camera #0 Frame #201===================
17-03-01 08:04:50.314 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 200, frameCount = 201.
17-03-01 08:04:50.314 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 201
17-03-01 08:04:50.314 -08 000000109 INF: ===================Camera #2 Frame #201===================
17-03-01 08:04:50.328 -08 000000061 INF: Y Motor: Unshifted Position: 2404924
17-03-01 08:04:50.378 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:50.453 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:50.479 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 206, frameCount = 207.
17-03-01 08:04:50.479 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 207
17-03-01 08:04:50.479 -08 000000095 INF: ===================Camera #0 Frame #207===================
17-03-01 08:04:50.484 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 206, frameCount = 207.
17-03-01 08:04:50.484 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 207
17-03-01 08:04:50.484 -08 000000109 INF: ===================Camera #2 Frame #207===================
17-03-01 08:04:50.502 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:50.517 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:50.641 -08 000000061 INF: Y Motor: Unshifted Position: 2201255
17-03-01 08:04:50.649 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 212, frameCount = 213.
17-03-01 08:04:50.649 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 213
17-03-01 08:04:50.649 -08 000000095 INF: ===================Camera #0 Frame #213===================
17-03-01 08:04:50.654 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 212, frameCount = 213.
17-03-01 08:04:50.655 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 213
17-03-01 08:04:50.655 -08 000000109 INF: ===================Camera #2 Frame #213===================
17-03-01 08:04:50.691 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:50.767 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:50.814 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:50.817 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 218, frameCount = 219.
17-03-01 08:04:50.817 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 219
17-03-01 08:04:50.817 -08 000000095 INF: ===================Camera #0 Frame #219===================
17-03-01 08:04:50.824 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 219, frameCount = 220.
17-03-01 08:04:50.824 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 220
17-03-01 08:04:50.824 -08 000000109 INF: ===================Camera #2 Frame #220===================
17-03-01 08:04:50.825 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:50.953 -08 000000061 INF: Y Motor: Unshifted Position: 1998241
17-03-01 08:04:50.987 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 225, frameCount = 226.
17-03-01 08:04:50.987 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 226
17-03-01 08:04:50.987 -08 000000095 INF: ===================Camera #0 Frame #226===================
17-03-01 08:04:50.998 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 225, frameCount = 226.
17-03-01 08:04:50.998 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 226
17-03-01 08:04:50.998 -08 000000109 INF: ===================Camera #2 Frame #226===================
17-03-01 08:04:51.003 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:51.075 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:51.127 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:51.138 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:51.159 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 231, frameCount = 232.
17-03-01 08:04:51.159 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 232
17-03-01 08:04:51.159 -08 000000095 INF: ===================Camera #0 Frame #232===================
17-03-01 08:04:51.168 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 231, frameCount = 232.
17-03-01 08:04:51.168 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 232
17-03-01 08:04:51.168 -08 000000109 INF: ===================Camera #2 Frame #232===================
17-03-01 08:04:51.265 -08 000000061 INF: Y Motor: Unshifted Position: 1795445
17-03-01 08:04:51.315 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:51.328 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 237, frameCount = 238.
17-03-01 08:04:51.328 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 238
17-03-01 08:04:51.328 -08 000000095 INF: ===================Camera #0 Frame #238===================
17-03-01 08:04:51.338 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 238, frameCount = 239.
17-03-01 08:04:51.338 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 239
17-03-01 08:04:51.338 -08 000000109 INF: ===================Camera #2 Frame #239===================
17-03-01 08:04:51.388 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:51.440 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:51.450 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:51.498 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 244, frameCount = 245.
17-03-01 08:04:51.498 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 245
17-03-01 08:04:51.498 -08 000000095 INF: ===================Camera #0 Frame #245===================
17-03-01 08:04:51.512 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 244, frameCount = 245.
17-03-01 08:04:51.512 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 245
17-03-01 08:04:51.512 -08 000000109 INF: ===================Camera #2 Frame #245===================
17-03-01 08:04:51.575 -08 000000061 INF: Y Motor: Unshifted Position: 1593946
17-03-01 08:04:51.625 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:51.670 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 250, frameCount = 251.
17-03-01 08:04:51.670 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 251
17-03-01 08:04:51.670 -08 000000095 INF: ===================Camera #0 Frame #251===================
17-03-01 08:04:51.681 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 250, frameCount = 251.
17-03-01 08:04:51.681 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 251
17-03-01 08:04:51.681 -08 000000109 INF: ===================Camera #2 Frame #251===================
17-03-01 08:04:51.700 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:51.752 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:51.761 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:51.840 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 256, frameCount = 257.
17-03-01 08:04:51.840 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 257
17-03-01 08:04:51.840 -08 000000095 INF: ===================Camera #0 Frame #257===================
17-03-01 08:04:51.851 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 257, frameCount = 258.
17-03-01 08:04:51.851 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 258
17-03-01 08:04:51.851 -08 000000109 INF: ===================Camera #2 Frame #258===================
17-03-01 08:04:51.888 -08 000000061 INF: Y Motor: Unshifted Position: 1389619
17-03-01 08:04:51.938 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:52.009 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 262, frameCount = 263.
17-03-01 08:04:52.009 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 263
17-03-01 08:04:52.009 -08 000000095 INF: ===================Camera #0 Frame #263===================
17-03-01 08:04:52.011 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:52.024 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 263, frameCount = 264.
17-03-01 08:04:52.024 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 264
17-03-01 08:04:52.024 -08 000000109 INF: ===================Camera #2 Frame #264===================
17-03-01 08:04:52.064 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:52.074 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:52.178 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:04:52.178 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 270
17-03-01 08:04:52.178 -08 000000095 INF: ===================Camera #0 Frame #270===================
17-03-01 08:04:52.194 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:04:52.194 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 270
17-03-01 08:04:52.194 -08 000000109 INF: ===================Camera #2 Frame #270===================
17-03-01 08:04:52.201 -08 000000061 INF: Y Motor: Unshifted Position: 1188119
17-03-01 08:04:52.251 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:52.261 -08 000000135 INF: FPGA: Recv TDIYWAIT
17-03-01 08:04:52.261 -08 000000092 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:52.263 -08 000000092 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:04:52.264 -08 000000150 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:04:52.264 -08 000000105 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:04:52.264 -08 000000150 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:04:52.264 -08 000000150 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:04:52.264 -08 000000150 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:04:52.264 -08 000000150 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:04:52.264 -08 000000105 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:04:52.264 -08 000000105 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:04:52.264 -08 000000105 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:04:52.265 -08 000000105 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:04:52.324 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:52.351 -08 000000095 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:04:52.351 -08 000000095 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:04:52.351 -08 000000095 INF: ===================Camera #0 Frame #272===================
17-03-01 08:04:52.358 -08 000000095 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:04:52.359 -08 000000095 INF: ===================CameraTDI Cleanup===================
17-03-01 08:04:52.376 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:52.387 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:52.512 -08 000000061 INF: Y Motor: Unshifted Position: 994152
17-03-01 08:04:52.519 -08 000000095 INF: Camera #0 ReleaseBuffer
17-03-01 08:04:52.519 -08 000000109 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:04:52.519 -08 000000109 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:04:52.519 -08 000000109 INF: ===================Camera #2 Frame #272===================
17-03-01 08:04:52.519 -08 000000095 INF: ===================Camera TDI===================
17-03-01 08:04:52.525 -08 000000109 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:04:52.526 -08 000000109 INF: ===================CameraTDI Cleanup===================
17-03-01 08:04:52.549 -08 000000095 INF: ======================================
17-03-01 08:04:52.562 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:52.635 -08 000000148 INF: FPGA: Recv EX1MV
17-03-01 08:04:52.635 -08 000000148 INF: FPGA: Recv EX2MV
17-03-01 08:04:52.635 -08 000000105 INF: Excitation Filter 2: Moved 107 steps in 370.6612 ms
17-03-01 08:04:52.635 -08 000000105 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 370.7647 ms
17-03-01 08:04:52.635 -08 000000105 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 370.8399 ms
17-03-01 08:04:52.635 -08 000000150 INF: Excitation Filter 1: Moved 107 steps in 370.9346 ms
17-03-01 08:04:52.635 -08 000000150 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 371.1562 ms
17-03-01 08:04:52.635 -08 000000150 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 371.3303 ms
17-03-01 08:04:52.635 -08 000000105 INF: ======================================
17-03-01 08:04:52.635 -08 000000150 INF: ======================================
17-03-01 08:04:52.637 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:52.637 -08 000000092 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:52.638 -08 000000092 INF: ======================================
17-03-01 08:04:52.697 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:52.698 -08 000000061 INF: Y Motor: Unshifted Position: 992440
17-03-01 08:04:52.698 -08 000000061 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:52.698 -08 000000061 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:52.723 -08 000000109 INF: Camera #2 ReleaseBuffer
17-03-01 08:04:52.723 -08 000000109 INF: ===================Camera TDI===================
17-03-01 08:04:52.756 -08 000000109 INF: ======================================
17-03-01 08:04:52.758 -08 000000153 INF: ===================Camera TDI===================
17-03-01 08:04:52.759 -08 000000153 INF: ======================================
17-03-01 08:04:52.762 -08 000000061 INF: Y Motor: Recv v 0\r
17-03-01 08:04:52.762 -08 000000061 INF: Y Motor: Moved to 14.9244 after 7924 ms
17-03-01 08:04:52.762 -08 000000061 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:52.824 -08 000000061 INF: Y Motor: Recv v 4097\r
17-03-01 08:04:52.824 -08 000000061 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:52.824 -08 000000061 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:52.886 -08 000000061 INF: Y Motor: Recv v 0\r
17-03-01 08:04:52.886 -08 000000061 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:52.886 -08 000000061 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:52.947 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:52.952 -08 000000061 INF: Y Motor: Recv v 134217728\r
17-03-01 08:04:52.952 -08 000000061 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:04:52.952 -08 000000061 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:52.952 -08 000000061 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:53.011 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:53.012 -08 000000061 INF: Y Motor: Recv v 0\r
17-03-01 08:04:53.012 -08 000000061 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:53.012 -08 000000061 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:53.012 -08 000000061 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:53.074 -08 000000061 INF: Y Motor: Recv ok\r
17-03-01 08:04:53.074 -08 000000061 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:53.074 -08 000000061 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:53.136 -08 000000061 INF: Y Motor: Recv ok\r
17-03-01 08:04:53.136 -08 000000061 INF: ======================================
17-03-01 08:04:53.137 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:53.138 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:53.139 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.139 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:04:53.196 -08 000000031 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:04:53.196 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:53.258 -08 000000121 INF: FPGA: Recv TDIYERD 1492443
17-03-01 08:04:53.258 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:04:53.261 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:53.320 -08 000000111 INF: FPGA: Recv ZADCR 34282
17-03-01 08:04:53.320 -08 000000042 INF: At scan end Y pos = 14.924 and Z pos = -0.131. Y moved -48.539 mm
17-03-01 08:04:53.320 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:04:53.322 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:53.384 -08 000000113 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:04:53.384 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:04:53.384 -08 000000042 INF: TDIScan finished after 12832.4535 ms
17-03-01 08:04:53.384 -08 000000042 INF: Image[0]: Y should trigger at 63.464 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:04:53.384 -08 000000042 INF: Image[2]: Y should trigger at 63.464 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:04:53.386 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.420 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.654 um
17-03-01 08:04:53.421 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.421 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:04:53.446 -08 000000082 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:04:53.447 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.447 -08 000000036 INF: ===================Dither Clean Up Command===================
17-03-01 08:04:53.447 -08 000000009 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:04:53.447 -08 000000084 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:04:53.447 -08 000000094 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:04:53.448 -08 000000094 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:04:53.448 -08 000000094 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:04:53.448 -08 000000009 INF: ======================================
17-03-01 08:04:53.448 -08 000000084 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:04:53.448 -08 000000084 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:04:53.448 -08 000000124 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:04:53.448 -08 000000105 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:53.449 -08 000000124 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:04:53.453 -08 000000105 INF: ===================LFT:Extracting coords===================
17-03-01 08:04:53.480 -08 000000105 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:53.481 -08 000000105 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:04:53.482 -08 000000140 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.482 -08 000000087 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.482 -08 000000071 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.482 -08 000000131 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.482 -08 000000140 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:53.482 -08 000000087 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:53.482 -08 000000131 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:53.483 -08 000000071 INF: ===================Lookup Focus Tracking===================
17-03-01 08:04:53.511 -08 000000153 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:53.511 -08 000000153 INF: FPGA: Recv ZSEL 
17-03-01 08:04:53.511 -08 000000124 INF: FPGA: Xmit ZDACW 40010\n
17-03-01 08:04:53.511 -08 000000094 INF: ======================================
17-03-01 08:04:53.512 -08 000000084 INF: Y Motor: Recv ok\r
17-03-01 08:04:53.512 -08 000000084 INF: ======================================
17-03-01 08:04:53.556 -08 000000140 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:53.557 -08 000000087 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:53.557 -08 000000131 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:53.557 -08 000000071 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:04:53.572 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:53.572 -08 000000133 INF: FPGA: Recv ZDACW 
17-03-01 08:04:53.573 -08 000000124 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:04:53.573 -08 000000124 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:04:53.633 -08 000000095 INF: FPGA: Recv TDIBB
17-03-01 08:04:53.633 -08 000000124 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:04:53.634 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:53.634 -08 000000124 INF: ======================================
17-03-01 08:04:53.708 -08 000000140 INF: LFT found best fwhm score 2.00006 in 151 ms
17-03-01 08:04:53.708 -08 000000140 INF: LFT found good score at index 385 with fwhm value 2.00006. Next cycle, cycle 53 starting Z position for top surface is at -0.153 mm FC:B, C:52,L:2,T
17-03-01 08:04:53.708 -08 000000087 INF: LFT found best fwhm score 2.000166 in 151 ms
17-03-01 08:04:53.708 -08 000000087 INF: LFT found good score at index 289 with fwhm value 2.000166. Next cycle, cycle 53 starting Z position for top surface is at -0.153 mm FC:B, C:52,L:2,T
17-03-01 08:04:53.708 -08 000000140 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.708 -08 000000087 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.708 -08 000000131 INF: LFT found best fwhm score 2.151621 in 151 ms
17-03-01 08:04:53.708 -08 000000131 INF: LFT found good score at index 2521 with fwhm value 2.151621. Next cycle, cycle 53 starting Z position for top surface is at -0.153 mm FC:B, C:52,L:2,T
17-03-01 08:04:53.708 -08 000000071 INF: LFT found best fwhm score 2.000021 in 151 ms
17-03-01 08:04:53.708 -08 000000071 INF: LFT found good score at index 4745 with fwhm value 2.000021. Next cycle, cycle 53 starting Z position for top surface is at -0.152 mm FC:B, C:52,L:2,T
17-03-01 08:04:53.708 -08 000000131 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.708 -08 000000087 INF: ======================================
17-03-01 08:04:53.709 -08 000000071 INF: ===================LookupFocusTracking===================
17-03-01 08:04:53.709 -08 000000140 INF: ======================================
17-03-01 08:04:53.709 -08 000000131 INF: ======================================
17-03-01 08:04:53.709 -08 000000071 INF: ======================================
17-03-01 08:04:53.710 -08 000000105 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:04:53.711 -08 000000105 INF: LFT weighted average best Z for top surface is at -0.153mm FC:B, C:52,L:2,T
17-03-01 08:04:53.711 -08 000000105 INF: ======================================
17-03-01 08:04:53.713 -08 000000036 INF: ======================================
17-03-01 08:04:53.714 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.715 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:04:53.715 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.715 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:04:53.715 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.715 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:04:53.716 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.716 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:04:53.716 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.716 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308===================
17-03-01 08:04:53.716 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308===================
17-03-01 08:04:53.717 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Aspirating port PortB, Waiting for image analysis===================
17-03-01 08:04:53.717 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Aspirating port PortB===================
17-03-01 08:04:53.717 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:04:53.717 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 1 - X = 71.39664 Y = 39.76308===================
17-03-01 08:04:53.740 -08 000000042 INF: Waited 23 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 1, buffer wait time 0
17-03-01 08:04:53.741 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:04:53.741 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308===================
17-03-01 08:04:53.741 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:53.741 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308===================
17-03-01 08:04:53.741 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:04:53.742 -08 000000042 INF: Transformed XStagePosition from 72.50464 mm to 72.4766936711967 mm.
17-03-01 08:04:53.787 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5720643562973 mm.
17-03-01 08:04:53.787 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3720643562973 mm.
17-03-01 08:04:53.788 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4628143562973 mm.
17-03-01 08:04:53.793 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.793 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:04:53.794 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:53.794 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -152.6 um, section = B_1
17-03-01 08:04:53.797 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:53.798 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:53.819 -08 000000121 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1102 Request: {"Cycle":52,"Lane":2,"Tile":1102,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF233","HCSMMF245","HCSMMF286","HCSMMF266"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.820 -08 000000130 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:53.820 -08 000000023 INF: ===================Move X,Y===================
17-03-01 08:04:53.820 -08 000000130 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:04:53.821 -08 000000130 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:04:53.821 -08 000000130 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:53.822 -08 000000023 INF: ===================Move X,Y, Parallel===================
17-03-01 08:04:53.822 -08 000000130 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:04:53.824 -08 000000133 INF: ===================Move X Motor without settling===================
17-03-01 08:04:53.824 -08 000000133 INF: X Motor: Xmit PR VM\n
17-03-01 08:04:53.828 -08 000000035 INF: ===================TDI Scan Setup===================
17-03-01 08:04:53.829 -08 000000035 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:53.829 -08 000000035 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:53.830 -08 000000119 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:53.830 -08 000000035 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:53.830 -08 000000119 INF: Y Motor: Moving to 64.5721 mm @25.000 mm/sec, started at 14.9244 mm
17-03-01 08:04:53.830 -08 000000104 INF: ===================Camera Arm TDI===================
17-03-01 08:04:53.831 -08 000000035 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:04:53.831 -08 000000119 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:53.831 -08 000000119 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:53.833 -08 000000104 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:53.835 -08 000000104 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:53.877 -08 000000046 INF: ===================MoveEmissionFilters===================
17-03-01 08:04:53.883 -08 000000082 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:53.883 -08 000000071 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:53.884 -08 000000082 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:53.885 -08 000000071 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:53.885 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:53.887 -08 000000031 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:53.887 -08 000000063 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:04:53.888 -08 000000031 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:04:53.888 -08 000000153 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:04:53.888 -08 000000063 INF: ======================================
17-03-01 08:04:53.888 -08 000000153 INF: ======================================
17-03-01 08:04:53.889 -08 000000063 INF: FPGA: Recv ZSEL 
17-03-01 08:04:53.890 -08 000000153 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:04:53.891 -08 000000153 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:04:53.891 -08 000000063 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:53.891 -08 000000153 INF: ======================================
17-03-01 08:04:53.891 -08 000000035 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:53.892 -08 000000035 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:04:53.892 -08 000000063 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:04:53.892 -08 000000124 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:04:53.892 -08 000000144 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:04:53.893 -08 000000071 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:04:53.893 -08 000000153 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:04:53.894 -08 000000153 INF: ======================================
17-03-01 08:04:53.894 -08 000000144 INF: ======================================
17-03-01 08:04:53.894 -08 000000124 INF: ======================================
17-03-01 08:04:53.896 -08 000000071 INF: ======================================
17-03-01 08:04:53.896 -08 000000133 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:04:53.896 -08 000000133 INF: X Motor: Xmit PR VI\n
17-03-01 08:04:53.897 -08 000000082 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:04:53.898 -08 000000031 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:04:53.898 -08 000000124 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:04:53.898 -08 000000082 INF: ======================================
17-03-01 08:04:53.899 -08 000000151 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:04:53.899 -08 000000124 INF: ======================================
17-03-01 08:04:53.900 -08 000000151 INF: ======================================
17-03-01 08:04:53.901 -08 000000031 INF: ======================================
17-03-01 08:04:53.904 -08 000000063 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:04:53.905 -08 000000063 INF: ======================================
17-03-01 08:04:53.907 -08 000000046 INF: ======================================
17-03-01 08:04:53.942 -08 000000131 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1109 Request: {"Cycle":52,"Lane":2,"Tile":1109,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF217","HCSMMF182","HCSMMF187","HCSMMF179"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.944 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1101 Request: {"Cycle":52,"Lane":2,"Tile":1101,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF189","HCSMMF273","HCSMMF269"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.945 -08 000000094 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1108 Request: {"Cycle":52,"Lane":2,"Tile":1108,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF231","HCSMMF227","HCSMMF221","HCSMMF256"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.945 -08 000000111 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1112 Request: {"Cycle":52,"Lane":2,"Tile":1112,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF192","HCSMMF190","HCSMMF243","HCSMMF272"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.946 -08 000000105 INF: FPGA: Recv TDIBB
17-03-01 08:04:53.946 -08 000000035 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:04:53.947 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:53.947 -08 000000080 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1116 Request: {"Cycle":52,"Lane":2,"Tile":1116,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF229","HCSMMF215","HCSMMF196","HCSMMF176"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.948 -08 000000133 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:04:53.948 -08 000000035 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:04:53.948 -08 000000133 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:04:53.948 -08 000000133 INF: X Motor: Moving to 72.4767 mm @15.000 mm/sec, started at 71.3706 mm
17-03-01 08:04:53.948 -08 000000133 INF: X Motor: Xmit MA 5520\n
17-03-01 08:04:53.948 -08 000000035 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:53.948 -08 000000154 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1110 Request: {"Cycle":52,"Lane":2,"Tile":1110,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF197","HCSMMF277","HCSMMF225","HCSMMF198"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.949 -08 000000065 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1111 Request: {"Cycle":52,"Lane":2,"Tile":1111,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF235","HCSMMF183","HCSMMF276","HCSMMF204"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.950 -08 000000035 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:04:53.950 -08 000000035 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:04:53.950 -08 000000035 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:04:53.950 -08 000000004 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1120 Request: {"Cycle":52,"Lane":2,"Tile":1120,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF265","HCSMMF254","HCSMMF263","HCSMMF212"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.951 -08 000000146 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1107 Request: {"Cycle":52,"Lane":2,"Tile":1107,"Channels":["G","C","T","A"],"MemoryMappedFileNames":["HCSMMF257","HCSMMF255","HCSMMF239","HCSMMF216"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.952 -08 000000097 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1114 Request: {"Cycle":52,"Lane":2,"Tile":1114,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF194","HCSMMF222","HCSMMF177","HCSMMF283"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.953 -08 000000093 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1117 Request: {"Cycle":52,"Lane":2,"Tile":1117,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF207","HCSMMF214","HCSMMF268","HCSMMF218"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.953 -08 000000095 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1115 Request: {"Cycle":52,"Lane":2,"Tile":1115,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF279","HCSMMF241","HCSMMF242","HCSMMF284"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.956 -08 000000109 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1118 Request: {"Cycle":52,"Lane":2,"Tile":1118,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF278","HCSMMF246","HCSMMF180","HCSMMF178"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.956 -08 000000059 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1104 Request: {"Cycle":52,"Lane":2,"Tile":1104,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF248","HCSMMF280","HCSMMF213","HCSMMF285"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.957 -08 000000064 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1121 Request: {"Cycle":52,"Lane":2,"Tile":1121,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF195","HCSMMF282","HCSMMF201","HCSMMF188"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.958 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1113 Request: {"Cycle":52,"Lane":2,"Tile":1113,"Channels":["G","C","T","A"],"MemoryMappedFileNames":["HCSMMF230","HCSMMF193","HCSMMF261","HCSMMF238"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.959 -08 000000122 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1106 Request: {"Cycle":52,"Lane":2,"Tile":1106,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF232","HCSMMF251","HCSMMF203","HCSMMF281"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.960 -08 000000036 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1122 Request: {"Cycle":52,"Lane":2,"Tile":1122,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF211","HCSMMF271","HCSMMF209","HCSMMF223"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.960 -08 000000060 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1103 Request: {"Cycle":52,"Lane":2,"Tile":1103,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF253","HCSMMF267","HCSMMF252","HCSMMF262"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.962 -08 000000118 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1125 Request: {"Cycle":52,"Lane":2,"Tile":1125,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF240","HCSMMF260","HCSMMF181","HCSMMF185"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.963 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:53.963 -08 000000119 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:53.963 -08 000000119 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:53.963 -08 000000108 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1123 Request: {"Cycle":52,"Lane":2,"Tile":1123,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF249","HCSMMF224","HCSMMF275","HCSMMF274"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.964 -08 000000145 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1119 Request: {"Cycle":52,"Lane":2,"Tile":1119,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF210","HCSMMF259","HCSMMF219","HCSMMF234"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.965 -08 000000140 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1124 Request: {"Cycle":52,"Lane":2,"Tile":1124,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF237","HCSMMF250","HCSMMF202","HCSMMF208"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.966 -08 000000125 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1128 Request: {"Cycle":52,"Lane":2,"Tile":1128,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF200","HCSMMF199","HCSMMF205","HCSMMF184"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.969 -08 000000107 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1126 Request: {"Cycle":52,"Lane":2,"Tile":1126,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF258","HCSMMF247","HCSMMF191","HCSMMF228"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.969 -08 000000061 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1105 Request: {"Cycle":52,"Lane":2,"Tile":1105,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF220","HCSMMF270","HCSMMF186","HCSMMF236"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.970 -08 000000068 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1127 Request: {"Cycle":52,"Lane":2,"Tile":1127,"Channels":["C","T","A","G"],"MemoryMappedFileNames":["HCSMMF226","HCSMMF206","HCSMMF287","HCSMMF244"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:04:53.988 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:53.995 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:04:54.007 -08 000000020 INF: FPGA: Recv ZSTEP 
17-03-01 08:04:54.007 -08 000000035 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:54.009 -08 000000133 INF: X Motor: Recv MA 5520\r\n>
17-03-01 08:04:54.009 -08 000000133 INF: X Motor: WaitUntilStopped 60074
17-03-01 08:04:54.009 -08 000000035 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:04:54.009 -08 000000035 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:54.011 -08 000000035 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:04:54.011 -08 000000035 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:04:54.011 -08 000000035 INF: Z Motor: Arming to move to -0.1126 mm
17-03-01 08:04:54.011 -08 000000035 INF: FPGA: Xmit ZYT 6437206 4\n
17-03-01 08:04:54.025 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:54.025 -08 000000119 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:54.069 -08 000000092 INF: FPGA: Recv ZYT 
17-03-01 08:04:54.069 -08 000000035 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492440 enc / 14.924 mm / ) = 6437206 enc / 64.372 mm
17-03-01 08:04:54.069 -08 000000035 INF: FPGA: Xmit ZARM 29524\n
17-03-01 08:04:54.085 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:54.085 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:04:54.089 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:54.089 -08 000000119 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:54.089 -08 000000119 INF: Y Motor: Set target position to 5957206 encoder counts
17-03-01 08:04:54.089 -08 000000119 INF: Y Motor: Xmit s r0xca 5957206\r
17-03-01 08:04:54.134 -08 000000144 INF: FPGA: Recv ZARM
17-03-01 08:04:54.134 -08 000000035 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 65.1358 ms
17-03-01 08:04:54.134 -08 000000035 INF: Z Motor: ArmAbsStepped took 123.1461 ms
17-03-01 08:04:54.135 -08 000000035 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:04:54.136 -08 000000035 INF: ===================TDI Scan Setup===================
17-03-01 08:04:54.138 -08 000000035 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:04:54.138 -08 000000035 INF: ===================TDI Scan Setup===================
17-03-01 08:04:54.139 -08 000000035 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:04:54.140 -08 000000035 INF: ===================TDI Scan Setup===================
17-03-01 08:04:54.141 -08 000000035 INF: ======================================
17-03-01 08:04:54.147 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:54.151 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:54.151 -08 000000119 INF: Y Motor: Start the move command
17-03-01 08:04:54.151 -08 000000119 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:54.152 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:04:54.197 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:54.212 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:54.212 -08 000000119 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:04:54.212 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:54.257 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:54.335 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:54.338 -08 000000119 INF: Y Motor: Unshifted Position: 1075220
17-03-01 08:04:54.341 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:04:54.388 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:54.433 -08 000000104 INF: Camera #0 AttachBuffer (imageDataPtr = 60599242800 imgPtr = 60599242800 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:54.433 -08 000000104 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:54.433 -08 000000104 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:54.443 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:54.448 -08 000000104 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:54.449 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:04:54.450 -08 000000104 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:04:54.507 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:54.513 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:54.546 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:04:54.572 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:54.635 -08 000000133 INF: X Motor: Xmit PR ER\n
17-03-01 08:04:54.651 -08 000000119 INF: Y Motor: Unshifted Position: 1777433
17-03-01 08:04:54.697 -08 000000133 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:04:54.697 -08 000000133 INF: X Motor: Moved to 72.4766 after 688 ms
17-03-01 08:04:54.697 -08 000000133 INF: ======================================
17-03-01 08:04:54.701 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:54.822 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:54.825 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:54.832 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:04:54.883 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:54.963 -08 000000119 INF: Y Motor: Unshifted Position: 2557459
17-03-01 08:04:55.013 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:55.059 -08 000000104 INF: Camera #2 AttachBuffer (imageDataPtr = 62411182128 imgPtr = 63317151792 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:04:55.059 -08 000000104 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:04:55.059 -08 000000104 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:04:55.075 -08 000000104 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:04:55.077 -08 000000104 INF: ===================Camera Arm TDI===================
17-03-01 08:04:55.079 -08 000000104 INF: ======================================
17-03-01 08:04:55.081 -08 000000130 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:04:55.082 -08 000000130 INF: ======================================
17-03-01 08:04:55.133 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:55.136 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:55.195 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:55.273 -08 000000119 INF: Y Motor: Unshifted Position: 3340739
17-03-01 08:04:55.323 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:55.445 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:55.449 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:55.506 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:55.586 -08 000000119 INF: Y Motor: Unshifted Position: 4118314
17-03-01 08:04:55.636 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:55.756 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:55.761 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:55.819 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:55.897 -08 000000119 INF: Y Motor: Unshifted Position: 4900745
17-03-01 08:04:55.947 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:56.069 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:56.072 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:56.130 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:56.211 -08 000000119 INF: Y Motor: Unshifted Position: 5677960
17-03-01 08:04:56.261 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:56.380 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:56.384 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:56.444 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:04:56.522 -08 000000119 INF: Y Motor: Unshifted Position: 5957207
17-03-01 08:04:56.522 -08 000000119 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:04:56.522 -08 000000119 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:56.585 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:56.585 -08 000000119 INF: Y Motor: Moved to 64.5721 after 2373 ms
17-03-01 08:04:56.585 -08 000000119 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:04:56.647 -08 000000119 INF: Y Motor: Recv v 4096\r
17-03-01 08:04:56.647 -08 000000119 INF: Y Motor: Status After move finished OK:
17-03-01 08:04:56.647 -08 000000119 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:56.694 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:04:56.708 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:56.708 -08 000000119 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:56.708 -08 000000119 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:04:56.754 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:04:56.754 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:56.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:56.755 -08 000000018 INF: WaitCommand(5000) start
17-03-01 08:04:56.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Delay 5 of 5 seconds left===================
17-03-01 08:04:56.770 -08 000000119 INF: Y Motor: Recv v 402653184\r
17-03-01 08:04:56.770 -08 000000119 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:04:56.770 -08 000000119 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:04:56.770 -08 000000119 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:04:56.835 -08 000000119 INF: Y Motor: Recv v 0\r
17-03-01 08:04:56.835 -08 000000119 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:04:56.835 -08 000000119 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:04:56.835 -08 000000119 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:56.896 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:56.896 -08 000000119 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:04:56.896 -08 000000119 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:56.958 -08 000000119 INF: Y Motor: Recv ok\r
17-03-01 08:04:56.958 -08 000000119 INF: ======================================
17-03-01 08:04:56.959 -08 000000023 INF: ===================Move X,Y===================
17-03-01 08:04:56.961 -08 000000023 INF: ======================================
17-03-01 08:04:56.962 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:04:56.962 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:56.962 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:04:56.962 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:04:57.019 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:04:57.019 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:04:57.064 -08 000000040 INF: FPGA: Recv ZFREQCL
17-03-01 08:04:57.064 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:04:57.065 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:57.065 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:04:57.128 -08 000000023 INF: FPGA: Recv TDIYERD 6457207
17-03-01 08:04:57.128 -08 000000042 INF: Before scan, Y encoder from FPGA = 6457207 counts (64.572 mm)
17-03-01 08:04:57.129 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:57.129 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:57.130 -08 000000140 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:57.130 -08 000000133 INF: ===================Set YMotor gains for scans===================
17-03-01 08:04:57.131 -08 000000140 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:57.131 -08 000000133 INF: ======================================
17-03-01 08:04:57.131 -08 000000140 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:04:57.131 -08 000000140 INF: FPGA: Xmit TDIYPOS 6346281\n
17-03-01 08:04:57.190 -08 000000109 INF: FPGA: Recv TDIYPOS
17-03-01 08:04:57.190 -08 000000140 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:57.192 -08 000000140 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:04:57.192 -08 000000140 INF: FPGA: Xmit TDIYARM3 139264 6437206 1 1\n
17-03-01 08:04:57.252 -08 000000108 INF: FPGA: Recv TDIYARM3
17-03-01 08:04:57.252 -08 000000140 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:04:57.253 -08 000000140 INF: ===================TDI FPGA Arm===================
17-03-01 08:04:57.254 -08 000000140 INF: ======================================
17-03-01 08:04:57.255 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:04:57.256 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:04:57.256 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:57.257 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:57.257 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:57.258 -08 000000068 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:04:57.258 -08 000000133 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:04:57.258 -08 000000068 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:04:57.258 -08 000000068 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:04:57.259 -08 000000068 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:04:57.259 -08 000000133 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:04:57.259 -08 000000133 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:04:57.259 -08 000000133 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:04:57.259 -08 000000068 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:04:57.260 -08 000000133 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:04:57.628 -08 000000095 INF: FPGA: Recv EX1MV
17-03-01 08:04:57.628 -08 000000095 INF: FPGA: Recv EX2MV
17-03-01 08:04:57.628 -08 000000133 INF: Excitation Filter 2: Moved -107 steps in 369.3329 ms
17-03-01 08:04:57.628 -08 000000133 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 369.5086 ms
17-03-01 08:04:57.631 -08 000000133 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 372.104 ms
17-03-01 08:04:57.631 -08 000000133 INF: ======================================
17-03-01 08:04:57.632 -08 000000068 INF: Excitation Filter 1: Moved -107 steps in 370.6205 ms
17-03-01 08:04:57.632 -08 000000068 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 373.5904 ms
17-03-01 08:04:57.632 -08 000000068 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 373.6759 ms
17-03-01 08:04:57.632 -08 000000068 INF: ======================================
17-03-01 08:04:57.633 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:57.635 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:04:57.636 -08 000000094 INF: ===================Camera TDI===================
17-03-01 08:04:57.636 -08 000000153 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:04:57.636 -08 000000087 INF: ===================Move Y Motor without settling===================
17-03-01 08:04:57.636 -08 000000097 INF: ===================FPGA Z Wait===================
17-03-01 08:04:57.637 -08 000000094 INF: ===================Camera TDI, Parallel===================
17-03-01 08:04:57.637 -08 000000153 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:04:57.646 -08 000000097 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:04:57.647 -08 000000087 INF: Y Motor: Moving to 14.9237 mm @6.500 mm/sec, started at 64.5721 mm
17-03-01 08:04:57.647 -08 000000087 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:04:57.647 -08 000000087 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:04:57.648 -08 000000130 INF: ===================Camera TDI===================
17-03-01 08:04:57.648 -08 000000121 INF: ===================Camera TDI===================
17-03-01 08:04:57.649 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:57.649 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:57.650 -08 000000153 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:04:57.652 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:57.652 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:57.713 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:04:57.713 -08 000000087 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:04:57.713 -08 000000087 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:04:57.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:57.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Delay 4 of 5 seconds left===================
17-03-01 08:04:57.768 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:04:57.768 -08 000000087 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:04:57.800 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:57.800 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:57.803 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:57.803 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:57.833 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:04:57.833 -08 000000087 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:04:57.833 -08 000000087 INF: Y Motor: Set target position to 992373 encoder counts
17-03-01 08:04:57.833 -08 000000087 INF: Y Motor: Xmit s r0xca 992373\r
17-03-01 08:04:57.893 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:04:57.893 -08 000000087 INF: Y Motor: Start the move command
17-03-01 08:04:57.893 -08 000000087 INF: Y Motor: Xmit t 1\r
17-03-01 08:04:57.953 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:57.953 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:57.953 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:04:57.953 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:04:57.957 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:04:57.957 -08 000000087 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:04:57.957 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.065 -08 000000036 INF: FPGA: Recv ZWAIT 
17-03-01 08:04:58.065 -08 000000097 INF: ======================================
17-03-01 08:04:58.083 -08 000000087 INF: Y Motor: Unshifted Position: 5892104
17-03-01 08:04:58.103 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:04:58.103 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:04:58.103 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:04:58.103 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:04:58.103 -08 000000130 INF: ===================Camera #0 Frame #5===================
17-03-01 08:04:58.103 -08 000000121 INF: ===================Camera #2 Frame #5===================
17-03-01 08:04:58.134 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.257 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.268 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:04:58.268 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:04:58.268 -08 000000130 INF: ===================Camera #0 Frame #11===================
17-03-01 08:04:58.269 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:04:58.269 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:04:58.269 -08 000000121 INF: ===================Camera #2 Frame #11===================
17-03-01 08:04:58.395 -08 000000087 INF: Y Motor: Unshifted Position: 5691685
17-03-01 08:04:58.444 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:04:58.444 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:04:58.444 -08 000000130 INF: ===================Camera #0 Frame #17===================
17-03-01 08:04:58.445 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.446 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:04:58.446 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:04:58.446 -08 000000121 INF: ===================Camera #2 Frame #17===================
17-03-01 08:04:58.568 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.612 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 22, frameCount = 23.
17-03-01 08:04:58.612 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 23
17-03-01 08:04:58.612 -08 000000130 INF: ===================Camera #0 Frame #23===================
17-03-01 08:04:58.620 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:04:58.620 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:04:58.620 -08 000000121 INF: ===================Camera #2 Frame #24===================
17-03-01 08:04:58.706 -08 000000087 INF: Y Motor: Unshifted Position: 5487587
17-03-01 08:04:58.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:58.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Delay 3 of 5 seconds left===================
17-03-01 08:04:58.756 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.788 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:04:58.788 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:04:58.788 -08 000000130 INF: ===================Camera #0 Frame #30===================
17-03-01 08:04:58.801 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:04:58.801 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:04:58.801 -08 000000121 INF: ===================Camera #2 Frame #30===================
17-03-01 08:04:58.879 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:58.967 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:04:58.967 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:04:58.967 -08 000000130 INF: ===================Camera #0 Frame #37===================
17-03-01 08:04:58.974 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:04:58.974 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:04:58.974 -08 000000121 INF: ===================Camera #2 Frame #37===================
17-03-01 08:04:59.017 -08 000000087 INF: Y Motor: Unshifted Position: 5285433
17-03-01 08:04:59.067 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:59.147 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:04:59.147 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:04:59.147 -08 000000130 INF: ===================Camera #0 Frame #43===================
17-03-01 08:04:59.156 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:04:59.156 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:04:59.156 -08 000000121 INF: ===================Camera #2 Frame #43===================
17-03-01 08:04:59.193 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:59.323 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:04:59.323 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:04:59.323 -08 000000130 INF: ===================Camera #0 Frame #50===================
17-03-01 08:04:59.328 -08 000000087 INF: Y Motor: Unshifted Position: 5083069
17-03-01 08:04:59.335 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:04:59.335 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:04:59.335 -08 000000121 INF: ===================Camera #2 Frame #50===================
17-03-01 08:04:59.378 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:59.494 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:04:59.494 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:04:59.494 -08 000000130 INF: ===================Camera #0 Frame #56===================
17-03-01 08:04:59.504 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:59.508 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:04:59.508 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:04:59.508 -08 000000121 INF: ===================Camera #2 Frame #56===================
17-03-01 08:04:59.642 -08 000000087 INF: Y Motor: Unshifted Position: 4878969
17-03-01 08:04:59.663 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:04:59.663 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:04:59.663 -08 000000130 INF: ===================Camera #0 Frame #62===================
17-03-01 08:04:59.678 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 62, frameCount = 63.
17-03-01 08:04:59.678 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 63
17-03-01 08:04:59.678 -08 000000121 INF: ===================Camera #2 Frame #63===================
17-03-01 08:04:59.692 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:59.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:04:59.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Delay 2 of 5 seconds left===================
17-03-01 08:04:59.815 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:04:59.831 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:04:59.831 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:04:59.831 -08 000000130 INF: ===================Camera #0 Frame #68===================
17-03-01 08:04:59.850 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 68, frameCount = 69.
17-03-01 08:04:59.850 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 69
17-03-01 08:04:59.850 -08 000000121 INF: ===================Camera #2 Frame #69===================
17-03-01 08:04:59.953 -08 000000087 INF: Y Motor: Unshifted Position: 4676606
17-03-01 08:04:59.999 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:04:59.999 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:04:59.999 -08 000000130 INF: ===================Camera #0 Frame #75===================
17-03-01 08:05:00.003 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:00.020 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:05:00.020 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:05:00.020 -08 000000121 INF: ===================Camera #2 Frame #75===================
17-03-01 08:05:00.129 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:00.170 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:05:00.170 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:05:00.170 -08 000000130 INF: ===================Camera #0 Frame #81===================
17-03-01 08:05:00.190 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 81, frameCount = 82.
17-03-01 08:05:00.190 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 82
17-03-01 08:05:00.190 -08 000000121 INF: ===================Camera #2 Frame #82===================
17-03-01 08:05:00.266 -08 000000087 INF: Y Motor: Unshifted Position: 4471624
17-03-01 08:05:00.316 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:00.339 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:00.339 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:00.339 -08 000000130 INF: ===================Camera #0 Frame #87===================
17-03-01 08:05:00.362 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 87, frameCount = 88.
17-03-01 08:05:00.362 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 88
17-03-01 08:05:00.362 -08 000000121 INF: ===================Camera #2 Frame #88===================
17-03-01 08:05:00.439 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:00.507 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:00.507 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:00.507 -08 000000130 INF: ===================Camera #0 Frame #93===================
17-03-01 08:05:00.531 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 93, frameCount = 94.
17-03-01 08:05:00.531 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 94
17-03-01 08:05:00.531 -08 000000121 INF: ===================Camera #2 Frame #94===================
17-03-01 08:05:00.577 -08 000000087 INF: Y Motor: Unshifted Position: 4270564
17-03-01 08:05:00.627 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:00.675 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 98, frameCount = 99.
17-03-01 08:05:00.675 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 99
17-03-01 08:05:00.675 -08 000000130 INF: ===================Camera #0 Frame #99===================
17-03-01 08:05:00.701 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:05:00.701 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:05:00.701 -08 000000121 INF: ===================Camera #2 Frame #100===================
17-03-01 08:05:00.753 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:00.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:05:00.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Delay 1 of 5 seconds left===================
17-03-01 08:05:00.843 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 105, frameCount = 106.
17-03-01 08:05:00.843 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 106
17-03-01 08:05:00.843 -08 000000130 INF: ===================Camera #0 Frame #106===================
17-03-01 08:05:00.870 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 106, frameCount = 107.
17-03-01 08:05:00.870 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 107
17-03-01 08:05:00.870 -08 000000121 INF: ===================Camera #2 Frame #107===================
17-03-01 08:05:00.888 -08 000000087 INF: Y Motor: Unshifted Position: 4068404
17-03-01 08:05:00.938 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.014 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 111, frameCount = 112.
17-03-01 08:05:01.014 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 112
17-03-01 08:05:01.014 -08 000000130 INF: ===================Camera #0 Frame #112===================
17-03-01 08:05:01.042 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 112, frameCount = 113.
17-03-01 08:05:01.042 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 113
17-03-01 08:05:01.042 -08 000000121 INF: ===================Camera #2 Frame #113===================
17-03-01 08:05:01.064 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.183 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:01.183 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:01.183 -08 000000130 INF: ===================Camera #0 Frame #118===================
17-03-01 08:05:01.202 -08 000000087 INF: Y Motor: Unshifted Position: 3864308
17-03-01 08:05:01.211 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 118, frameCount = 119.
17-03-01 08:05:01.211 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 119
17-03-01 08:05:01.211 -08 000000121 INF: ===================Camera #2 Frame #119===================
17-03-01 08:05:01.252 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.351 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 123, frameCount = 124.
17-03-01 08:05:01.351 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 124
17-03-01 08:05:01.351 -08 000000130 INF: ===================Camera #0 Frame #124===================
17-03-01 08:05:01.375 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.380 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 124, frameCount = 125.
17-03-01 08:05:01.380 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 125
17-03-01 08:05:01.380 -08 000000121 INF: ===================Camera #2 Frame #125===================
17-03-01 08:05:01.513 -08 000000087 INF: Y Motor: Unshifted Position: 3661935
17-03-01 08:05:01.519 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 129, frameCount = 130.
17-03-01 08:05:01.519 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 130
17-03-01 08:05:01.519 -08 000000130 INF: ===================Camera #0 Frame #130===================
17-03-01 08:05:01.549 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 131, frameCount = 132.
17-03-01 08:05:01.549 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 132
17-03-01 08:05:01.549 -08 000000121 INF: ===================Camera #2 Frame #132===================
17-03-01 08:05:01.563 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.687 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 136, frameCount = 137.
17-03-01 08:05:01.687 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 137
17-03-01 08:05:01.687 -08 000000130 INF: ===================Camera #0 Frame #137===================
17-03-01 08:05:01.689 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.721 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 137, frameCount = 138.
17-03-01 08:05:01.721 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 138
17-03-01 08:05:01.721 -08 000000121 INF: ===================Camera #2 Frame #138===================
17-03-01 08:05:01.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:05:01.755 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Delay 0 of 5 seconds left===================
17-03-01 08:05:01.756 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:05:01.756 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:05:01.756 -08 000000018 INF: WaitCommand(5000) end
17-03-01 08:05:01.756 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:05:01.824 -08 000000087 INF: Y Motor: Unshifted Position: 3459788
17-03-01 08:05:01.854 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:01.858 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 142, frameCount = 143.
17-03-01 08:05:01.858 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 143
17-03-01 08:05:01.858 -08 000000130 INF: ===================Camera #0 Frame #143===================
17-03-01 08:05:01.874 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:01.890 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 143, frameCount = 144.
17-03-01 08:05:01.890 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 144
17-03-01 08:05:01.890 -08 000000121 INF: ===================Camera #2 Frame #144===================
17-03-01 08:05:01.934 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`11904 (0x03)\r\n(0xFF)
17-03-01 08:05:01.934 -08 000000018 INF: Current Position of Pump is: 11904
17-03-01 08:05:02.000 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:02.026 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 148, frameCount = 149.
17-03-01 08:05:02.026 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 149
17-03-01 08:05:02.026 -08 000000130 INF: ===================Camera #0 Frame #149===================
17-03-01 08:05:02.034 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:02.059 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 149, frameCount = 150.
17-03-01 08:05:02.059 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 150
17-03-01 08:05:02.059 -08 000000121 INF: ===================Camera #2 Frame #150===================
17-03-01 08:05:02.121 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`11904 (0x03)\r\n(0xFF)
17-03-01 08:05:02.121 -08 000000018 INF: Current Position of Pump is: 11904
17-03-01 08:05:02.121 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7), Dispensing port PortC===================
17-03-01 08:05:02.137 -08 000000087 INF: Y Motor: Unshifted Position: 3255478
17-03-01 08:05:02.187 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:02.194 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 154, frameCount = 155.
17-03-01 08:05:02.194 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 155
17-03-01 08:05:02.194 -08 000000130 INF: ===================Camera #0 Frame #155===================
17-03-01 08:05:02.221 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V8000OD11904R\r
17-03-01 08:05:02.228 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 156, frameCount = 157.
17-03-01 08:05:02.228 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 157
17-03-01 08:05:02.228 -08 000000121 INF: ===================Camera #2 Frame #157===================
17-03-01 08:05:02.309 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:02.311 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:02.362 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 161, frameCount = 162.
17-03-01 08:05:02.362 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 162
17-03-01 08:05:02.362 -08 000000130 INF: ===================Camera #0 Frame #162===================
17-03-01 08:05:02.401 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 162, frameCount = 163.
17-03-01 08:05:02.401 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 163
17-03-01 08:05:02.401 -08 000000121 INF: ===================Camera #2 Frame #163===================
17-03-01 08:05:02.409 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:02.448 -08 000000087 INF: Y Motor: Unshifted Position: 3053333
17-03-01 08:05:02.494 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:02.498 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:02.533 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 167, frameCount = 168.
17-03-01 08:05:02.533 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 168
17-03-01 08:05:02.533 -08 000000130 INF: ===================Camera #0 Frame #168===================
17-03-01 08:05:02.571 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:05:02.571 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:05:02.571 -08 000000121 INF: ===================Camera #2 Frame #169===================
17-03-01 08:05:02.625 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:02.701 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 173, frameCount = 174.
17-03-01 08:05:02.701 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 174
17-03-01 08:05:02.701 -08 000000130 INF: ===================Camera #0 Frame #174===================
17-03-01 08:05:02.741 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 174, frameCount = 175.
17-03-01 08:05:02.741 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 175
17-03-01 08:05:02.741 -08 000000121 INF: ===================Camera #2 Frame #175===================
17-03-01 08:05:02.744 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:02.762 -08 000000087 INF: Y Motor: Unshifted Position: 2850968
17-03-01 08:05:02.808 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:02.812 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:02.869 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 179, frameCount = 180.
17-03-01 08:05:02.869 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 180
17-03-01 08:05:02.869 -08 000000130 INF: ===================Camera #0 Frame #180===================
17-03-01 08:05:02.911 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 181, frameCount = 182.
17-03-01 08:05:02.911 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 182
17-03-01 08:05:02.911 -08 000000121 INF: ===================Camera #2 Frame #182===================
17-03-01 08:05:02.935 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.038 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 185, frameCount = 186.
17-03-01 08:05:03.038 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 186
17-03-01 08:05:03.038 -08 000000130 INF: ===================Camera #0 Frame #186===================
17-03-01 08:05:03.058 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:03.072 -08 000000087 INF: Y Motor: Unshifted Position: 2647522
17-03-01 08:05:03.086 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:05:03.086 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:05:03.086 -08 000000121 INF: ===================Camera #2 Frame #188===================
17-03-01 08:05:03.118 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:03.122 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.208 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 192, frameCount = 193.
17-03-01 08:05:03.208 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 193
17-03-01 08:05:03.208 -08 000000130 INF: ===================Camera #0 Frame #193===================
17-03-01 08:05:03.249 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.256 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 193, frameCount = 194.
17-03-01 08:05:03.256 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 194
17-03-01 08:05:03.256 -08 000000121 INF: ===================Camera #2 Frame #194===================
17-03-01 08:05:03.368 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:03.381 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 198, frameCount = 199.
17-03-01 08:05:03.381 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 199
17-03-01 08:05:03.381 -08 000000130 INF: ===================Camera #0 Frame #199===================
17-03-01 08:05:03.386 -08 000000087 INF: Y Motor: Unshifted Position: 2445155
17-03-01 08:05:03.427 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 200, frameCount = 201.
17-03-01 08:05:03.427 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 201
17-03-01 08:05:03.427 -08 000000121 INF: ===================Camera #2 Frame #201===================
17-03-01 08:05:03.434 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:03.436 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.551 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 204, frameCount = 205.
17-03-01 08:05:03.551 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 205
17-03-01 08:05:03.551 -08 000000130 INF: ===================Camera #0 Frame #205===================
17-03-01 08:05:03.560 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.600 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 206, frameCount = 207.
17-03-01 08:05:03.600 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 207
17-03-01 08:05:03.600 -08 000000121 INF: ===================Camera #2 Frame #207===================
17-03-01 08:05:03.684 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:03.697 -08 000000087 INF: Y Motor: Unshifted Position: 2242794
17-03-01 08:05:03.720 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 211, frameCount = 212.
17-03-01 08:05:03.720 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 212
17-03-01 08:05:03.720 -08 000000130 INF: ===================Camera #0 Frame #212===================
17-03-01 08:05:03.743 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:03.747 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.771 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 212, frameCount = 213.
17-03-01 08:05:03.771 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 213
17-03-01 08:05:03.771 -08 000000121 INF: ===================Camera #2 Frame #213===================
17-03-01 08:05:03.871 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:03.893 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 217, frameCount = 218.
17-03-01 08:05:03.893 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 218
17-03-01 08:05:03.893 -08 000000130 INF: ===================Camera #0 Frame #218===================
17-03-01 08:05:03.942 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 219, frameCount = 220.
17-03-01 08:05:03.942 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 220
17-03-01 08:05:03.942 -08 000000121 INF: ===================Camera #2 Frame #220===================
17-03-01 08:05:03.993 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:04.008 -08 000000087 INF: Y Motor: Unshifted Position: 2038689
17-03-01 08:05:04.054 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:04.054 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Pumping Reagent HCM (7)===================
17-03-01 08:05:04.054 -08 000000018 INF: KloehnPump A (KLOEHNA): Waiting 1000 ms before setting solenoid valve back to 'aspirate' position after PumpSolution
17-03-01 08:05:04.058 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:04.063 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 223, frameCount = 224.
17-03-01 08:05:04.063 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 224
17-03-01 08:05:04.063 -08 000000130 INF: ===================Camera #0 Frame #224===================
17-03-01 08:05:04.116 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 225, frameCount = 226.
17-03-01 08:05:04.116 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 226
17-03-01 08:05:04.116 -08 000000121 INF: ===================Camera #2 Frame #226===================
17-03-01 08:05:04.185 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:04.233 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 229, frameCount = 230.
17-03-01 08:05:04.233 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 230
17-03-01 08:05:04.233 -08 000000130 INF: ===================Camera #0 Frame #230===================
17-03-01 08:05:04.286 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 231, frameCount = 232.
17-03-01 08:05:04.286 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 232
17-03-01 08:05:04.286 -08 000000121 INF: ===================Camera #2 Frame #232===================
17-03-01 08:05:04.322 -08 000000087 INF: Y Motor: Unshifted Position: 1836533
17-03-01 08:05:04.372 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:04.403 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 236, frameCount = 237.
17-03-01 08:05:04.403 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 237
17-03-01 08:05:04.403 -08 000000130 INF: ===================Camera #0 Frame #237===================
17-03-01 08:05:04.456 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 238, frameCount = 239.
17-03-01 08:05:04.456 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 239
17-03-01 08:05:04.456 -08 000000121 INF: ===================Camera #2 Frame #239===================
17-03-01 08:05:04.496 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:04.576 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 242, frameCount = 243.
17-03-01 08:05:04.576 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 243
17-03-01 08:05:04.576 -08 000000130 INF: ===================Camera #0 Frame #243===================
17-03-01 08:05:04.630 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 244, frameCount = 245.
17-03-01 08:05:04.630 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 245
17-03-01 08:05:04.630 -08 000000121 INF: ===================Camera #2 Frame #245===================
17-03-01 08:05:04.633 -08 000000087 INF: Y Motor: Unshifted Position: 1634168
17-03-01 08:05:04.683 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:04.745 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 248, frameCount = 249.
17-03-01 08:05:04.745 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 249
17-03-01 08:05:04.745 -08 000000130 INF: ===================Camera #0 Frame #249===================
17-03-01 08:05:04.800 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 250, frameCount = 251.
17-03-01 08:05:04.800 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 251
17-03-01 08:05:04.800 -08 000000121 INF: ===================Camera #2 Frame #251===================
17-03-01 08:05:04.807 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:04.915 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 255, frameCount = 256.
17-03-01 08:05:04.915 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 256
17-03-01 08:05:04.915 -08 000000130 INF: ===================Camera #0 Frame #256===================
17-03-01 08:05:04.945 -08 000000087 INF: Y Motor: Unshifted Position: 1431141
17-03-01 08:05:04.970 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 257, frameCount = 258.
17-03-01 08:05:04.970 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 258
17-03-01 08:05:04.970 -08 000000121 INF: ===================Camera #2 Frame #258===================
17-03-01 08:05:04.995 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:05.088 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 261, frameCount = 262.
17-03-01 08:05:05.088 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 262
17-03-01 08:05:05.088 -08 000000130 INF: ===================Camera #0 Frame #262===================
17-03-01 08:05:05.119 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:05.144 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 263, frameCount = 264.
17-03-01 08:05:05.144 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 264
17-03-01 08:05:05.144 -08 000000121 INF: ===================Camera #2 Frame #264===================
17-03-01 08:05:05.154 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1IR\r
17-03-01 08:05:05.240 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:05.256 -08 000000087 INF: Y Motor: Unshifted Position: 1227044
17-03-01 08:05:05.258 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 267, frameCount = 268.
17-03-01 08:05:05.258 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 268
17-03-01 08:05:05.258 -08 000000130 INF: ===================Camera #0 Frame #268===================
17-03-01 08:05:05.306 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:05.314 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:05:05.314 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 270
17-03-01 08:05:05.314 -08 000000121 INF: ===================Camera #2 Frame #270===================
17-03-01 08:05:05.340 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:05.365 -08 000000095 INF: FPGA: Recv TDIYWAIT
17-03-01 08:05:05.365 -08 000000153 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:05.366 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:05.367 -08 000000153 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:05:05.368 -08 000000084 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:05:05.368 -08 000000113 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:05:05.368 -08 000000084 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:05:05.368 -08 000000084 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:05:05.368 -08 000000084 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:05:05.368 -08 000000113 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:05:05.368 -08 000000084 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:05:05.368 -08 000000113 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:05:05.368 -08 000000113 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:05:05.369 -08 000000113 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:05:05.426 -08 000000130 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:05.426 -08 000000130 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:05.426 -08 000000130 INF: ===================Camera #0 Frame #272===================
17-03-01 08:05:05.433 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:05.438 -08 000000130 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:05.439 -08 000000130 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:05.569 -08 000000130 INF: Camera #0 ReleaseBuffer
17-03-01 08:05:05.569 -08 000000121 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:05.569 -08 000000121 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:05.569 -08 000000121 INF: ===================Camera #2 Frame #272===================
17-03-01 08:05:05.569 -08 000000130 INF: ===================Camera TDI===================
17-03-01 08:05:05.570 -08 000000087 INF: Y Motor: Unshifted Position: 1024889
17-03-01 08:05:05.575 -08 000000121 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:05.576 -08 000000121 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:05.598 -08 000000130 INF: ======================================
17-03-01 08:05:05.616 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:05.620 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:05.677 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:05.677 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:05.677 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Closing shutoff valve===================
17-03-01 08:05:05.738 -08 000000124 INF: FPGA: Recv EX2MV
17-03-01 08:05:05.738 -08 000000084 INF: Excitation Filter 2: Moved 107 steps in 369.9412 ms
17-03-01 08:05:05.738 -08 000000084 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 370.0614 ms
17-03-01 08:05:05.738 -08 000000084 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 370.1316 ms
17-03-01 08:05:05.738 -08 000000084 INF: ======================================
17-03-01 08:05:05.745 -08 000000121 INF: Camera #2 ReleaseBuffer
17-03-01 08:05:05.745 -08 000000121 INF: ===================Camera TDI===================
17-03-01 08:05:05.755 -08 000000087 INF: Y Motor: Unshifted Position: 992372
17-03-01 08:05:05.755 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:05.755 -08 000000087 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:05.778 -08 000000121 INF: ======================================
17-03-01 08:05:05.780 -08 000000094 INF: ===================Camera TDI===================
17-03-01 08:05:05.781 -08 000000094 INF: ======================================
17-03-01 08:05:05.800 -08 000000109 INF: FPGA: Recv EX1MV
17-03-01 08:05:05.800 -08 000000113 INF: Excitation Filter 1: Moved 107 steps in 431.7816 ms
17-03-01 08:05:05.800 -08 000000113 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 431.9124 ms
17-03-01 08:05:05.800 -08 000000113 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 431.995 ms
17-03-01 08:05:05.800 -08 000000113 INF: ======================================
17-03-01 08:05:05.801 -08 000000153 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:05.803 -08 000000153 INF: ======================================
17-03-01 08:05:05.817 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:05.817 -08 000000087 INF: Y Motor: Moved to 14.9237 after 7860 ms
17-03-01 08:05:05.817 -08 000000087 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:05.880 -08 000000087 INF: Y Motor: Recv v 4097\r
17-03-01 08:05:05.880 -08 000000087 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:05.880 -08 000000087 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:05.942 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:05.942 -08 000000087 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:05.942 -08 000000087 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:06.007 -08 000000087 INF: Y Motor: Recv v 134217728\r
17-03-01 08:05:06.007 -08 000000087 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:05:06.007 -08 000000087 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:06.007 -08 000000087 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:06.050 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:06.050 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:06.051 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:06.051 -08 000000018 INF: WaitCommand(10000) start
17-03-01 08:05:06.051 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 10 of 10 seconds left===================
17-03-01 08:05:06.068 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:06.068 -08 000000087 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:06.068 -08 000000087 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:06.068 -08 000000087 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:06.168 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:06.168 -08 000000087 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:06.168 -08 000000087 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:06.223 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:06.223 -08 000000087 INF: ======================================
17-03-01 08:05:06.225 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:06.226 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:06.226 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.227 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:05:06.301 -08 000000145 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:05:06.301 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:06.363 -08 000000031 INF: FPGA: Recv TDIYERD 1492374
17-03-01 08:05:06.363 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:05:06.424 -08 000000040 INF: FPGA: Recv ZADCR 34845
17-03-01 08:05:06.424 -08 000000042 INF: At scan end Y pos = 14.924 and Z pos = -0.133. Y moved -48.539 mm
17-03-01 08:05:06.424 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:05:06.486 -08 000000020 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:05:06.486 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:05:06.486 -08 000000042 INF: TDIScan finished after 12745.1108 ms
17-03-01 08:05:06.486 -08 000000042 INF: Image[0]: Y should trigger at 63.463 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:05:06.486 -08 000000042 INF: Image[2]: Y should trigger at 63.463 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:05:06.488 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.523 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.532 um
17-03-01 08:05:06.524 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.524 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:05:06.551 -08 000000009 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:05:06.552 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.553 -08 000000040 INF: ===================Dither Clean Up Command===================
17-03-01 08:05:06.553 -08 000000104 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:05:06.553 -08 000000097 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:05:06.553 -08 000000133 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:05:06.553 -08 000000133 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:06.553 -08 000000133 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:06.553 -08 000000104 INF: ======================================
17-03-01 08:05:06.553 -08 000000097 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:05:06.553 -08 000000097 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:05:06.553 -08 000000088 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:06.553 -08 000000144 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:06.556 -08 000000088 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:05:06.557 -08 000000144 INF: ===================LFT:Extracting coords===================
17-03-01 08:05:06.582 -08 000000144 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:06.583 -08 000000144 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:05:06.584 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.584 -08 000000064 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.584 -08 000000130 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.584 -08 000000108 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.584 -08 000000093 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:06.584 -08 000000064 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:06.584 -08 000000130 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:06.584 -08 000000108 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:06.599 -08 000000133 INF: Y Motor: Recv ok\r
17-03-01 08:05:06.599 -08 000000133 INF: ======================================
17-03-01 08:05:06.612 -08 000000122 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:06.612 -08 000000122 INF: FPGA: Recv ZSEL 
17-03-01 08:05:06.612 -08 000000088 INF: FPGA: Xmit ZDACW 40010\n
17-03-01 08:05:06.612 -08 000000097 INF: ======================================
17-03-01 08:05:06.658 -08 000000093 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:06.658 -08 000000064 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:06.658 -08 000000130 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:06.659 -08 000000108 INF: FC:B, C:52,L:2, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:06.674 -08 000000119 INF: FPGA: Recv ZDACW 
17-03-01 08:05:06.674 -08 000000088 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:05:06.675 -08 000000088 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:05:06.738 -08 000000094 INF: FPGA: Recv TDIBB
17-03-01 08:05:06.738 -08 000000088 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:06.739 -08 000000088 INF: ======================================
17-03-01 08:05:06.810 -08 000000064 INF: LFT found best fwhm score 2.000058 in 152 ms
17-03-01 08:05:06.810 -08 000000093 INF: LFT found best fwhm score 2.00011 in 152 ms
17-03-01 08:05:06.810 -08 000000064 INF: LFT found good score at index 7385 with fwhm value 2.000058. Next cycle, cycle 53 starting Z position for top surface is at -0.155 mm FC:B, C:52,L:2,T
17-03-01 08:05:06.810 -08 000000130 INF: LFT found best fwhm score 2.000239 in 151 ms
17-03-01 08:05:06.810 -08 000000130 INF: LFT found good score at index 7001 with fwhm value 2.000239. Next cycle, cycle 53 starting Z position for top surface is at -0.155 mm FC:B, C:52,L:2,T
17-03-01 08:05:06.810 -08 000000064 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.810 -08 000000093 INF: LFT found good score at index 2417 with fwhm value 2.00011. Next cycle, cycle 53 starting Z position for top surface is at -0.156 mm FC:B, C:52,L:2,T
17-03-01 08:05:06.810 -08 000000108 INF: LFT found best fwhm score 2.214932 in 151 ms
17-03-01 08:05:06.810 -08 000000108 INF: LFT found good score at index 4281 with fwhm value 2.214932. Next cycle, cycle 53 starting Z position for top surface is at -0.155 mm FC:B, C:52,L:2,T
17-03-01 08:05:06.810 -08 000000130 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.810 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.810 -08 000000064 INF: ======================================
17-03-01 08:05:06.810 -08 000000108 INF: ===================LookupFocusTracking===================
17-03-01 08:05:06.810 -08 000000130 INF: ======================================
17-03-01 08:05:06.811 -08 000000093 INF: ======================================
17-03-01 08:05:06.811 -08 000000108 INF: ======================================
17-03-01 08:05:06.812 -08 000000144 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:06.813 -08 000000144 INF: LFT weighted average best Z for top surface is at -0.155mm FC:B, C:52,L:2,T
17-03-01 08:05:06.813 -08 000000144 INF: ======================================
17-03-01 08:05:06.814 -08 000000040 INF: ======================================
17-03-01 08:05:06.815 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.816 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:05:06.816 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.817 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:05:06.817 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.817 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:05:06.817 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.817 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:05:06.817 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:06.818 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308===================
17-03-01 08:05:06.818 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308===================
17-03-01 08:05:06.819 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 10 of 10 seconds left, Waiting for image analysis===================
17-03-01 08:05:06.819 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 10 of 10 seconds left===================
17-03-01 08:05:06.819 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:05:06.819 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2, Swath 2 - X = 72.50464 Y = 39.76308===================
17-03-01 08:05:06.842 -08 000000042 INF: Waited 23 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 0, buffer wait time 0
17-03-01 08:05:06.843 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:05:06.843 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:05:06.843 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:06.843 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:05:06.844 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 2===================
17-03-01 08:05:06.844 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface===================
17-03-01 08:05:06.913 -08 000000137 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1203 Request: {"Cycle":52,"Lane":2,"Tile":1203,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF234","HCSMMF238","HCSMMF205","HCSMMF186"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:06.945 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:06.947 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:06.948 -08 000000042 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:06.948 -08 000000042 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:07.034 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:05:07.035 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.036 -08 000000042 INF: TopSurfaceZPositions[] was -0.156554519596675, so used the TopSurfaceZPositions[] (-0.156554519596675) + compensator value (0.0227).
17-03-01 08:05:07.041 -08 000000042 INF: LFT enabled: Best z-height for LaneTopSurface and Illumina.Instrument.Logic.Sentrix.II.SentrixSection was found to be -0.133854519596675
17-03-01 08:05:07.041 -08 000000042 INF: Lane 3, LaneTopSurface Surface was not flagged for detilt operations prior to ETF. Moving to default tilt positions: m1=5.000498, m2=5.391912, m3=5.33908
17-03-01 08:05:07.042 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.042 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.043 -08 000000093 INF: ===================Move Tilt Motor 1===================
17-03-01 08:05:07.043 -08 000000036 INF: ===================Move Tilt Motor 2===================
17-03-01 08:05:07.043 -08 000000094 INF: ===================Move Tilt Motor 3===================
17-03-01 08:05:07.043 -08 000000093 INF: Tilt Motor 1: Moving to 5.0005 mm, started at 5.0020 mm, delta = -0.0015 mm
17-03-01 08:05:07.043 -08 000000093 INF: FPGA: Xmit T1RD\n
17-03-01 08:05:07.043 -08 000000036 INF: Tilt Motor 2: Moving to 5.3919 mm, started at 5.3909 mm, delta = 0.0010 mm
17-03-01 08:05:07.043 -08 000000094 INF: Tilt Motor 3: Moving to 5.3391 mm, started at 5.3376 mm, delta = 0.0015 mm
17-03-01 08:05:07.046 -08 000000036 INF: FPGA: Xmit T2RD\n
17-03-01 08:05:07.121 -08 000000069 INF: FPGA: Recv T1RD 19693
17-03-01 08:05:07.121 -08 000000069 INF: FPGA: Recv T2RD 21223
17-03-01 08:05:07.121 -08 000000093 INF: Tilt Motor 1: Encoder: at motor step 3282 + 1/6
17-03-01 08:05:07.121 -08 000000093 INF: Tilt Motor 1: Moving to 19687 encoder counts
17-03-01 08:05:07.122 -08 000000093 INF: FPGA: Xmit T1MOVETO 19687\n
17-03-01 08:05:07.122 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1201 Request: {"Cycle":52,"Lane":2,"Tile":1201,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF244","HCSMMF228","HCSMMF206","HCSMMF236"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:07.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 9 of 10 seconds left===================
17-03-01 08:05:07.122 -08 000000036 INF: Tilt Motor 2: Encoder: at motor step 3537 + 1/6
17-03-01 08:05:07.122 -08 000000036 INF: Tilt Motor 2: Moving to 21228 encoder counts
17-03-01 08:05:07.123 -08 000000121 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1202 Request: {"Cycle":52,"Lane":2,"Tile":1202,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF287","HCSMMF220","HCSMMF226","HCSMMF191"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.123 -08 000000036 INF: FPGA: Xmit T2MOVETO 21228\n
17-03-01 08:05:07.124 -08 000000153 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1210 Request: {"Cycle":52,"Lane":2,"Tile":1210,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF246","HCSMMF275","HCSMMF266","HCSMMF285"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.125 -08 000000094 INF: FPGA: Xmit T3RD\n
17-03-01 08:05:07.132 -08 000000151 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1206 Request: {"Cycle":52,"Lane":2,"Tile":1206,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF282","HCSMMF184","HCSMMF185","HCSMMF211"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.132 -08 000000135 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1212 Request: {"Cycle":52,"Lane":2,"Tile":1212,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF233","HCSMMF286","HCSMMF249","HCSMMF204"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.133 -08 000000087 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1217 Request: {"Cycle":52,"Lane":2,"Tile":1217,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF224","HCSMMF240","HCSMMF260","HCSMMF272"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.134 -08 000000111 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1209 Request: {"Cycle":52,"Lane":2,"Tile":1209,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF261","HCSMMF278","HCSMMF215","HCSMMF223"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.134 -08 000000084 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1204 Request: {"Cycle":52,"Lane":2,"Tile":1204,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF270","HCSMMF247","HCSMMF259","HCSMMF199"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.135 -08 000000088 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1207 Request: {"Cycle":52,"Lane":2,"Tile":1207,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF219","HCSMMF213","HCSMMF248","HCSMMF193"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.136 -08 000000140 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1216 Request: {"Cycle":52,"Lane":2,"Tile":1216,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF182","HCSMMF214","HCSMMF183","HCSMMF190"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.137 -08 000000020 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1213 Request: {"Cycle":52,"Lane":2,"Tile":1213,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF181","HCSMMF276","HCSMMF176","HCSMMF245"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.138 -08 000000146 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1208 Request: {"Cycle":52,"Lane":2,"Tile":1208,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF180","HCSMMF178","HCSMMF210","HCSMMF230"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.138 -08 000000122 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1219 Request: {"Cycle":52,"Lane":2,"Tile":1219,"Channels":["T","C","G","A"],"MemoryMappedFileNames":["HCSMMF242","HCSMMF273","HCSMMF277","HCSMMF187"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.139 -08 000000009 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1205 Request: {"Cycle":52,"Lane":2,"Tile":1205,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF200","HCSMMF258","HCSMMF280","HCSMMF271"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.140 -08 000000148 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1218 Request: {"Cycle":52,"Lane":2,"Tile":1218,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF196","HCSMMF229","HCSMMF235","HCSMMF241"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.141 -08 000000067 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1215 Request: {"Cycle":52,"Lane":2,"Tile":1215,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF268","HCSMMF274","HCSMMF243","HCSMMF188"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.142 -08 000000118 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1221 Request: {"Cycle":52,"Lane":2,"Tile":1221,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF269","HCSMMF237","HCSMMF250","HCSMMF208"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.143 -08 000000095 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1214 Request: {"Cycle":52,"Lane":2,"Tile":1214,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF201","HCSMMF207","HCSMMF195","HCSMMF218"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.144 -08 000000062 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1227 Request: {"Cycle":52,"Lane":2,"Tile":1227,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF231","HCSMMF263","HCSMMF253","HCSMMF262"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.145 -08 000000150 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1226 Request: {"Cycle":52,"Lane":2,"Tile":1226,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF221","HCSMMF232","HCSMMF283","HCSMMF222"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.146 -08 000000125 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1228 Request: {"Cycle":52,"Lane":2,"Tile":1228,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF194","HCSMMF265","HCSMMF251","HCSMMF254"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.146 -08 000000054 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1211 Request: {"Cycle":52,"Lane":2,"Tile":1211,"Channels":["C","G","A","T"],"MemoryMappedFileNames":["HCSMMF179","HCSMMF217","HCSMMF209","HCSMMF192"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.147 -08 000000130 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1222 Request: {"Cycle":52,"Lane":2,"Tile":1222,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF189","HCSMMF225","HCSMMF239","HCSMMF227"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.148 -08 000000064 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1223 Request: {"Cycle":52,"Lane":2,"Tile":1223,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF198","HCSMMF216","HCSMMF255","HCSMMF257"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.149 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1224 Request: {"Cycle":52,"Lane":2,"Tile":1224,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF252","HCSMMF197","HCSMMF267","HCSMMF203"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.150 -08 000000116 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1225 Request: {"Cycle":52,"Lane":2,"Tile":1225,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF256","HCSMMF281","HCSMMF177","HCSMMF212"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.151 -08 000000097 INF: Notifying RTA to Process Multi MMF for Lane: 2 Cycle: 52 Tile: 1220 Request: {"Cycle":52,"Lane":2,"Tile":1220,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF284","HCSMMF202","HCSMMF264","HCSMMF279"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:07.171 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:07.175 -08 000000135 INF: FPGA: Recv T3RD 21015
17-03-01 08:05:07.175 -08 000000094 INF: Tilt Motor 3: Encoder: at motor step 3502 + 3/6
17-03-01 08:05:07.175 -08 000000094 INF: Tilt Motor 3: Moving to 21020 encoder counts
17-03-01 08:05:07.175 -08 000000094 INF: FPGA: Xmit T3MOVETO 21020\n
17-03-01 08:05:07.177 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:05:07.238 -08 000000095 INF: FPGA: Recv T1MOVETO 1
17-03-01 08:05:07.238 -08 000000095 INF: FPGA: Recv T2MOVETO 1
17-03-01 08:05:07.238 -08 000000036 INF: Tilt Motor 2: To move from 5.391 to 5.392 (0.001 mm) should take 1 steps, but required 1 steps (0.002 mm). Slippage = 0.000 mm (0.00%)
17-03-01 08:05:07.238 -08 000000093 INF: Tilt Motor 1: To move from 5.002 to 5.000 (-0.002 mm) should take 1 steps, but required 1 steps (0.002 mm). Slippage = 0.000 mm (0.00%)
17-03-01 08:05:07.238 -08 000000036 INF: FPGA: Xmit T2RD\n
17-03-01 08:05:07.239 -08 000000093 INF: FPGA: Xmit T1RD\n
17-03-01 08:05:07.258 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:07.258 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:05:07.294 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:07.299 -08 000000146 INF: FPGA: Recv T2RD 21230
17-03-01 08:05:07.299 -08 000000146 INF: FPGA: Recv T3MOVETO 1
17-03-01 08:05:07.299 -08 000000146 INF: FPGA: Recv T1RD 19687
17-03-01 08:05:07.299 -08 000000093 INF: Tilt Motor 1: Encoder: at motor step 3281 + 1/6
17-03-01 08:05:07.299 -08 000000094 INF: Tilt Motor 3: To move from 5.338 to 5.339 (0.002 mm) should take 1 steps, but required 1 steps (0.002 mm). Slippage = 0.000 mm (0.00%)
17-03-01 08:05:07.299 -08 000000093 INF: FPGA: Xmit T1RD\n
17-03-01 08:05:07.299 -08 000000036 INF: Tilt Motor 2: Encoder: at motor step 3538 + 2/6
17-03-01 08:05:07.300 -08 000000036 INF: FPGA: Xmit T2RD\n
17-03-01 08:05:07.300 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:05:07.302 -08 000000094 INF: FPGA: Xmit T3RD\n
17-03-01 08:05:07.361 -08 000000140 INF: FPGA: Recv T1RD 19687
17-03-01 08:05:07.361 -08 000000140 INF: FPGA: Recv T2RD 21229
17-03-01 08:05:07.361 -08 000000140 INF: FPGA: Recv T3RD 21021
17-03-01 08:05:07.361 -08 000000093 INF: Tilt Motor 1: Encoder: at motor step 3281 + 1/6
17-03-01 08:05:07.361 -08 000000094 INF: Tilt Motor 3: Encoder: at motor step 3503 + 3/6
17-03-01 08:05:07.361 -08 000000036 INF: Tilt Motor 2: Encoder: at motor step 3538 + 1/6
17-03-01 08:05:07.361 -08 000000093 INF: FPGA: Xmit T1RD\n
17-03-01 08:05:07.364 -08 000000094 INF: FPGA: Xmit T3RD\n
17-03-01 08:05:07.365 -08 000000036 INF: FPGA: Xmit T2RD\n
17-03-01 08:05:07.403 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:07.409 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:05:07.423 -08 000000113 INF: FPGA: Recv T1RD 19687
17-03-01 08:05:07.423 -08 000000113 INF: FPGA: Recv T3RD 21021
17-03-01 08:05:07.423 -08 000000113 INF: FPGA: Recv T2RD 21229
17-03-01 08:05:07.423 -08 000000036 INF: Tilt Motor 2: Encoder: at motor step 3538 + 1/6
17-03-01 08:05:07.423 -08 000000094 INF: Tilt Motor 3: Encoder: at motor step 3503 + 3/6
17-03-01 08:05:07.423 -08 000000036 INF: Tilt Motor 2: After move to 5.3919, error = 0.0003, min/max error = -0.0020/0.0015, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:05:07.423 -08 000000094 INF: FPGA: Xmit T3RD\n
17-03-01 08:05:07.423 -08 000000036 INF: Tilt Motor 2: Moved to 5.3922 after 380.079 ms
17-03-01 08:05:07.423 -08 000000093 INF: Tilt Motor 1: Encoder: at motor step 3281 + 1/6
17-03-01 08:05:07.423 -08 000000093 INF: Tilt Motor 1: After move to 5.0005, error = 0.0000, min/max error = -0.0015/0.0019, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:05:07.423 -08 000000093 INF: Tilt Motor 1: Moved to 5.0005 after 380.3855 ms
17-03-01 08:05:07.424 -08 000000036 INF: ======================================
17-03-01 08:05:07.424 -08 000000093 INF: ======================================
17-03-01 08:05:07.485 -08 000000095 INF: FPGA: Recv T3RD 21021
17-03-01 08:05:07.485 -08 000000094 INF: Tilt Motor 3: Encoder: at motor step 3503 + 3/6
17-03-01 08:05:07.485 -08 000000094 INF: Tilt Motor 3: After move to 5.3391, error = 0.0003, min/max error = -0.0017/0.0016, tolerance = 0.0107 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:05:07.485 -08 000000094 INF: Tilt Motor 3: Moved to 5.3393 after 441.953 ms
17-03-01 08:05:07.486 -08 000000094 INF: ======================================
17-03-01 08:05:07.487 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.487 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.488 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.489 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.489 -08 000000042 INF: Compensator: Remaining IntoPath
17-03-01 08:05:07.489 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.490 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:07.496 -08 000000042 INF: Swath 1 position calculated to be: {X=74.16164, Y=39.76308} from estimated center X= 74.67699, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:05:07.496 -08 000000042 INF: Swath 2 position calculated to be: {X=75.26964, Y=39.76308} from estimated center X= 74.67699, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:05:07.502 -08 000000042 INF: Swath 0: Converted transform from (-61.35698, 55.40684) pixels to (-0.021045, 0.018975) mm.
17-03-01 08:05:07.508 -08 000000042 INF: Swath 1: Converted transform from (-85.31414, 54.56091) pixels to (-0.029325, 0.018975) mm.
17-03-01 08:05:07.508 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:07.509 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308===================
17-03-01 08:05:07.509 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308===================
17-03-01 08:05:07.509 -08 000000042 INF: Transformed XStagePosition from 74.16164 mm to 74.140591353178 mm.
17-03-01 08:05:07.514 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:05:07.521 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5720643562973 mm.
17-03-01 08:05:07.521 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3720643562973 mm.
17-03-01 08:05:07.521 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4628143562973 mm.
17-03-01 08:05:07.523 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:07.523 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:05:07.523 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:07.524 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -152.6 um, section = C_1
17-03-01 08:05:07.525 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:07.525 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:07.526 -08 000000069 INF: ===================Move X,Y===================
17-03-01 08:05:07.526 -08 000000067 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:07.526 -08 000000146 INF: ===================MoveEmissionFilters===================
17-03-01 08:05:07.527 -08 000000069 INF: ===================Move X,Y, Parallel===================
17-03-01 08:05:07.527 -08 000000067 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:05:07.527 -08 000000067 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:05:07.527 -08 000000067 INF: Z Motor: Moving to -0.1539 mm, started at -0.1526 mm
17-03-01 08:05:07.527 -08 000000067 INF: FPGA: Xmit ZTRG 0\n
17-03-01 08:05:07.527 -08 000000108 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:07.527 -08 000000062 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:07.527 -08 000000122 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:07.528 -08 000000151 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:07.528 -08 000000087 INF: ===================Move X Motor without settling===================
17-03-01 08:05:07.528 -08 000000109 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:07.528 -08 000000109 INF: Y Motor: Moving to 64.5721 mm @25.000 mm/sec, started at 14.9237 mm
17-03-01 08:05:07.528 -08 000000109 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:07.528 -08 000000109 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:07.528 -08 000000108 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:07.528 -08 000000062 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:07.528 -08 000000151 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:07.529 -08 000000087 INF: X Motor: Xmit PR VM\n
17-03-01 08:05:07.529 -08 000000020 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:05:07.529 -08 000000023 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:05:07.529 -08 000000059 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:05:07.529 -08 000000148 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:05:07.529 -08 000000059 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:05:07.529 -08 000000020 INF: ======================================
17-03-01 08:05:07.529 -08 000000105 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:05:07.530 -08 000000113 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:05:07.530 -08 000000148 INF: ======================================
17-03-01 08:05:07.530 -08 000000105 INF: ======================================
17-03-01 08:05:07.530 -08 000000113 INF: ======================================
17-03-01 08:05:07.531 -08 000000023 INF: ======================================
17-03-01 08:05:07.531 -08 000000151 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:07.531 -08 000000122 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:07.532 -08 000000113 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:05:07.532 -08 000000062 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:07.532 -08 000000118 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:05:07.532 -08 000000151 INF: ======================================
17-03-01 08:05:07.532 -08 000000113 INF: ======================================
17-03-01 08:05:07.533 -08 000000118 INF: ======================================
17-03-01 08:05:07.533 -08 000000059 INF: ======================================
17-03-01 08:05:07.533 -08 000000062 INF: ======================================
17-03-01 08:05:07.534 -08 000000122 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:07.535 -08 000000108 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:07.535 -08 000000122 INF: ======================================
17-03-01 08:05:07.536 -08 000000108 INF: ======================================
17-03-01 08:05:07.537 -08 000000146 INF: ======================================
17-03-01 08:05:07.549 -08 000000116 INF: FPGA: Recv ZTRG 
17-03-01 08:05:07.550 -08 000000067 INF: FPGA: Xmit ZYT 0 3\n
17-03-01 08:05:07.609 -08 000000095 INF: FPGA: Recv ZYT 
17-03-01 08:05:07.609 -08 000000067 INF: Z Motor: ZMV will trigger camera immediately and ramp is HW controlled
17-03-01 08:05:07.609 -08 000000067 INF: FPGA: Xmit ZMV 40331\n
17-03-01 08:05:07.611 -08 000000109 INF: Y Motor: Recv ok\r
17-03-01 08:05:07.611 -08 000000109 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:07.611 -08 000000109 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:07.612 -08 000000087 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:05:07.612 -08 000000087 INF: X Motor: Xmit PR VI\n
17-03-01 08:05:07.619 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:07.674 -08 000000084 INF: FPGA: Recv @LOG Trigger Camera
17-03-01 08:05:07.674 -08 000000084 INF: FPGA: Recv ZMV 
17-03-01 08:05:07.674 -08 000000006 INF: FPGA: Trigger Camera
17-03-01 08:05:07.674 -08 000000067 INF: Z Motor: MoveAndTrigger 'ZMV' command took 64.9221 ms
17-03-01 08:05:07.674 -08 000000067 INF: FPGA: Xmit ZDACR\n
17-03-01 08:05:07.676 -08 000000087 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:05:07.676 -08 000000087 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:05:07.676 -08 000000087 INF: X Motor: Moving to 74.1406 mm @15.000 mm/sec, started at 72.4766 mm
17-03-01 08:05:07.676 -08 000000109 INF: Y Motor: Recv ok\r
17-03-01 08:05:07.676 -08 000000087 INF: X Motor: Xmit MA 6202\n
17-03-01 08:05:07.676 -08 000000109 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:07.737 -08 000000146 INF: FPGA: Recv ZDACR 40331
17-03-01 08:05:07.737 -08 000000067 INF: Z Motor: MoveAndTrigger took 209.7099 ms w/comms
17-03-01 08:05:07.737 -08 000000067 INF: Z Motor: After move to -0.1539, error = 0.0000, min/max error = 0.0000/0.0000, tolerance = 0.0010 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:05:07.737 -08 000000067 INF: Z Motor: MoveAbsStepped took 209.9189 ms
17-03-01 08:05:07.737 -08 000000067 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:07.738 -08 000000109 INF: Y Motor: Recv v 0\r
17-03-01 08:05:07.738 -08 000000109 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:07.738 -08 000000087 INF: X Motor: Recv MA 6202\r\n>
17-03-01 08:05:07.738 -08 000000109 INF: Y Motor: Set target position to 5957206 encoder counts
17-03-01 08:05:07.738 -08 000000109 INF: Y Motor: Xmit s r0xca 5957206\r
17-03-01 08:05:07.738 -08 000000087 INF: X Motor: WaitUntilStopped 60111
17-03-01 08:05:07.739 -08 000000067 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:05:07.740 -08 000000137 INF: ===================TDI Scan Setup===================
17-03-01 08:05:07.740 -08 000000094 INF: ===================Camera Arm TDI===================
17-03-01 08:05:07.740 -08 000000137 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:07.741 -08 000000094 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:07.741 -08 000000137 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:07.742 -08 000000137 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:07.742 -08 000000094 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:07.742 -08 000000137 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:05:07.798 -08 000000088 INF: FPGA: Recv ZSEL 
17-03-01 08:05:07.799 -08 000000137 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:07.799 -08 000000137 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:05:07.800 -08 000000109 INF: Y Motor: Recv ok\r
17-03-01 08:05:07.800 -08 000000109 INF: Y Motor: Start the move command
17-03-01 08:05:07.800 -08 000000109 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:07.860 -08 000000144 INF: FPGA: Recv TDIBB
17-03-01 08:05:07.860 -08 000000137 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:07.861 -08 000000137 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:07.862 -08 000000109 INF: Y Motor: Recv ok\r
17-03-01 08:05:07.862 -08 000000137 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:07.862 -08 000000109 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:05:07.862 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:07.863 -08 000000137 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:05:07.863 -08 000000137 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:05:07.864 -08 000000137 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:05:07.908 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:05:07.921 -08 000000088 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:07.921 -08 000000137 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:07.923 -08 000000137 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:05:07.923 -08 000000137 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:07.925 -08 000000137 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:05:07.925 -08 000000137 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:05:07.925 -08 000000137 INF: Z Motor: Arming to move to -0.1139 mm
17-03-01 08:05:07.925 -08 000000137 INF: FPGA: Xmit ZYT 6437206 4\n
17-03-01 08:05:07.988 -08 000000054 INF: FPGA: Recv ZYT 
17-03-01 08:05:07.989 -08 000000109 INF: Y Motor: Unshifted Position: 1073001
17-03-01 08:05:07.989 -08 000000137 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492372 enc / 14.924 mm / ) = 6437206 enc / 64.372 mm
17-03-01 08:05:07.989 -08 000000137 INF: FPGA: Xmit ZARM 29846\n
17-03-01 08:05:08.039 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:08.048 -08 000000065 INF: FPGA: Recv ZARM
17-03-01 08:05:08.048 -08 000000137 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 59.1565 ms
17-03-01 08:05:08.048 -08 000000137 INF: Z Motor: ArmAbsStepped took 122.8647 ms
17-03-01 08:05:08.048 -08 000000137 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:08.050 -08 000000137 INF: ===================TDI Scan Setup===================
17-03-01 08:05:08.051 -08 000000137 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:05:08.052 -08 000000137 INF: ===================TDI Scan Setup===================
17-03-01 08:05:08.053 -08 000000137 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:05:08.054 -08 000000137 INF: ===================TDI Scan Setup===================
17-03-01 08:05:08.055 -08 000000137 INF: ======================================
17-03-01 08:05:08.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:08.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 8 of 10 seconds left===================
17-03-01 08:05:08.162 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:08.298 -08 000000109 INF: Y Motor: Unshifted Position: 1782371
17-03-01 08:05:08.348 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:08.360 -08 000000087 INF: X Motor: Xmit PR ER\n
17-03-01 08:05:08.378 -08 000000094 INF: Camera #0 AttachBuffer (imageDataPtr = 56923197488 imgPtr = 56923197488 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:08.378 -08 000000094 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:08.378 -08 000000094 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:08.394 -08 000000094 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:08.396 -08 000000094 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:08.422 -08 000000087 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:05:08.422 -08 000000087 INF: X Motor: Moved to 74.1416 after 683 ms
17-03-01 08:05:08.422 -08 000000087 INF: ======================================
17-03-01 08:05:08.472 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:08.611 -08 000000109 INF: Y Motor: Unshifted Position: 2562403
17-03-01 08:05:08.661 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:08.785 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:08.922 -08 000000109 INF: Y Motor: Unshifted Position: 3338173
17-03-01 08:05:08.972 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:09.018 -08 000000094 INF: Camera #2 AttachBuffer (imageDataPtr = 58735136816 imgPtr = 64223121456 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:09.019 -08 000000094 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:09.019 -08 000000094 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:09.034 -08 000000094 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:09.036 -08 000000094 INF: ===================Camera Arm TDI===================
17-03-01 08:05:09.037 -08 000000094 INF: ======================================
17-03-01 08:05:09.038 -08 000000067 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:09.039 -08 000000067 INF: ======================================
17-03-01 08:05:09.096 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:09.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:09.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 7 of 10 seconds left===================
17-03-01 08:05:09.235 -08 000000109 INF: Y Motor: Unshifted Position: 4124078
17-03-01 08:05:09.285 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:09.409 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:09.548 -08 000000109 INF: Y Motor: Unshifted Position: 4899012
17-03-01 08:05:09.598 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:09.724 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:09.859 -08 000000109 INF: Y Motor: Unshifted Position: 5683370
17-03-01 08:05:09.909 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:10.033 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:10.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:10.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 6 of 10 seconds left===================
17-03-01 08:05:10.172 -08 000000109 INF: Y Motor: Unshifted Position: 5957208
17-03-01 08:05:10.172 -08 000000109 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:10.172 -08 000000109 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:10.234 -08 000000109 INF: Y Motor: Recv v 0\r
17-03-01 08:05:10.234 -08 000000109 INF: Y Motor: Moved to 64.5721 after 2372 ms
17-03-01 08:05:10.234 -08 000000109 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:10.296 -08 000000109 INF: Y Motor: Recv v 4096\r
17-03-01 08:05:10.296 -08 000000109 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:10.296 -08 000000109 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:10.376 -08 000000109 INF: Y Motor: Recv v 0\r
17-03-01 08:05:10.376 -08 000000109 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:10.376 -08 000000109 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:10.436 -08 000000109 INF: Y Motor: Recv v 402653184\r
17-03-01 08:05:10.436 -08 000000109 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:05:10.436 -08 000000109 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:10.436 -08 000000109 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:10.498 -08 000000109 INF: Y Motor: Recv v 0\r
17-03-01 08:05:10.498 -08 000000109 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:10.498 -08 000000109 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:10.498 -08 000000109 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:10.560 -08 000000109 INF: Y Motor: Recv ok\r
17-03-01 08:05:10.560 -08 000000109 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:10.560 -08 000000109 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:10.624 -08 000000109 INF: Y Motor: Recv ok\r
17-03-01 08:05:10.624 -08 000000109 INF: ======================================
17-03-01 08:05:10.625 -08 000000069 INF: ===================Move X,Y===================
17-03-01 08:05:10.626 -08 000000069 INF: ======================================
17-03-01 08:05:10.627 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:10.628 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:10.628 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:05:10.628 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:05:10.686 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:05:10.686 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:05:10.747 -08 000000104 INF: FPGA: Recv ZFREQCL
17-03-01 08:05:10.748 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:05:10.748 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:10.748 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:10.809 -08 000000065 INF: FPGA: Recv TDIYERD 6457207
17-03-01 08:05:10.809 -08 000000042 INF: Before scan, Y encoder from FPGA = 6457207 counts (64.572 mm)
17-03-01 08:05:10.809 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:10.810 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:10.811 -08 000000118 INF: ===================Set YMotor gains for scans===================
17-03-01 08:05:10.811 -08 000000064 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:10.811 -08 000000118 INF: ======================================
17-03-01 08:05:10.812 -08 000000064 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:10.812 -08 000000064 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:05:10.813 -08 000000064 INF: FPGA: Xmit TDIYPOS 6346281\n
17-03-01 08:05:10.871 -08 000000059 INF: FPGA: Recv TDIYPOS
17-03-01 08:05:10.872 -08 000000064 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:10.873 -08 000000064 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:05:10.873 -08 000000064 INF: FPGA: Xmit TDIYARM3 139264 6437206 1 1\n
17-03-01 08:05:10.932 -08 000000133 INF: FPGA: Recv TDIYARM3
17-03-01 08:05:10.932 -08 000000064 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:10.934 -08 000000064 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:10.935 -08 000000064 INF: ======================================
17-03-01 08:05:10.936 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:10.936 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:10.937 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:10.937 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:10.938 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:10.938 -08 000000067 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:05:10.939 -08 000000154 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:05:10.939 -08 000000067 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:05:10.939 -08 000000067 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:05:10.939 -08 000000067 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:05:10.939 -08 000000154 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:05:10.939 -08 000000154 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:05:10.939 -08 000000154 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:05:10.939 -08 000000067 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:05:10.940 -08 000000154 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:05:11.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:11.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 5 of 10 seconds left===================
17-03-01 08:05:11.372 -08 000000104 INF: FPGA: Recv EX2MV
17-03-01 08:05:11.372 -08 000000104 INF: FPGA: Recv EX1MV
17-03-01 08:05:11.372 -08 000000154 INF: Excitation Filter 1: Moved -107 steps in 433.213 ms
17-03-01 08:05:11.372 -08 000000067 INF: Excitation Filter 2: Moved -107 steps in 433.4088 ms
17-03-01 08:05:11.372 -08 000000067 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 433.5818 ms
17-03-01 08:05:11.372 -08 000000067 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 433.6567 ms
17-03-01 08:05:11.372 -08 000000154 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 433.3537 ms
17-03-01 08:05:11.372 -08 000000154 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 433.7809 ms
17-03-01 08:05:11.373 -08 000000067 INF: ======================================
17-03-01 08:05:11.373 -08 000000154 INF: ======================================
17-03-01 08:05:11.374 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:11.375 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:11.376 -08 000000097 INF: ===================Camera TDI===================
17-03-01 08:05:11.376 -08 000000144 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:11.376 -08 000000140 INF: ===================FPGA Z Wait===================
17-03-01 08:05:11.376 -08 000000140 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:05:11.376 -08 000000092 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:11.377 -08 000000097 INF: ===================Camera TDI, Parallel===================
17-03-01 08:05:11.377 -08 000000092 INF: Y Motor: Moving to 14.9237 mm @6.500 mm/sec, started at 64.5721 mm
17-03-01 08:05:11.377 -08 000000144 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:05:11.377 -08 000000092 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:11.377 -08 000000092 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:11.377 -08 000000144 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:05:11.377 -08 000000020 INF: ===================Camera TDI===================
17-03-01 08:05:11.377 -08 000000122 INF: ===================Camera TDI===================
17-03-01 08:05:11.380 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:11.380 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:11.382 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:11.382 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:11.433 -08 000000092 INF: Y Motor: Recv ok\r
17-03-01 08:05:11.433 -08 000000092 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:11.433 -08 000000092 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:11.496 -08 000000092 INF: Y Motor: Recv ok\r
17-03-01 08:05:11.496 -08 000000092 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:11.530 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:11.530 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:11.532 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:11.532 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:11.558 -08 000000092 INF: Y Motor: Recv v 0\r
17-03-01 08:05:11.558 -08 000000092 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:11.558 -08 000000092 INF: Y Motor: Set target position to 992373 encoder counts
17-03-01 08:05:11.558 -08 000000092 INF: Y Motor: Xmit s r0xca 992373\r
17-03-01 08:05:11.620 -08 000000092 INF: Y Motor: Recv ok\r
17-03-01 08:05:11.620 -08 000000092 INF: Y Motor: Start the move command
17-03-01 08:05:11.620 -08 000000092 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:11.680 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:11.680 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:11.682 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:11.682 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:11.685 -08 000000092 INF: Y Motor: Recv ok\r
17-03-01 08:05:11.685 -08 000000092 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:05:11.685 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:11.745 -08 000000119 INF: FPGA: Recv ZWAIT 
17-03-01 08:05:11.746 -08 000000140 INF: ======================================
17-03-01 08:05:11.809 -08 000000092 INF: Y Motor: Unshifted Position: 5893404
17-03-01 08:05:11.830 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:11.830 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:11.830 -08 000000020 INF: ===================Camera #0 Frame #5===================
17-03-01 08:05:11.832 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:11.832 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:11.832 -08 000000122 INF: ===================Camera #2 Frame #5===================
17-03-01 08:05:11.859 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:11.983 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:12.002 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:12.002 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:12.002 -08 000000020 INF: ===================Camera #0 Frame #11===================
17-03-01 08:05:12.005 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:12.005 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:12.005 -08 000000122 INF: ===================Camera #2 Frame #11===================
17-03-01 08:05:12.121 -08 000000092 INF: Y Motor: Unshifted Position: 5690607
17-03-01 08:05:12.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:12.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 4 of 10 seconds left===================
17-03-01 08:05:12.171 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:12.178 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 17, frameCount = 18.
17-03-01 08:05:12.178 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 18
17-03-01 08:05:12.178 -08 000000020 INF: ===================Camera #0 Frame #18===================
17-03-01 08:05:12.182 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 17, frameCount = 18.
17-03-01 08:05:12.182 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 18
17-03-01 08:05:12.182 -08 000000122 INF: ===================Camera #2 Frame #18===================
17-03-01 08:05:12.295 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:12.352 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:05:12.352 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:05:12.352 -08 000000020 INF: ===================Camera #0 Frame #24===================
17-03-01 08:05:12.364 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:05:12.364 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:05:12.364 -08 000000122 INF: ===================Camera #2 Frame #24===================
17-03-01 08:05:12.431 -08 000000092 INF: Y Motor: Unshifted Position: 5488891
17-03-01 08:05:12.481 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:12.528 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:05:12.528 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:05:12.528 -08 000000020 INF: ===================Camera #0 Frame #30===================
17-03-01 08:05:12.536 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 30, frameCount = 31.
17-03-01 08:05:12.536 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 31
17-03-01 08:05:12.536 -08 000000122 INF: ===================Camera #2 Frame #31===================
17-03-01 08:05:12.608 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:12.696 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:12.696 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:12.696 -08 000000020 INF: ===================Camera #0 Frame #37===================
17-03-01 08:05:12.708 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:12.708 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:12.708 -08 000000122 INF: ===================Camera #2 Frame #37===================
17-03-01 08:05:12.744 -08 000000092 INF: Y Motor: Unshifted Position: 5285435
17-03-01 08:05:12.794 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:12.867 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:12.867 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:12.867 -08 000000020 INF: ===================Camera #0 Frame #43===================
17-03-01 08:05:12.877 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:12.877 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:12.877 -08 000000122 INF: ===================Camera #2 Frame #43===================
17-03-01 08:05:12.918 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.036 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 48, frameCount = 49.
17-03-01 08:05:13.036 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 49
17-03-01 08:05:13.036 -08 000000020 INF: ===================Camera #0 Frame #49===================
17-03-01 08:05:13.047 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:05:13.047 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:05:13.047 -08 000000122 INF: ===================Camera #2 Frame #50===================
17-03-01 08:05:13.057 -08 000000092 INF: Y Motor: Unshifted Position: 5077004
17-03-01 08:05:13.107 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:13.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 3 of 10 seconds left===================
17-03-01 08:05:13.205 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 54, frameCount = 55.
17-03-01 08:05:13.205 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 55
17-03-01 08:05:13.205 -08 000000020 INF: ===================Camera #0 Frame #55===================
17-03-01 08:05:13.220 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:05:13.220 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:05:13.220 -08 000000122 INF: ===================Camera #2 Frame #56===================
17-03-01 08:05:13.231 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.367 -08 000000092 INF: Y Motor: Unshifted Position: 4878968
17-03-01 08:05:13.374 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:13.374 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:13.374 -08 000000020 INF: ===================Camera #0 Frame #62===================
17-03-01 08:05:13.390 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:13.390 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:13.390 -08 000000122 INF: ===================Camera #2 Frame #62===================
17-03-01 08:05:13.417 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.544 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.545 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:13.545 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:13.545 -08 000000020 INF: ===================Camera #0 Frame #68===================
17-03-01 08:05:13.559 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:13.559 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:13.559 -08 000000122 INF: ===================Camera #2 Frame #68===================
17-03-01 08:05:13.680 -08 000000092 INF: Y Motor: Unshifted Position: 4676607
17-03-01 08:05:13.714 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 73, frameCount = 74.
17-03-01 08:05:13.714 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 74
17-03-01 08:05:13.714 -08 000000020 INF: ===================Camera #0 Frame #74===================
17-03-01 08:05:13.728 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:05:13.728 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:05:13.728 -08 000000122 INF: ===================Camera #2 Frame #75===================
17-03-01 08:05:13.730 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.856 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:13.882 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 79, frameCount = 80.
17-03-01 08:05:13.882 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 80
17-03-01 08:05:13.882 -08 000000020 INF: ===================Camera #0 Frame #80===================
17-03-01 08:05:13.900 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:05:13.900 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:05:13.900 -08 000000122 INF: ===================Camera #2 Frame #81===================
17-03-01 08:05:13.993 -08 000000092 INF: Y Motor: Unshifted Position: 4473139
17-03-01 08:05:14.043 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:14.050 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 85, frameCount = 86.
17-03-01 08:05:14.050 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 86
17-03-01 08:05:14.050 -08 000000020 INF: ===================Camera #0 Frame #86===================
17-03-01 08:05:14.069 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:14.069 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:14.069 -08 000000122 INF: ===================Camera #2 Frame #87===================
17-03-01 08:05:14.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:14.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 2 of 10 seconds left===================
17-03-01 08:05:14.168 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:14.218 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:14.218 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:14.218 -08 000000020 INF: ===================Camera #0 Frame #93===================
17-03-01 08:05:14.238 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:14.238 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:14.238 -08 000000122 INF: ===================Camera #2 Frame #93===================
17-03-01 08:05:14.304 -08 000000092 INF: Y Motor: Unshifted Position: 4270782
17-03-01 08:05:14.354 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:14.389 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 98, frameCount = 99.
17-03-01 08:05:14.389 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 99
17-03-01 08:05:14.389 -08 000000020 INF: ===================Camera #0 Frame #99===================
17-03-01 08:05:14.407 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:05:14.407 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:05:14.407 -08 000000122 INF: ===================Camera #2 Frame #100===================
17-03-01 08:05:14.480 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:14.557 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 104, frameCount = 105.
17-03-01 08:05:14.557 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 105
17-03-01 08:05:14.557 -08 000000020 INF: ===================Camera #0 Frame #105===================
17-03-01 08:05:14.579 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 105, frameCount = 106.
17-03-01 08:05:14.579 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 106
17-03-01 08:05:14.579 -08 000000122 INF: ===================Camera #2 Frame #106===================
17-03-01 08:05:14.617 -08 000000092 INF: Y Motor: Unshifted Position: 4067321
17-03-01 08:05:14.667 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:14.725 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 110, frameCount = 111.
17-03-01 08:05:14.725 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 111
17-03-01 08:05:14.725 -08 000000020 INF: ===================Camera #0 Frame #111===================
17-03-01 08:05:14.748 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 111, frameCount = 112.
17-03-01 08:05:14.748 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 112
17-03-01 08:05:14.748 -08 000000122 INF: ===================Camera #2 Frame #112===================
17-03-01 08:05:14.793 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:14.893 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 116, frameCount = 117.
17-03-01 08:05:14.893 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 117
17-03-01 08:05:14.893 -08 000000020 INF: ===================Camera #0 Frame #117===================
17-03-01 08:05:14.917 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:14.917 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:14.917 -08 000000122 INF: ===================Camera #2 Frame #118===================
17-03-01 08:05:14.927 -08 000000092 INF: Y Motor: Unshifted Position: 3865605
17-03-01 08:05:14.977 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.061 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 123, frameCount = 124.
17-03-01 08:05:15.061 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 124
17-03-01 08:05:15.061 -08 000000020 INF: ===================Camera #0 Frame #124===================
17-03-01 08:05:15.086 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 124, frameCount = 125.
17-03-01 08:05:15.086 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 125
17-03-01 08:05:15.086 -08 000000122 INF: ===================Camera #2 Frame #125===================
17-03-01 08:05:15.104 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:15.122 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock, Delay 1 of 10 seconds left===================
17-03-01 08:05:15.232 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 129, frameCount = 130.
17-03-01 08:05:15.232 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 130
17-03-01 08:05:15.232 -08 000000020 INF: ===================Camera #0 Frame #130===================
17-03-01 08:05:15.241 -08 000000092 INF: Y Motor: Unshifted Position: 3661285
17-03-01 08:05:15.258 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 130, frameCount = 131.
17-03-01 08:05:15.258 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 131
17-03-01 08:05:15.258 -08 000000122 INF: ===================Camera #2 Frame #131===================
17-03-01 08:05:15.291 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.401 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 135, frameCount = 136.
17-03-01 08:05:15.401 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 136
17-03-01 08:05:15.401 -08 000000020 INF: ===================Camera #0 Frame #136===================
17-03-01 08:05:15.415 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.428 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 136, frameCount = 137.
17-03-01 08:05:15.428 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 137
17-03-01 08:05:15.428 -08 000000122 INF: ===================Camera #2 Frame #137===================
17-03-01 08:05:15.551 -08 000000092 INF: Y Motor: Unshifted Position: 3459789
17-03-01 08:05:15.571 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 141, frameCount = 142.
17-03-01 08:05:15.571 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 142
17-03-01 08:05:15.571 -08 000000020 INF: ===================Camera #0 Frame #142===================
17-03-01 08:05:15.599 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 142, frameCount = 143.
17-03-01 08:05:15.599 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 143
17-03-01 08:05:15.599 -08 000000122 INF: ===================Camera #2 Frame #143===================
17-03-01 08:05:15.601 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.728 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.741 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 148, frameCount = 149.
17-03-01 08:05:15.741 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 149
17-03-01 08:05:15.741 -08 000000020 INF: ===================Camera #0 Frame #149===================
17-03-01 08:05:15.770 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 149, frameCount = 150.
17-03-01 08:05:15.770 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 150
17-03-01 08:05:15.770 -08 000000122 INF: ===================Camera #2 Frame #150===================
17-03-01 08:05:15.864 -08 000000092 INF: Y Motor: Unshifted Position: 3256347
17-03-01 08:05:15.912 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 154, frameCount = 155.
17-03-01 08:05:15.912 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 155
17-03-01 08:05:15.912 -08 000000020 INF: ===================Camera #0 Frame #155===================
17-03-01 08:05:15.914 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:15.942 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 155, frameCount = 156.
17-03-01 08:05:15.942 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 156
17-03-01 08:05:15.942 -08 000000122 INF: ===================Camera #2 Frame #156===================
17-03-01 08:05:16.038 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:16.052 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:16.052 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:16.052 -08 000000018 INF: WaitCommand(10000) end
17-03-01 08:05:16.052 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:16.053 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Deblock===================
17-03-01 08:05:16.053 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle===================
17-03-01 08:05:16.054 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:16.054 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:16.055 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:16.055 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:16.080 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 160, frameCount = 161.
17-03-01 08:05:16.080 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 161
17-03-01 08:05:16.080 -08 000000020 INF: ===================Camera #0 Frame #161===================
17-03-01 08:05:16.111 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 161, frameCount = 162.
17-03-01 08:05:16.111 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 162
17-03-01 08:05:16.111 -08 000000122 INF: ===================Camera #2 Frame #162===================
17-03-01 08:05:16.114 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:16.114 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Selecting Reagent HB1 (4)===================
17-03-01 08:05:16.114 -08 000000018 INF: Valve A1: Go to position 4
17-03-01 08:05:16.114 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:05:16.176 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 7\r
17-03-01 08:05:16.176 -08 000000018 INF: Valve A1: 37.815 seconds since last move, > 10.000 seconds required between moves
17-03-01 08:05:16.176 -08 000000018 INF: Valve A1: Taking shortest path 'CC' from 7 to 4
17-03-01 08:05:16.176 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CC4\r
17-03-01 08:05:16.176 -08 000000018 INF: SerialPort A1 (VICIA1): Recv  (discarded)
17-03-01 08:05:16.176 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:05:16.177 -08 000000092 INF: Y Motor: Unshifted Position: 3052678
17-03-01 08:05:16.227 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:16.250 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 166, frameCount = 167.
17-03-01 08:05:16.250 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 167
17-03-01 08:05:16.250 -08 000000020 INF: ===================Camera #0 Frame #167===================
17-03-01 08:05:16.281 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:05:16.281 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:05:16.281 -08 000000122 INF: ===================Camera #2 Frame #169===================
17-03-01 08:05:16.351 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:16.420 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 173, frameCount = 174.
17-03-01 08:05:16.420 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 174
17-03-01 08:05:16.420 -08 000000020 INF: ===================Camera #0 Frame #174===================
17-03-01 08:05:16.455 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 174, frameCount = 175.
17-03-01 08:05:16.455 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 175
17-03-01 08:05:16.455 -08 000000122 INF: ===================Camera #2 Frame #175===================
17-03-01 08:05:16.487 -08 000000092 INF: Y Motor: Unshifted Position: 2850967
17-03-01 08:05:16.537 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:16.593 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 179, frameCount = 180.
17-03-01 08:05:16.593 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 180
17-03-01 08:05:16.593 -08 000000020 INF: ===================Camera #0 Frame #180===================
17-03-01 08:05:16.613 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 4\r
17-03-01 08:05:16.613 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:16.613 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Opening shutoff valve===================
17-03-01 08:05:16.626 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 180, frameCount = 181.
17-03-01 08:05:16.626 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 181
17-03-01 08:05:16.626 -08 000000122 INF: ===================Camera #2 Frame #181===================
17-03-01 08:05:16.664 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:16.763 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 185, frameCount = 186.
17-03-01 08:05:16.763 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 186
17-03-01 08:05:16.763 -08 000000020 INF: ===================Camera #0 Frame #186===================
17-03-01 08:05:16.795 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:05:16.795 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:05:16.795 -08 000000122 INF: ===================Camera #2 Frame #188===================
17-03-01 08:05:16.800 -08 000000092 INF: Y Motor: Unshifted Position: 2647522
17-03-01 08:05:16.850 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:16.933 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 192, frameCount = 193.
17-03-01 08:05:16.933 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 193
17-03-01 08:05:16.933 -08 000000020 INF: ===================Camera #0 Frame #193===================
17-03-01 08:05:16.967 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 193, frameCount = 194.
17-03-01 08:05:16.967 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 194
17-03-01 08:05:16.967 -08 000000122 INF: ===================Camera #2 Frame #194===================
17-03-01 08:05:16.974 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.104 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 198, frameCount = 199.
17-03-01 08:05:17.104 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 199
17-03-01 08:05:17.104 -08 000000020 INF: ===================Camera #0 Frame #199===================
17-03-01 08:05:17.113 -08 000000092 INF: Y Motor: Unshifted Position: 2443852
17-03-01 08:05:17.138 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 199, frameCount = 200.
17-03-01 08:05:17.138 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 200
17-03-01 08:05:17.138 -08 000000122 INF: ===================Camera #2 Frame #200===================
17-03-01 08:05:17.163 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.273 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 204, frameCount = 205.
17-03-01 08:05:17.273 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 205
17-03-01 08:05:17.273 -08 000000020 INF: ===================Camera #0 Frame #205===================
17-03-01 08:05:17.287 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.297 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:17.297 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:17.297 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:17.308 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 205, frameCount = 206.
17-03-01 08:05:17.308 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 206
17-03-01 08:05:17.308 -08 000000122 INF: ===================Camera #2 Frame #206===================
17-03-01 08:05:17.360 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:17.368 -08 000000018 INF: KloehnPump A (KLOEHNA): Pumping from 4, aspirate port PortB, aspiration rate 500, dispense rate 2500, volume 80, calling command "Pumping to Flowcell #1 pump index #0", State=Running, Depth=2, Children=0, Thread="Run", Parent="Buffer Wash", Type=SameThreadBlocking, solution delay 5000
17-03-01 08:05:17.423 -08 000000092 INF: Y Motor: Unshifted Position: 2242362
17-03-01 08:05:17.443 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 210, frameCount = 211.
17-03-01 08:05:17.443 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 211
17-03-01 08:05:17.443 -08 000000020 INF: ===================Camera #0 Frame #211===================
17-03-01 08:05:17.460 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:17.473 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.479 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 212, frameCount = 213.
17-03-01 08:05:17.479 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 213
17-03-01 08:05:17.479 -08 000000122 INF: ===================Camera #2 Frame #213===================
17-03-01 08:05:17.494 -08 000000104 INF: RunCopyService queue size at 3/1/2017 8:05:17 AM is 0
17-03-01 08:05:17.599 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`0 (0x03)\r\n(0xFF)
17-03-01 08:05:17.599 -08 000000018 INF: Current Position of Pump is: 0
17-03-01 08:05:17.614 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 217, frameCount = 218.
17-03-01 08:05:17.614 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 218
17-03-01 08:05:17.614 -08 000000020 INF: ===================Camera #0 Frame #218===================
17-03-01 08:05:17.650 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.652 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 218, frameCount = 219.
17-03-01 08:05:17.652 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 219
17-03-01 08:05:17.652 -08 000000122 INF: ===================Camera #2 Frame #219===================
17-03-01 08:05:17.699 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1OR\r
17-03-01 08:05:17.782 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:17.783 -08 000000092 INF: Y Motor: Unshifted Position: 2008137
17-03-01 08:05:17.787 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 223, frameCount = 224.
17-03-01 08:05:17.787 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 224
17-03-01 08:05:17.787 -08 000000020 INF: ===================Camera #0 Frame #224===================
17-03-01 08:05:17.823 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 224, frameCount = 225.
17-03-01 08:05:17.823 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 225
17-03-01 08:05:17.823 -08 000000122 INF: ===================Camera #2 Frame #225===================
17-03-01 08:05:17.833 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.882 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:17.956 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 229, frameCount = 230.
17-03-01 08:05:17.956 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 230
17-03-01 08:05:17.956 -08 000000020 INF: ===================Camera #0 Frame #230===================
17-03-01 08:05:17.957 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:17.968 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:17.994 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 231, frameCount = 232.
17-03-01 08:05:17.994 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 232
17-03-01 08:05:17.994 -08 000000122 INF: ===================Camera #2 Frame #232===================
17-03-01 08:05:18.094 -08 000000092 INF: Y Motor: Unshifted Position: 1804689
17-03-01 08:05:18.126 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 236, frameCount = 237.
17-03-01 08:05:18.126 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 237
17-03-01 08:05:18.126 -08 000000020 INF: ===================Camera #0 Frame #237===================
17-03-01 08:05:18.144 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:18.169 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 237, frameCount = 238.
17-03-01 08:05:18.169 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 238
17-03-01 08:05:18.169 -08 000000122 INF: ===================Camera #2 Frame #238===================
17-03-01 08:05:18.218 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:18.271 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:18.282 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:18.302 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 242, frameCount = 243.
17-03-01 08:05:18.302 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 243
17-03-01 08:05:18.302 -08 000000020 INF: ===================Camera #0 Frame #243===================
17-03-01 08:05:18.340 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 243, frameCount = 244.
17-03-01 08:05:18.340 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 244
17-03-01 08:05:18.340 -08 000000122 INF: ===================Camera #2 Frame #244===================
17-03-01 08:05:18.382 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V10000A0R\r
17-03-01 08:05:18.407 -08 000000092 INF: Y Motor: Unshifted Position: 1602326
17-03-01 08:05:18.457 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:18.468 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:18.474 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 248, frameCount = 249.
17-03-01 08:05:18.474 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 249
17-03-01 08:05:18.474 -08 000000020 INF: ===================Camera #0 Frame #249===================
17-03-01 08:05:18.511 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 250, frameCount = 251.
17-03-01 08:05:18.511 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 251
17-03-01 08:05:18.511 -08 000000122 INF: ===================Camera #2 Frame #251===================
17-03-01 08:05:18.568 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:18.581 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:18.646 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 255, frameCount = 256.
17-03-01 08:05:18.646 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 256
17-03-01 08:05:18.646 -08 000000020 INF: ===================Camera #0 Frame #256===================
17-03-01 08:05:18.654 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:18.654 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Aspirating port PortB===================
17-03-01 08:05:18.685 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 256, frameCount = 257.
17-03-01 08:05:18.685 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 257
17-03-01 08:05:18.685 -08 000000122 INF: ===================Camera #2 Frame #257===================
17-03-01 08:05:18.719 -08 000000092 INF: Y Motor: Unshifted Position: 1400822
17-03-01 08:05:18.754 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V1600IP15360R\r
17-03-01 08:05:18.769 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:18.821 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 261, frameCount = 262.
17-03-01 08:05:18.821 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 262
17-03-01 08:05:18.821 -08 000000020 INF: ===================Camera #0 Frame #262===================
17-03-01 08:05:18.843 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:18.856 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 262, frameCount = 263.
17-03-01 08:05:18.856 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 263
17-03-01 08:05:18.856 -08 000000122 INF: ===================Camera #2 Frame #263===================
17-03-01 08:05:18.894 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:18.943 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:18.992 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 267, frameCount = 268.
17-03-01 08:05:18.992 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 268
17-03-01 08:05:18.992 -08 000000020 INF: ===================Camera #0 Frame #268===================
17-03-01 08:05:19.027 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:05:19.027 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 270
17-03-01 08:05:19.027 -08 000000122 INF: ===================Camera #2 Frame #270===================
17-03-01 08:05:19.031 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:19.032 -08 000000092 INF: Y Motor: Unshifted Position: 1197795
17-03-01 08:05:19.082 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:19.155 -08 000000031 INF: FPGA: Recv TDIYWAIT
17-03-01 08:05:19.155 -08 000000144 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:19.157 -08 000000144 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:05:19.158 -08 000000124 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:05:19.158 -08 000000069 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:05:19.158 -08 000000124 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:05:19.158 -08 000000124 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:05:19.158 -08 000000124 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:05:19.158 -08 000000069 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:05:19.158 -08 000000124 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:05:19.158 -08 000000069 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:05:19.158 -08 000000069 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:05:19.159 -08 000000069 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:05:19.164 -08 000000020 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:19.164 -08 000000020 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:19.164 -08 000000020 INF: ===================Camera #0 Frame #272===================
17-03-01 08:05:19.178 -08 000000020 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:19.179 -08 000000020 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:19.207 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:19.281 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:19.342 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:19.344 -08 000000092 INF: Y Motor: Unshifted Position: 998764
17-03-01 08:05:19.358 -08 000000020 INF: Camera #0 ReleaseBuffer
17-03-01 08:05:19.358 -08 000000122 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:19.358 -08 000000122 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:19.358 -08 000000122 INF: ===================Camera #2 Frame #272===================
17-03-01 08:05:19.358 -08 000000020 INF: ===================Camera TDI===================
17-03-01 08:05:19.365 -08 000000122 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:19.366 -08 000000122 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:19.392 -08 000000020 INF: ======================================
17-03-01 08:05:19.394 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:19.529 -08 000000059 INF: FPGA: Recv EX1MV
17-03-01 08:05:19.529 -08 000000059 INF: FPGA: Recv EX2MV
17-03-01 08:05:19.529 -08 000000124 INF: Excitation Filter 1: Moved 107 steps in 370.9452 ms
17-03-01 08:05:19.529 -08 000000124 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 371.0551 ms
17-03-01 08:05:19.529 -08 000000124 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 371.1276 ms
17-03-01 08:05:19.529 -08 000000069 INF: Excitation Filter 2: Moved 107 steps in 370.8045 ms
17-03-01 08:05:19.529 -08 000000069 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 371.2444 ms
17-03-01 08:05:19.529 -08 000000069 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 371.3128 ms
17-03-01 08:05:19.529 -08 000000124 INF: ======================================
17-03-01 08:05:19.530 -08 000000069 INF: ======================================
17-03-01 08:05:19.531 -08 000000092 INF: Y Motor: Unshifted Position: 992372
17-03-01 08:05:19.531 -08 000000092 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:19.531 -08 000000092 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:19.531 -08 000000144 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:19.532 -08 000000144 INF: ======================================
17-03-01 08:05:19.566 -08 000000122 INF: Camera #2 ReleaseBuffer
17-03-01 08:05:19.566 -08 000000122 INF: ===================Camera TDI===================
17-03-01 08:05:19.592 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:19.593 -08 000000092 INF: Y Motor: Recv v 0\r
17-03-01 08:05:19.593 -08 000000092 INF: Y Motor: Moved to 14.9237 after 7908 ms
17-03-01 08:05:19.593 -08 000000092 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:19.601 -08 000000122 INF: ======================================
17-03-01 08:05:19.602 -08 000000097 INF: ===================Camera TDI===================
17-03-01 08:05:19.603 -08 000000097 INF: ======================================
17-03-01 08:05:19.653 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:19.654 -08 000000092 INF: Y Motor: Recv v 4097\r
17-03-01 08:05:19.654 -08 000000092 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:19.654 -08 000000092 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:19.716 -08 000000092 INF: Y Motor: Recv v 0\r
17-03-01 08:05:19.716 -08 000000092 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:19.716 -08 000000092 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:19.780 -08 000000092 INF: Y Motor: Recv v 134217728\r
17-03-01 08:05:19.780 -08 000000092 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:05:19.780 -08 000000092 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:19.780 -08 000000092 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:19.842 -08 000000092 INF: Y Motor: Recv v 0\r
17-03-01 08:05:19.842 -08 000000092 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:19.842 -08 000000092 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:19.842 -08 000000092 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:19.903 -08 000000092 INF: Y Motor: Recv ok\r
17-03-01 08:05:19.903 -08 000000092 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:19.903 -08 000000092 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:19.903 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:19.968 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:19.969 -08 000000092 INF: Y Motor: Recv ok\r
17-03-01 08:05:19.969 -08 000000092 INF: ======================================
17-03-01 08:05:19.970 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:19.971 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:19.972 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:19.972 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:05:20.028 -08 000000113 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:05:20.029 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:20.091 -08 000000088 INF: FPGA: Recv TDIYERD 1492374
17-03-01 08:05:20.091 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:05:20.153 -08 000000144 INF: FPGA: Recv ZADCR 35110
17-03-01 08:05:20.153 -08 000000042 INF: At scan end Y pos = 14.924 and Z pos = -0.134. Y moved -48.539 mm
17-03-01 08:05:20.153 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:05:20.215 -08 000000104 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:05:20.215 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:05:20.215 -08 000000042 INF: TDIScan finished after 12706.2646 ms
17-03-01 08:05:20.215 -08 000000042 INF: Image[0]: Y should trigger at 63.463 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:05:20.215 -08 000000042 INF: Image[2]: Y should trigger at 63.463 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:05:20.217 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.218 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:20.253 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.719 um
17-03-01 08:05:20.253 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.254 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:05:20.277 -08 000000064 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:05:20.278 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:20.278 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.278 -08 000000097 INF: ===================Dither Clean Up Command===================
17-03-01 08:05:20.278 -08 000000140 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:05:20.278 -08 000000121 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:05:20.278 -08 000000092 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:05:20.279 -08 000000092 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:05:20.279 -08 000000140 INF: ======================================
17-03-01 08:05:20.279 -08 000000092 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:05:20.279 -08 000000121 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:20.279 -08 000000121 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:20.279 -08 000000122 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:20.279 -08 000000111 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:20.280 -08 000000122 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:05:20.282 -08 000000111 INF: ===================LFT:Extracting coords===================
17-03-01 08:05:20.307 -08 000000111 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:20.308 -08 000000111 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:05:20.309 -08 000000065 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.309 -08 000000130 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.309 -08 000000088 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.309 -08 000000065 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:20.309 -08 000000148 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.309 -08 000000130 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:20.309 -08 000000088 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:20.310 -08 000000148 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:20.338 -08 000000020 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:20.338 -08 000000020 INF: FPGA: Recv ZSEL 
17-03-01 08:05:20.338 -08 000000122 INF: FPGA: Xmit ZDACW 40331\n
17-03-01 08:05:20.338 -08 000000092 INF: ======================================
17-03-01 08:05:20.340 -08 000000121 INF: Y Motor: Recv ok\r
17-03-01 08:05:20.340 -08 000000121 INF: ======================================
17-03-01 08:05:20.384 -08 000000088 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:20.384 -08 000000130 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:20.384 -08 000000148 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:20.384 -08 000000065 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:20.404 -08 000000124 INF: FPGA: Recv ZDACW 
17-03-01 08:05:20.404 -08 000000122 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:05:20.405 -08 000000122 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:05:20.465 -08 000000104 INF: FPGA: Recv TDIBB
17-03-01 08:05:20.465 -08 000000122 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:20.466 -08 000000122 INF: ======================================
17-03-01 08:05:20.528 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:20.535 -08 000000088 INF: LFT found best fwhm score 2.105376 in 151 ms
17-03-01 08:05:20.535 -08 000000088 INF: LFT found good score at index 7857 with fwhm value 2.105376. Next cycle, cycle 53 starting Z position for top surface is at -0.156 mm FC:B, C:52,L:3,T
17-03-01 08:05:20.535 -08 000000148 INF: LFT found best fwhm score 2.001155 in 151 ms
17-03-01 08:05:20.535 -08 000000148 INF: LFT found good score at index 1533 with fwhm value 2.001155. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:3,T
17-03-01 08:05:20.535 -08 000000088 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.535 -08 000000130 INF: LFT found best fwhm score 2.000246 in 151 ms
17-03-01 08:05:20.535 -08 000000130 INF: LFT found good score at index 1021 with fwhm value 2.000246. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:3,T
17-03-01 08:05:20.535 -08 000000148 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.536 -08 000000088 INF: ======================================
17-03-01 08:05:20.536 -08 000000130 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.536 -08 000000148 INF: ======================================
17-03-01 08:05:20.536 -08 000000065 INF: LFT found best fwhm score 2.000029 in 152 ms
17-03-01 08:05:20.536 -08 000000065 INF: LFT found good score at index 1753 with fwhm value 2.000029. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:3,T
17-03-01 08:05:20.536 -08 000000130 INF: ======================================
17-03-01 08:05:20.536 -08 000000065 INF: ===================LookupFocusTracking===================
17-03-01 08:05:20.536 -08 000000065 INF: ======================================
17-03-01 08:05:20.538 -08 000000111 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:20.538 -08 000000111 INF: LFT weighted average best Z for top surface is at -0.157mm FC:B, C:52,L:3,T
17-03-01 08:05:20.539 -08 000000111 INF: ======================================
17-03-01 08:05:20.540 -08 000000097 INF: ======================================
17-03-01 08:05:20.541 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:05:20.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:05:20.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:05:20.542 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.543 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:05:20.543 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.543 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308===================
17-03-01 08:05:20.543 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308===================
17-03-01 08:05:20.544 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Aspirating port PortB, Waiting for image analysis===================
17-03-01 08:05:20.544 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Aspirating port PortB===================
17-03-01 08:05:20.544 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:05:20.544 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 1 - X = 74.16164 Y = 39.76308===================
17-03-01 08:05:20.567 -08 000000042 INF: Waited 23 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 0, buffer wait time 0
17-03-01 08:05:20.568 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:20.568 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308===================
17-03-01 08:05:20.568 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:20.568 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308===================
17-03-01 08:05:20.569 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:05:20.569 -08 000000042 INF: Transformed XStagePosition from 75.26964 mm to 75.2403130624443 mm.
17-03-01 08:05:20.581 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5720643562973 mm.
17-03-01 08:05:20.581 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3720643562973 mm.
17-03-01 08:05:20.581 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4628143562973 mm.
17-03-01 08:05:20.583 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.584 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:05:20.584 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:20.584 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -153.9 um, section = C_1
17-03-01 08:05:20.587 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:20.588 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:20.589 -08 000000125 INF: ===================MoveEmissionFilters===================
17-03-01 08:05:20.593 -08 000000124 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:20.594 -08 000000124 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:20.596 -08 000000092 INF: ===================Move X,Y===================
17-03-01 08:05:20.597 -08 000000092 INF: ===================Move X,Y, Parallel===================
17-03-01 08:05:20.641 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:20.654 -08 000000087 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1102 Request: {"Cycle":52,"Lane":3,"Tile":1102,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF255","HCSMMF216","HCSMMF212"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.672 -08 000000105 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:05:20.672 -08 000000116 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:20.672 -08 000000111 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:05:20.673 -08 000000105 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:05:20.673 -08 000000117 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:20.673 -08 000000105 INF: ======================================
17-03-01 08:05:20.673 -08 000000146 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:20.673 -08 000000117 INF: Y Motor: Moving to 64.5721 mm @25.000 mm/sec, started at 14.9237 mm
17-03-01 08:05:20.674 -08 000000117 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:20.674 -08 000000111 INF: ======================================
17-03-01 08:05:20.674 -08 000000117 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:20.679 -08 000000054 INF: ===================Move X Motor without settling===================
17-03-01 08:05:20.680 -08 000000067 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:20.680 -08 000000116 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:20.680 -08 000000054 INF: X Motor: Xmit PR VM\n
17-03-01 08:05:20.681 -08 000000067 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:20.682 -08 000000121 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:05:20.682 -08 000000040 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:20.682 -08 000000121 INF: ======================================
17-03-01 08:05:20.683 -08 000000146 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:05:20.683 -08 000000040 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:20.683 -08 000000146 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:05:20.683 -08 000000146 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:20.685 -08 000000146 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:05:20.686 -08 000000150 INF: ===================TDI Scan Setup===================
17-03-01 08:05:20.686 -08 000000150 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:20.687 -08 000000150 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:20.688 -08 000000150 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:20.688 -08 000000150 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:05:20.689 -08 000000144 INF: ===================Camera Arm TDI===================
17-03-01 08:05:20.690 -08 000000144 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:20.691 -08 000000144 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:20.703 -08 000000121 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:05:20.704 -08 000000097 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:05:20.704 -08 000000121 INF: ======================================
17-03-01 08:05:20.704 -08 000000097 INF: ======================================
17-03-01 08:05:20.706 -08 000000121 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:05:20.707 -08 000000097 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:05:20.707 -08 000000121 INF: ======================================
17-03-01 08:05:20.707 -08 000000097 INF: ======================================
17-03-01 08:05:20.708 -08 000000133 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:05:20.709 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:05:20.709 -08 000000117 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:20.709 -08 000000117 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:20.709 -08 000000067 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:20.709 -08 000000133 INF: ======================================
17-03-01 08:05:20.711 -08 000000116 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:20.712 -08 000000116 INF: ======================================
17-03-01 08:05:20.713 -08 000000067 INF: ======================================
17-03-01 08:05:20.713 -08 000000124 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:20.714 -08 000000124 INF: ======================================
17-03-01 08:05:20.730 -08 000000040 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:20.732 -08 000000040 INF: ======================================
17-03-01 08:05:20.735 -08 000000125 INF: ======================================
17-03-01 08:05:20.763 -08 000000106 INF: FPGA: Recv ZSEL 
17-03-01 08:05:20.766 -08 000000054 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:05:20.766 -08 000000054 INF: X Motor: Xmit PR VI\n
17-03-01 08:05:20.767 -08 000000150 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:20.767 -08 000000150 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:05:20.768 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:05:20.768 -08 000000117 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:20.791 -08 000000068 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1106 Request: {"Cycle":52,"Lane":3,"Tile":1106,"Channels":["T","C","G","A"],"MemoryMappedFileNames":["HCSMMF251","HCSMMF194","HCSMMF265","HCSMMF235"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.796 -08 000000062 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1103 Request: {"Cycle":52,"Lane":3,"Tile":1103,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF203","HCSMMF197","HCSMMF202","HCSMMF252"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.799 -08 000000113 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1107 Request: {"Cycle":52,"Lane":3,"Tile":1107,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF207","HCSMMF196","HCSMMF195","HCSMMF218"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.800 -08 000000118 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1104 Request: {"Cycle":52,"Lane":3,"Tile":1104,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF201","HCSMMF229","HCSMMF177","HCSMMF256"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.801 -08 000000112 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1112 Request: {"Cycle":52,"Lane":3,"Tile":1112,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF259","HCSMMF222","HCSMMF221","HCSMMF283"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.802 -08 000000109 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1105 Request: {"Cycle":52,"Lane":3,"Tile":1105,"Channels":["C","G","A","T"],"MemoryMappedFileNames":["HCSMMF241","HCSMMF254","HCSMMF257","HCSMMF198"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.803 -08 000000031 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1110 Request: {"Cycle":52,"Lane":3,"Tile":1110,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF189","HCSMMF217","HCSMMF199","HCSMMF227"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.804 -08 000000036 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1113 Request: {"Cycle":52,"Lane":3,"Tile":1113,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF243","HCSMMF247","HCSMMF250","HCSMMF269"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.805 -08 000000151 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1108 Request: {"Cycle":52,"Lane":3,"Tile":1108,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF246","HCSMMF192","HCSMMF258","HCSMMF266"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.806 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1101 Request: {"Cycle":52,"Lane":3,"Tile":1101,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF279","HCSMMF267","HCSMMF281","HCSMMF284"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.807 -08 000000130 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1111 Request: {"Cycle":52,"Lane":3,"Tile":1111,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF188","HCSMMF239","HCSMMF230","HCSMMF270"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.807 -08 000000135 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1114 Request: {"Cycle":52,"Lane":3,"Tile":1114,"Channels":["G","T","C","A"],"MemoryMappedFileNames":["HCSMMF237","HCSMMF268","HCSMMF208","HCSMMF285"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.808 -08 000000137 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1116 Request: {"Cycle":52,"Lane":3,"Tile":1116,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF278","HCSMMF223","HCSMMF226","HCSMMF271"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.809 -08 000000097 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1121 Request: {"Cycle":52,"Lane":3,"Tile":1121,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF214","HCSMMF185","HCSMMF184","HCSMMF211"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.810 -08 000000089 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1119 Request: {"Cycle":52,"Lane":3,"Tile":1119,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF220","HCSMMF183","HCSMMF182","HCSMMF190"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.811 -08 000000104 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1109 Request: {"Cycle":52,"Lane":3,"Tile":1109,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF225","HCSMMF232","HCSMMF179","HCSMMF209"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.812 -08 000000088 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1125 Request: {"Cycle":52,"Lane":3,"Tile":1125,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF204","HCSMMF272","HCSMMF181","HCSMMF236"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.812 -08 000000096 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1117 Request: {"Cycle":52,"Lane":3,"Tile":1117,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF191","HCSMMF215","HCSMMF219","HCSMMF193"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.813 -08 000000148 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1122 Request: {"Cycle":52,"Lane":3,"Tile":1122,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF245","HCSMMF213","HCSMMF276","HCSMMF273"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.815 -08 000000032 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1118 Request: {"Cycle":52,"Lane":3,"Tile":1118,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF261","HCSMMF210","HCSMMF287","HCSMMF178"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.815 -08 000000145 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1115 Request: {"Cycle":52,"Lane":3,"Tile":1115,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF275","HCSMMF274","HCSMMF200","HCSMMF280"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.817 -08 000000154 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1120 Request: {"Cycle":52,"Lane":3,"Tile":1120,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF180","HCSMMF242","HCSMMF248","HCSMMF187"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.817 -08 000000020 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1124 Request: {"Cycle":52,"Lane":3,"Tile":1124,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF282","HCSMMF286","HCSMMF240","HCSMMF224"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.819 -08 000000133 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1128 Request: {"Cycle":52,"Lane":3,"Tile":1128,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF206","HCSMMF231","HCSMMF253","HCSMMF263"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.819 -08 000000116 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1127 Request: {"Cycle":52,"Lane":3,"Tile":1127,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF228","HCSMMF244","HCSMMF186","HCSMMF262"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.820 -08 000000124 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1123 Request: {"Cycle":52,"Lane":3,"Tile":1123,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF176","HCSMMF277","HCSMMF260","HCSMMF233"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.822 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1126 Request: {"Cycle":52,"Lane":3,"Tile":1126,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF249","HCSMMF205","HCSMMF238","HCSMMF234"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:20.824 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:20.825 -08 000000125 INF: FPGA: Recv TDIBB
17-03-01 08:05:20.825 -08 000000150 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:20.827 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:05:20.827 -08 000000150 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:20.827 -08 000000117 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:20.827 -08 000000117 INF: Y Motor: Set target position to 5957206 encoder counts
17-03-01 08:05:20.827 -08 000000117 INF: Y Motor: Xmit s r0xca 5957206\r
17-03-01 08:05:20.827 -08 000000150 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:20.829 -08 000000054 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:05:20.829 -08 000000054 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:05:20.829 -08 000000054 INF: X Motor: Moving to 75.2403 mm @15.000 mm/sec, started at 74.1416 mm
17-03-01 08:05:20.829 -08 000000150 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:05:20.829 -08 000000054 INF: X Motor: Xmit MA 6652\n
17-03-01 08:05:20.829 -08 000000150 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:05:20.829 -08 000000150 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:05:20.831 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:05:20.884 -08 000000145 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:20.884 -08 000000150 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:20.886 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:05:20.886 -08 000000054 INF: X Motor: Recv MA 6652\r\n>
17-03-01 08:05:20.886 -08 000000117 INF: Y Motor: Start the move command
17-03-01 08:05:20.886 -08 000000117 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:20.886 -08 000000150 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:05:20.886 -08 000000054 INF: X Motor: WaitUntilStopped 60073
17-03-01 08:05:20.886 -08 000000150 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:20.888 -08 000000150 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:05:20.888 -08 000000150 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:05:20.888 -08 000000150 INF: Z Motor: Arming to move to -0.1139 mm
17-03-01 08:05:20.888 -08 000000150 INF: FPGA: Xmit ZYT 6437206 4\n
17-03-01 08:05:20.891 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:20.922 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:20.922 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:05:20.949 -08 000000036 INF: FPGA: Recv ZYT 
17-03-01 08:05:20.949 -08 000000150 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492372 enc / 14.924 mm / ) = 6437206 enc / 64.372 mm
17-03-01 08:05:20.949 -08 000000150 INF: FPGA: Xmit ZARM 29846\n
17-03-01 08:05:20.950 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:20.951 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:05:20.951 -08 000000117 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:05:20.951 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:20.959 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:20.965 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:05:21.010 -08 000000084 INF: FPGA: Recv ZARM
17-03-01 08:05:21.010 -08 000000150 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 60.7498 ms
17-03-01 08:05:21.010 -08 000000150 INF: Z Motor: ArmAbsStepped took 121.6319 ms
17-03-01 08:05:21.010 -08 000000150 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:21.012 -08 000000150 INF: ===================TDI Scan Setup===================
17-03-01 08:05:21.013 -08 000000150 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:05:21.014 -08 000000150 INF: ===================TDI Scan Setup===================
17-03-01 08:05:21.015 -08 000000150 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:05:21.016 -08 000000150 INF: ===================TDI Scan Setup===================
17-03-01 08:05:21.017 -08 000000150 INF: ======================================
17-03-01 08:05:21.068 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:21.074 -08 000000117 INF: Y Motor: Unshifted Position: 1077747
17-03-01 08:05:21.074 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:05:21.124 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:21.167 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:21.173 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:05:21.200 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:21.249 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:21.262 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:21.283 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:21.288 -08 000000144 INF: Camera #0 AttachBuffer (imageDataPtr = 60599242800 imgPtr = 60599242800 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:21.288 -08 000000144 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:21.289 -08 000000144 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:21.304 -08 000000144 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:21.306 -08 000000144 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:21.387 -08 000000117 INF: Y Motor: Unshifted Position: 1787368
17-03-01 08:05:21.437 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:21.510 -08 000000054 INF: X Motor: Xmit PR ER\n
17-03-01 08:05:21.512 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:21.560 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:21.573 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:21.574 -08 000000054 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:05:21.574 -08 000000054 INF: X Motor: Moved to 75.2402 after 688 ms
17-03-01 08:05:21.574 -08 000000054 INF: ======================================
17-03-01 08:05:21.591 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:05:21.697 -08 000000117 INF: Y Motor: Unshifted Position: 2564900
17-03-01 08:05:21.747 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:21.823 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:21.875 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:21.893 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:21.906 -08 000000144 INF: Camera #2 AttachBuffer (imageDataPtr = 62411182128 imgPtr = 63317151792 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:21.906 -08 000000144 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:21.906 -08 000000144 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:21.922 -08 000000144 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:21.924 -08 000000144 INF: ===================Camera Arm TDI===================
17-03-01 08:05:21.925 -08 000000144 INF: ======================================
17-03-01 08:05:21.926 -08 000000146 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:21.927 -08 000000146 INF: ======================================
17-03-01 08:05:22.009 -08 000000117 INF: Y Motor: Unshifted Position: 3349832
17-03-01 08:05:22.059 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:22.143 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:22.184 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:22.195 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:22.322 -08 000000117 INF: Y Motor: Unshifted Position: 4129081
17-03-01 08:05:22.372 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:22.445 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:22.498 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:22.507 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:22.637 -08 000000117 INF: Y Motor: Unshifted Position: 4914023
17-03-01 08:05:22.687 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:22.757 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:22.810 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:22.821 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:22.945 -08 000000117 INF: Y Motor: Unshifted Position: 5682578
17-03-01 08:05:22.995 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:23.071 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:23.123 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:23.131 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:23.259 -08 000000117 INF: Y Motor: Unshifted Position: 5957209
17-03-01 08:05:23.259 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:23.259 -08 000000117 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:23.322 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:05:23.322 -08 000000117 INF: Y Motor: Moved to 64.5721 after 2371 ms
17-03-01 08:05:23.322 -08 000000117 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:23.381 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:23.384 -08 000000117 INF: Y Motor: Recv v 4096\r
17-03-01 08:05:23.384 -08 000000117 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:23.384 -08 000000117 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:23.443 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:23.444 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:05:23.444 -08 000000117 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:23.444 -08 000000117 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:23.508 -08 000000117 INF: Y Motor: Recv v 402653184\r
17-03-01 08:05:23.508 -08 000000117 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:05:23.508 -08 000000117 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:23.508 -08 000000117 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:23.571 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:05:23.571 -08 000000117 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:23.571 -08 000000117 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:23.571 -08 000000117 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:23.632 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:05:23.632 -08 000000117 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:23.632 -08 000000117 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:23.693 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:23.694 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:05:23.694 -08 000000117 INF: ======================================
17-03-01 08:05:23.695 -08 000000092 INF: ===================Move X,Y===================
17-03-01 08:05:23.696 -08 000000092 INF: ======================================
17-03-01 08:05:23.697 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:23.698 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:23.698 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:05:23.698 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:05:23.757 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:23.758 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:05:23.758 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:05:23.818 -08 000000067 INF: FPGA: Recv ZFREQCL
17-03-01 08:05:23.819 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:05:23.819 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:23.819 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:23.884 -08 000000032 INF: FPGA: Recv TDIYERD 6457208
17-03-01 08:05:23.884 -08 000000042 INF: Before scan, Y encoder from FPGA = 6457208 counts (64.572 mm)
17-03-01 08:05:23.884 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:23.885 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:23.886 -08 000000154 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:23.886 -08 000000096 INF: ===================Set YMotor gains for scans===================
17-03-01 08:05:23.886 -08 000000096 INF: ======================================
17-03-01 08:05:23.886 -08 000000154 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:23.887 -08 000000154 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:05:23.887 -08 000000154 INF: FPGA: Xmit TDIYPOS 6346281\n
17-03-01 08:05:23.943 -08 000000122 INF: FPGA: Recv TDIYPOS
17-03-01 08:05:23.943 -08 000000154 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:23.945 -08 000000154 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:05:23.945 -08 000000154 INF: FPGA: Xmit TDIYARM3 139264 6437206 1 1\n
17-03-01 08:05:24.005 -08 000000135 INF: FPGA: Recv TDIYARM3
17-03-01 08:05:24.005 -08 000000154 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:24.007 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:24.007 -08 000000154 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:24.008 -08 000000154 INF: ======================================
17-03-01 08:05:24.009 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:24.009 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:24.009 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:24.010 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:24.011 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:24.011 -08 000000106 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:05:24.011 -08 000000133 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:05:24.012 -08 000000106 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:05:24.012 -08 000000106 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:05:24.012 -08 000000106 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:05:24.012 -08 000000133 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:05:24.012 -08 000000106 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:05:24.012 -08 000000133 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:05:24.012 -08 000000133 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:05:24.013 -08 000000133 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:05:24.068 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:24.318 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:24.380 -08 000000035 INF: FPGA: Recv EX1MV
17-03-01 08:05:24.380 -08 000000035 INF: FPGA: Recv EX2MV
17-03-01 08:05:24.380 -08 000000133 INF: Excitation Filter 2: Moved -107 steps in 368.232 ms
17-03-01 08:05:24.380 -08 000000106 INF: Excitation Filter 1: Moved -107 steps in 368.4274 ms
17-03-01 08:05:24.380 -08 000000133 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 368.3927 ms
17-03-01 08:05:24.380 -08 000000133 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 368.5038 ms
17-03-01 08:05:24.380 -08 000000106 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 368.5452 ms
17-03-01 08:05:24.380 -08 000000106 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 368.7277 ms
17-03-01 08:05:24.380 -08 000000133 INF: ======================================
17-03-01 08:05:24.381 -08 000000106 INF: ======================================
17-03-01 08:05:24.381 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:24.382 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:24.383 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:24.384 -08 000000062 INF: ===================Camera TDI===================
17-03-01 08:05:24.384 -08 000000036 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:24.384 -08 000000118 INF: ===================FPGA Z Wait===================
17-03-01 08:05:24.384 -08 000000124 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:24.384 -08 000000118 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:05:24.384 -08 000000124 INF: Y Motor: Moving to 14.9237 mm @6.500 mm/sec, started at 64.5721 mm
17-03-01 08:05:24.384 -08 000000062 INF: ===================Camera TDI, Parallel===================
17-03-01 08:05:24.385 -08 000000124 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:24.385 -08 000000124 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:24.385 -08 000000036 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:05:24.385 -08 000000036 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:05:24.385 -08 000000145 INF: ===================Camera TDI===================
17-03-01 08:05:24.385 -08 000000093 INF: ===================Camera TDI===================
17-03-01 08:05:24.387 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:24.388 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:24.388 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:24.388 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:24.445 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:05:24.445 -08 000000124 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:24.445 -08 000000124 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:24.505 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:05:24.505 -08 000000124 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:24.538 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:24.538 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:24.539 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:24.539 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:24.571 -08 000000124 INF: Y Motor: Recv v 0\r
17-03-01 08:05:24.571 -08 000000124 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:24.571 -08 000000124 INF: Y Motor: Set target position to 992373 encoder counts
17-03-01 08:05:24.571 -08 000000124 INF: Y Motor: Xmit s r0xca 992373\r
17-03-01 08:05:24.632 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:24.634 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:05:24.634 -08 000000124 INF: Y Motor: Start the move command
17-03-01 08:05:24.634 -08 000000124 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:24.688 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:24.688 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:24.690 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:24.690 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:24.691 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:24.692 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:05:24.692 -08 000000124 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:05:24.692 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:24.756 -08 000000148 INF: FPGA: Recv ZWAIT 
17-03-01 08:05:24.756 -08 000000118 INF: ======================================
17-03-01 08:05:24.825 -08 000000124 INF: Y Motor: Unshifted Position: 5897738
17-03-01 08:05:24.840 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 3, frameCount = 4.
17-03-01 08:05:24.840 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 4
17-03-01 08:05:24.840 -08 000000145 INF: ===================Camera #0 Frame #4===================
17-03-01 08:05:24.841 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:24.841 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:24.842 -08 000000093 INF: ===================Camera #2 Frame #5===================
17-03-01 08:05:24.875 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:24.941 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:24.995 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.002 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 9, frameCount = 10.
17-03-01 08:05:25.002 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 10
17-03-01 08:05:25.002 -08 000000145 INF: ===================Camera #0 Frame #10===================
17-03-01 08:05:25.003 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:25.013 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:25.013 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:25.013 -08 000000093 INF: ===================Camera #2 Frame #11===================
17-03-01 08:05:25.130 -08 000000124 INF: Y Motor: Unshifted Position: 5695581
17-03-01 08:05:25.170 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:05:25.170 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:05:25.170 -08 000000145 INF: ===================Camera #0 Frame #17===================
17-03-01 08:05:25.180 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.182 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:05:25.182 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:05:25.182 -08 000000093 INF: ===================Camera #2 Frame #17===================
17-03-01 08:05:25.253 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:25.304 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.315 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:25.352 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 22, frameCount = 23.
17-03-01 08:05:25.352 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 23
17-03-01 08:05:25.352 -08 000000145 INF: ===================Camera #0 Frame #23===================
17-03-01 08:05:25.360 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:05:25.360 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:05:25.360 -08 000000093 INF: ===================Camera #2 Frame #24===================
17-03-01 08:05:25.442 -08 000000124 INF: Y Motor: Unshifted Position: 5492792
17-03-01 08:05:25.492 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.520 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 28, frameCount = 29.
17-03-01 08:05:25.520 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 29
17-03-01 08:05:25.520 -08 000000145 INF: ===================Camera #0 Frame #29===================
17-03-01 08:05:25.535 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:05:25.535 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:05:25.535 -08 000000093 INF: ===================Camera #2 Frame #30===================
17-03-01 08:05:25.566 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:25.617 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.627 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:25.696 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 35, frameCount = 36.
17-03-01 08:05:25.696 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 36
17-03-01 08:05:25.696 -08 000000145 INF: ===================Camera #0 Frame #36===================
17-03-01 08:05:25.714 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:25.714 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:25.714 -08 000000093 INF: ===================Camera #2 Frame #37===================
17-03-01 08:05:25.755 -08 000000124 INF: Y Motor: Unshifted Position: 5289123
17-03-01 08:05:25.805 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.874 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:25.874 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:25.874 -08 000000145 INF: ===================Camera #0 Frame #43===================
17-03-01 08:05:25.877 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:25.891 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:25.891 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:25.891 -08 000000093 INF: ===================Camera #2 Frame #43===================
17-03-01 08:05:25.928 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:25.941 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:26.055 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 48, frameCount = 49.
17-03-01 08:05:26.055 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 49
17-03-01 08:05:26.055 -08 000000145 INF: ===================Camera #0 Frame #49===================
17-03-01 08:05:26.060 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 48, frameCount = 49.
17-03-01 08:05:26.060 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 49
17-03-01 08:05:26.060 -08 000000093 INF: ===================Camera #2 Frame #49===================
17-03-01 08:05:26.068 -08 000000124 INF: Y Motor: Unshifted Position: 5086967
17-03-01 08:05:26.118 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:26.191 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:26.224 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 54, frameCount = 55.
17-03-01 08:05:26.224 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 55
17-03-01 08:05:26.224 -08 000000145 INF: ===================Camera #0 Frame #55===================
17-03-01 08:05:26.229 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:05:26.229 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:05:26.229 -08 000000093 INF: ===================Camera #2 Frame #56===================
17-03-01 08:05:26.240 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:26.251 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:26.379 -08 000000124 INF: Y Motor: Unshifted Position: 4883302
17-03-01 08:05:26.392 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:26.392 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:26.392 -08 000000145 INF: ===================Camera #0 Frame #62===================
17-03-01 08:05:26.401 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:26.401 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:26.401 -08 000000093 INF: ===================Camera #2 Frame #62===================
17-03-01 08:05:26.429 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:26.501 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:26.552 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:26.563 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:26.563 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:26.563 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:26.563 -08 000000145 INF: ===================Camera #0 Frame #68===================
17-03-01 08:05:26.570 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:26.570 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:26.570 -08 000000093 INF: ===================Camera #2 Frame #68===================
17-03-01 08:05:26.689 -08 000000124 INF: Y Motor: Unshifted Position: 4680502
17-03-01 08:05:26.732 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 73, frameCount = 74.
17-03-01 08:05:26.732 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 74
17-03-01 08:05:26.732 -08 000000145 INF: ===================Camera #0 Frame #74===================
17-03-01 08:05:26.739 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:26.739 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 73, frameCount = 74.
17-03-01 08:05:26.739 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 74
17-03-01 08:05:26.739 -08 000000093 INF: ===================Camera #2 Frame #74===================
17-03-01 08:05:26.813 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:26.866 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:26.877 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:26.901 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 79, frameCount = 80.
17-03-01 08:05:26.901 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 80
17-03-01 08:05:26.901 -08 000000145 INF: ===================Camera #0 Frame #80===================
17-03-01 08:05:26.908 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:05:26.908 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:05:26.908 -08 000000093 INF: ===================Camera #2 Frame #81===================
17-03-01 08:05:27.002 -08 000000124 INF: Y Motor: Unshifted Position: 4477471
17-03-01 08:05:27.052 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:27.070 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:27.070 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:27.070 -08 000000145 INF: ===================Camera #0 Frame #87===================
17-03-01 08:05:27.081 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:27.081 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:27.081 -08 000000093 INF: ===================Camera #2 Frame #87===================
17-03-01 08:05:27.127 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:27.178 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:27.188 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:27.242 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:27.242 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:27.242 -08 000000145 INF: ===================Camera #0 Frame #93===================
17-03-01 08:05:27.250 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:27.250 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:27.250 -08 000000093 INF: ===================Camera #2 Frame #93===================
17-03-01 08:05:27.314 -08 000000124 INF: Y Motor: Unshifted Position: 4275331
17-03-01 08:05:27.364 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:27.410 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 98, frameCount = 99.
17-03-01 08:05:27.410 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 99
17-03-01 08:05:27.410 -08 000000145 INF: ===================Camera #0 Frame #99===================
17-03-01 08:05:27.419 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 98, frameCount = 99.
17-03-01 08:05:27.419 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 99
17-03-01 08:05:27.419 -08 000000093 INF: ===================Camera #2 Frame #99===================
17-03-01 08:05:27.438 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:27.490 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:27.501 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:27.578 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 104, frameCount = 105.
17-03-01 08:05:27.578 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 105
17-03-01 08:05:27.578 -08 000000145 INF: ===================Camera #0 Frame #105===================
17-03-01 08:05:27.588 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 105, frameCount = 106.
17-03-01 08:05:27.588 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 106
17-03-01 08:05:27.588 -08 000000093 INF: ===================Camera #2 Frame #106===================
17-03-01 08:05:27.625 -08 000000124 INF: Y Motor: Unshifted Position: 4072951
17-03-01 08:05:27.675 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:27.746 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 110, frameCount = 111.
17-03-01 08:05:27.746 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 111
17-03-01 08:05:27.746 -08 000000145 INF: ===================Camera #0 Frame #111===================
17-03-01 08:05:27.751 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:27.760 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 111, frameCount = 112.
17-03-01 08:05:27.760 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 112
17-03-01 08:05:27.760 -08 000000093 INF: ===================Camera #2 Frame #112===================
17-03-01 08:05:27.800 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:27.813 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:27.914 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:27.914 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:27.914 -08 000000145 INF: ===================Camera #0 Frame #118===================
17-03-01 08:05:27.929 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:27.929 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:27.929 -08 000000093 INF: ===================Camera #2 Frame #118===================
17-03-01 08:05:27.938 -08 000000124 INF: Y Motor: Unshifted Position: 3868206
17-03-01 08:05:27.988 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.063 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:28.085 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 123, frameCount = 124.
17-03-01 08:05:28.085 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 124
17-03-01 08:05:28.085 -08 000000145 INF: ===================Camera #0 Frame #124===================
17-03-01 08:05:28.098 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 123, frameCount = 124.
17-03-01 08:05:28.098 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 124
17-03-01 08:05:28.098 -08 000000093 INF: ===================Camera #2 Frame #124===================
17-03-01 08:05:28.114 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.124 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:28.251 -08 000000124 INF: Y Motor: Unshifted Position: 3667137
17-03-01 08:05:28.253 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 129, frameCount = 130.
17-03-01 08:05:28.253 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 130
17-03-01 08:05:28.253 -08 000000145 INF: ===================Camera #0 Frame #130===================
17-03-01 08:05:28.267 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 130, frameCount = 131.
17-03-01 08:05:28.267 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 131
17-03-01 08:05:28.267 -08 000000093 INF: ===================Camera #2 Frame #131===================
17-03-01 08:05:28.301 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.374 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:28.421 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 135, frameCount = 136.
17-03-01 08:05:28.421 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 136
17-03-01 08:05:28.421 -08 000000145 INF: ===================Camera #0 Frame #136===================
17-03-01 08:05:28.425 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.436 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:28.439 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 136, frameCount = 137.
17-03-01 08:05:28.439 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 137
17-03-01 08:05:28.439 -08 000000093 INF: ===================Camera #2 Frame #137===================
17-03-01 08:05:28.561 -08 000000124 INF: Y Motor: Unshifted Position: 3464128
17-03-01 08:05:28.589 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 141, frameCount = 142.
17-03-01 08:05:28.589 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 142
17-03-01 08:05:28.589 -08 000000145 INF: ===================Camera #0 Frame #142===================
17-03-01 08:05:28.608 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 142, frameCount = 143.
17-03-01 08:05:28.608 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 143
17-03-01 08:05:28.608 -08 000000093 INF: ===================Camera #2 Frame #143===================
17-03-01 08:05:28.611 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.686 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:28.737 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.748 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:28.757 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 148, frameCount = 149.
17-03-01 08:05:28.757 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 149
17-03-01 08:05:28.757 -08 000000145 INF: ===================Camera #0 Frame #149===================
17-03-01 08:05:28.777 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 148, frameCount = 149.
17-03-01 08:05:28.777 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 149
17-03-01 08:05:28.777 -08 000000093 INF: ===================Camera #2 Frame #149===================
17-03-01 08:05:28.875 -08 000000124 INF: Y Motor: Unshifted Position: 3261329
17-03-01 08:05:28.925 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:28.928 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 154, frameCount = 155.
17-03-01 08:05:28.928 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 155
17-03-01 08:05:28.928 -08 000000145 INF: ===================Camera #0 Frame #155===================
17-03-01 08:05:28.946 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 155, frameCount = 156.
17-03-01 08:05:28.946 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 156
17-03-01 08:05:28.946 -08 000000093 INF: ===================Camera #2 Frame #156===================
17-03-01 08:05:28.998 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:29.049 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:29.060 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:29.096 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 160, frameCount = 161.
17-03-01 08:05:29.096 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 161
17-03-01 08:05:29.096 -08 000000145 INF: ===================Camera #0 Frame #161===================
17-03-01 08:05:29.118 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 161, frameCount = 162.
17-03-01 08:05:29.118 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 162
17-03-01 08:05:29.118 -08 000000093 INF: ===================Camera #2 Frame #162===================
17-03-01 08:05:29.185 -08 000000124 INF: Y Motor: Unshifted Position: 3058533
17-03-01 08:05:29.235 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:29.264 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 166, frameCount = 167.
17-03-01 08:05:29.264 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 167
17-03-01 08:05:29.264 -08 000000145 INF: ===================Camera #0 Frame #167===================
17-03-01 08:05:29.287 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 167, frameCount = 168.
17-03-01 08:05:29.287 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 168
17-03-01 08:05:29.287 -08 000000093 INF: ===================Camera #2 Frame #168===================
17-03-01 08:05:29.310 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:29.362 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:29.374 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:29.374 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:29.374 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:29.375 -08 000000018 INF: WaitCommand(5000) start
17-03-01 08:05:29.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 5 of 5 seconds left===================
17-03-01 08:05:29.434 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 173, frameCount = 174.
17-03-01 08:05:29.434 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 174
17-03-01 08:05:29.434 -08 000000145 INF: ===================Camera #0 Frame #174===================
17-03-01 08:05:29.456 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 173, frameCount = 174.
17-03-01 08:05:29.456 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 174
17-03-01 08:05:29.456 -08 000000093 INF: ===================Camera #2 Frame #174===================
17-03-01 08:05:29.499 -08 000000124 INF: Y Motor: Unshifted Position: 2854218
17-03-01 08:05:29.549 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:29.607 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 179, frameCount = 180.
17-03-01 08:05:29.607 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 180
17-03-01 08:05:29.607 -08 000000145 INF: ===================Camera #0 Frame #180===================
17-03-01 08:05:29.627 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 180, frameCount = 181.
17-03-01 08:05:29.627 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 181
17-03-01 08:05:29.627 -08 000000093 INF: ===================Camera #2 Frame #181===================
17-03-01 08:05:29.673 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:29.777 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 185, frameCount = 186.
17-03-01 08:05:29.777 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 186
17-03-01 08:05:29.777 -08 000000145 INF: ===================Camera #0 Frame #186===================
17-03-01 08:05:29.802 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 186, frameCount = 187.
17-03-01 08:05:29.802 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 187
17-03-01 08:05:29.802 -08 000000093 INF: ===================Camera #2 Frame #187===================
17-03-01 08:05:29.809 -08 000000124 INF: Y Motor: Unshifted Position: 2652508
17-03-01 08:05:29.859 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:29.947 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 191, frameCount = 192.
17-03-01 08:05:29.947 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 192
17-03-01 08:05:29.947 -08 000000145 INF: ===================Camera #0 Frame #192===================
17-03-01 08:05:29.972 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 192, frameCount = 193.
17-03-01 08:05:29.972 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 193
17-03-01 08:05:29.972 -08 000000093 INF: ===================Camera #2 Frame #193===================
17-03-01 08:05:29.986 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.117 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 198, frameCount = 199.
17-03-01 08:05:30.117 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 199
17-03-01 08:05:30.117 -08 000000145 INF: ===================Camera #0 Frame #199===================
17-03-01 08:05:30.122 -08 000000124 INF: Y Motor: Unshifted Position: 2449057
17-03-01 08:05:30.143 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 199, frameCount = 200.
17-03-01 08:05:30.143 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 200
17-03-01 08:05:30.143 -08 000000093 INF: ===================Camera #2 Frame #200===================
17-03-01 08:05:30.172 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.291 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 204, frameCount = 205.
17-03-01 08:05:30.291 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 205
17-03-01 08:05:30.291 -08 000000145 INF: ===================Camera #0 Frame #205===================
17-03-01 08:05:30.298 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.318 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 205, frameCount = 206.
17-03-01 08:05:30.318 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 206
17-03-01 08:05:30.318 -08 000000093 INF: ===================Camera #2 Frame #206===================
17-03-01 08:05:30.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:30.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 4 of 5 seconds left===================
17-03-01 08:05:30.434 -08 000000124 INF: Y Motor: Unshifted Position: 2246042
17-03-01 08:05:30.461 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 210, frameCount = 211.
17-03-01 08:05:30.461 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 211
17-03-01 08:05:30.461 -08 000000145 INF: ===================Camera #0 Frame #211===================
17-03-01 08:05:30.484 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.489 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 211, frameCount = 212.
17-03-01 08:05:30.489 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 212
17-03-01 08:05:30.489 -08 000000093 INF: ===================Camera #2 Frame #212===================
17-03-01 08:05:30.608 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.631 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 217, frameCount = 218.
17-03-01 08:05:30.631 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 218
17-03-01 08:05:30.631 -08 000000145 INF: ===================Camera #0 Frame #218===================
17-03-01 08:05:30.659 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 218, frameCount = 219.
17-03-01 08:05:30.659 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 219
17-03-01 08:05:30.659 -08 000000093 INF: ===================Camera #2 Frame #219===================
17-03-01 08:05:30.747 -08 000000124 INF: Y Motor: Unshifted Position: 2044535
17-03-01 08:05:30.797 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.804 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 223, frameCount = 224.
17-03-01 08:05:30.804 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 224
17-03-01 08:05:30.804 -08 000000145 INF: ===================Camera #0 Frame #224===================
17-03-01 08:05:30.833 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 224, frameCount = 225.
17-03-01 08:05:30.833 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 225
17-03-01 08:05:30.833 -08 000000093 INF: ===================Camera #2 Frame #225===================
17-03-01 08:05:30.921 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:30.974 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 229, frameCount = 230.
17-03-01 08:05:30.974 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 230
17-03-01 08:05:30.974 -08 000000145 INF: ===================Camera #0 Frame #230===================
17-03-01 08:05:31.004 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 230, frameCount = 231.
17-03-01 08:05:31.004 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 231
17-03-01 08:05:31.004 -08 000000093 INF: ===================Camera #2 Frame #231===================
17-03-01 08:05:31.057 -08 000000124 INF: Y Motor: Unshifted Position: 1840868
17-03-01 08:05:31.107 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:31.144 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 236, frameCount = 237.
17-03-01 08:05:31.144 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 237
17-03-01 08:05:31.144 -08 000000145 INF: ===================Camera #0 Frame #237===================
17-03-01 08:05:31.175 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 237, frameCount = 238.
17-03-01 08:05:31.175 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 238
17-03-01 08:05:31.175 -08 000000093 INF: ===================Camera #2 Frame #238===================
17-03-01 08:05:31.234 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:31.317 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 242, frameCount = 243.
17-03-01 08:05:31.317 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 243
17-03-01 08:05:31.317 -08 000000145 INF: ===================Camera #0 Frame #243===================
17-03-01 08:05:31.349 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 243, frameCount = 244.
17-03-01 08:05:31.349 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 244
17-03-01 08:05:31.349 -08 000000093 INF: ===================Camera #2 Frame #244===================
17-03-01 08:05:31.370 -08 000000124 INF: Y Motor: Unshifted Position: 1637418
17-03-01 08:05:31.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:31.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 3 of 5 seconds left===================
17-03-01 08:05:31.420 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:31.487 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 248, frameCount = 249.
17-03-01 08:05:31.487 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 249
17-03-01 08:05:31.487 -08 000000145 INF: ===================Camera #0 Frame #249===================
17-03-01 08:05:31.520 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 249, frameCount = 250.
17-03-01 08:05:31.520 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 250
17-03-01 08:05:31.520 -08 000000093 INF: ===================Camera #2 Frame #250===================
17-03-01 08:05:31.544 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:31.657 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 254, frameCount = 255.
17-03-01 08:05:31.657 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 255
17-03-01 08:05:31.658 -08 000000145 INF: ===================Camera #0 Frame #255===================
17-03-01 08:05:31.683 -08 000000124 INF: Y Motor: Unshifted Position: 1435685
17-03-01 08:05:31.691 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 256, frameCount = 257.
17-03-01 08:05:31.691 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 257
17-03-01 08:05:31.691 -08 000000093 INF: ===================Camera #2 Frame #257===================
17-03-01 08:05:31.733 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:31.828 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 261, frameCount = 262.
17-03-01 08:05:31.828 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 262
17-03-01 08:05:31.828 -08 000000145 INF: ===================Camera #0 Frame #262===================
17-03-01 08:05:31.857 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:31.863 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 262, frameCount = 263.
17-03-01 08:05:31.863 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 263
17-03-01 08:05:31.863 -08 000000093 INF: ===================Camera #2 Frame #263===================
17-03-01 08:05:31.993 -08 000000124 INF: Y Motor: Unshifted Position: 1232241
17-03-01 08:05:32.001 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 267, frameCount = 268.
17-03-01 08:05:32.001 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 268
17-03-01 08:05:32.001 -08 000000145 INF: ===================Camera #0 Frame #268===================
17-03-01 08:05:32.034 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 268, frameCount = 269.
17-03-01 08:05:32.034 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 269
17-03-01 08:05:32.034 -08 000000093 INF: ===================Camera #2 Frame #269===================
17-03-01 08:05:32.043 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:32.118 -08 000000067 INF: FPGA: Recv TDIYWAIT
17-03-01 08:05:32.118 -08 000000036 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:32.120 -08 000000036 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:05:32.121 -08 000000111 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:05:32.121 -08 000000151 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:05:32.121 -08 000000111 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:05:32.121 -08 000000111 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:05:32.121 -08 000000111 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:05:32.122 -08 000000111 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:05:32.122 -08 000000151 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:05:32.122 -08 000000151 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:05:32.122 -08 000000151 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:05:32.123 -08 000000151 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:05:32.170 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:32.171 -08 000000145 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:32.171 -08 000000145 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:32.171 -08 000000145 INF: ===================Camera #0 Frame #272===================
17-03-01 08:05:32.184 -08 000000145 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:32.185 -08 000000145 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:32.307 -08 000000124 INF: Y Motor: Unshifted Position: 1029870
17-03-01 08:05:32.315 -08 000000145 INF: Camera #0 ReleaseBuffer
17-03-01 08:05:32.315 -08 000000093 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:32.315 -08 000000093 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:32.315 -08 000000093 INF: ===================Camera #2 Frame #272===================
17-03-01 08:05:32.315 -08 000000145 INF: ===================Camera TDI===================
17-03-01 08:05:32.324 -08 000000093 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:32.325 -08 000000093 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:32.344 -08 000000145 INF: ======================================
17-03-01 08:05:32.357 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:32.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:32.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 2 of 5 seconds left===================
17-03-01 08:05:32.491 -08 000000059 INF: FPGA: Recv EX1MV
17-03-01 08:05:32.491 -08 000000111 INF: Excitation Filter 1: Moved 107 steps in 369.3082 ms
17-03-01 08:05:32.491 -08 000000111 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 369.4184 ms
17-03-01 08:05:32.491 -08 000000111 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 369.4938 ms
17-03-01 08:05:32.491 -08 000000111 INF: ======================================
17-03-01 08:05:32.493 -08 000000124 INF: Y Motor: Unshifted Position: 992373
17-03-01 08:05:32.493 -08 000000124 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:32.493 -08 000000124 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:32.496 -08 000000093 INF: Camera #2 ReleaseBuffer
17-03-01 08:05:32.496 -08 000000093 INF: ===================Camera TDI===================
17-03-01 08:05:32.531 -08 000000093 INF: ======================================
17-03-01 08:05:32.532 -08 000000062 INF: ===================Camera TDI===================
17-03-01 08:05:32.533 -08 000000062 INF: ======================================
17-03-01 08:05:32.553 -08 000000116 INF: FPGA: Recv EX2MV
17-03-01 08:05:32.553 -08 000000151 INF: Excitation Filter 2: Moved 107 steps in 430.9369 ms
17-03-01 08:05:32.553 -08 000000151 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 431.0886 ms
17-03-01 08:05:32.553 -08 000000151 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 431.1624 ms
17-03-01 08:05:32.553 -08 000000151 INF: ======================================
17-03-01 08:05:32.554 -08 000000036 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:32.556 -08 000000036 INF: ======================================
17-03-01 08:05:32.556 -08 000000124 INF: Y Motor: Recv v 0\r
17-03-01 08:05:32.556 -08 000000124 INF: Y Motor: Moved to 14.9237 after 7864 ms
17-03-01 08:05:32.556 -08 000000124 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:32.617 -08 000000124 INF: Y Motor: Recv v 4097\r
17-03-01 08:05:32.617 -08 000000124 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:32.617 -08 000000124 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:32.679 -08 000000124 INF: Y Motor: Recv v 0\r
17-03-01 08:05:32.679 -08 000000124 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:32.679 -08 000000124 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:32.744 -08 000000124 INF: Y Motor: Recv v 134217728\r
17-03-01 08:05:32.744 -08 000000124 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:05:32.744 -08 000000124 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:32.744 -08 000000124 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:32.806 -08 000000124 INF: Y Motor: Recv v 0\r
17-03-01 08:05:32.806 -08 000000124 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:32.806 -08 000000124 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:32.806 -08 000000124 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:32.868 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:05:32.868 -08 000000124 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:32.868 -08 000000124 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:32.930 -08 000000124 INF: Y Motor: Recv ok\r
17-03-01 08:05:32.930 -08 000000124 INF: ======================================
17-03-01 08:05:32.931 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:32.932 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:32.933 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:32.933 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:05:32.990 -08 000000122 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:05:32.990 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:33.052 -08 000000154 INF: FPGA: Recv TDIYERD 1492374
17-03-01 08:05:33.052 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:05:33.114 -08 000000044 INF: FPGA: Recv ZADCR 35274
17-03-01 08:05:33.114 -08 000000042 INF: At scan end Y pos = 14.924 and Z pos = -0.135. Y moved -48.539 mm
17-03-01 08:05:33.114 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:05:33.176 -08 000000084 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:05:33.176 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:05:33.176 -08 000000042 INF: TDIScan finished after 12607.8529 ms
17-03-01 08:05:33.176 -08 000000042 INF: Image[0]: Y should trigger at 63.463 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:05:33.176 -08 000000042 INF: Image[2]: Y should trigger at 63.463 mm, 2nd row was at 64.372 mm (error = 0.909 mm)
17-03-01 08:05:33.178 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.212 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.890 um
17-03-01 08:05:33.212 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.213 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:05:33.241 -08 000000067 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:05:33.241 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.242 -08 000000146 INF: ===================Dither Clean Up Command===================
17-03-01 08:05:33.242 -08 000000032 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:05:33.242 -08 000000106 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:05:33.242 -08 000000117 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:05:33.243 -08 000000032 INF: ======================================
17-03-01 08:05:33.243 -08 000000106 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:33.243 -08 000000106 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:33.243 -08 000000145 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:33.243 -08 000000154 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:33.243 -08 000000145 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:05:33.243 -08 000000117 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:05:33.244 -08 000000117 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:05:33.246 -08 000000154 INF: ===================LFT:Extracting coords===================
17-03-01 08:05:33.271 -08 000000154 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:33.272 -08 000000154 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:05:33.273 -08 000000092 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.273 -08 000000040 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.273 -08 000000135 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.273 -08 000000105 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.273 -08 000000092 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:33.273 -08 000000040 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:33.273 -08 000000105 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:33.274 -08 000000135 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:33.301 -08 000000136 INF: FPGA: Recv ZSEL 
17-03-01 08:05:33.301 -08 000000136 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:33.301 -08 000000145 INF: FPGA: Xmit ZDACW 40331\n
17-03-01 08:05:33.301 -08 000000117 INF: ======================================
17-03-01 08:05:33.303 -08 000000106 INF: Y Motor: Recv ok\r
17-03-01 08:05:33.303 -08 000000106 INF: ======================================
17-03-01 08:05:33.347 -08 000000092 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:33.348 -08 000000040 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:33.348 -08 000000105 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:33.348 -08 000000135 INF: FC:B, C:52,L:3, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:33.366 -08 000000035 INF: FPGA: Recv ZDACW 
17-03-01 08:05:33.367 -08 000000145 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:05:33.367 -08 000000145 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:05:33.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:33.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 1 of 5 seconds left===================
17-03-01 08:05:33.428 -08 000000113 INF: FPGA: Recv TDIBB
17-03-01 08:05:33.428 -08 000000145 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:33.429 -08 000000145 INF: ======================================
17-03-01 08:05:33.499 -08 000000092 INF: LFT found best fwhm score 2.000009 in 152 ms
17-03-01 08:05:33.499 -08 000000092 INF: LFT found good score at index 7649 with fwhm value 2.000009. Next cycle, cycle 53 starting Z position for top surface is at -0.156 mm FC:B, C:52,L:3,T
17-03-01 08:05:33.499 -08 000000105 INF: LFT found best fwhm score 2.131525 in 151 ms
17-03-01 08:05:33.499 -08 000000105 INF: LFT found good score at index 7269 with fwhm value 2.131525. Next cycle, cycle 53 starting Z position for top surface is at -0.156 mm FC:B, C:52,L:3,T
17-03-01 08:05:33.499 -08 000000092 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.499 -08 000000040 INF: LFT found best fwhm score 2.000027 in 151 ms
17-03-01 08:05:33.499 -08 000000040 INF: LFT found good score at index 665 with fwhm value 2.000027. Next cycle, cycle 53 starting Z position for top surface is at -0.158 mm FC:B, C:52,L:3,T
17-03-01 08:05:33.499 -08 000000135 INF: LFT found best fwhm score 2.000082 in 151 ms
17-03-01 08:05:33.499 -08 000000135 INF: LFT found good score at index 4149 with fwhm value 2.000082. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:3,T
17-03-01 08:05:33.499 -08 000000105 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.499 -08 000000040 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.499 -08 000000092 INF: ======================================
17-03-01 08:05:33.499 -08 000000135 INF: ===================LookupFocusTracking===================
17-03-01 08:05:33.499 -08 000000105 INF: ======================================
17-03-01 08:05:33.500 -08 000000040 INF: ======================================
17-03-01 08:05:33.500 -08 000000135 INF: ======================================
17-03-01 08:05:33.501 -08 000000154 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:33.502 -08 000000154 INF: LFT weighted average best Z for top surface is at -0.157mm FC:B, C:52,L:3,T
17-03-01 08:05:33.502 -08 000000154 INF: ======================================
17-03-01 08:05:33.503 -08 000000146 INF: ======================================
17-03-01 08:05:33.504 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.505 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:05:33.505 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.505 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:05:33.505 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.505 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:05:33.505 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.506 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:05:33.506 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.506 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308===================
17-03-01 08:05:33.506 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308===================
17-03-01 08:05:33.507 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 1 of 5 seconds left, Waiting for image analysis===================
17-03-01 08:05:33.507 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Delay 1 of 5 seconds left===================
17-03-01 08:05:33.507 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:05:33.508 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3, Swath 2 - X = 75.26964 Y = 39.76308===================
17-03-01 08:05:33.530 -08 000000042 INF: Waited 23 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 1, buffer wait time 0
17-03-01 08:05:33.531 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:33.531 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:33.531 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:33.531 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:05:33.532 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 3===================
17-03-01 08:05:33.532 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface===================
17-03-01 08:05:33.603 -08 000000106 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1202 Request: {"Cycle":52,"Lane":3,"Tile":1202,"Channels":["G","C","T","A"],"MemoryMappedFileNames":["HCSMMF262","HCSMMF277","HCSMMF233","HCSMMF238"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.627 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.628 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.628 -08 000000042 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:33.629 -08 000000042 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:33.709 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:05:33.710 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.710 -08 000000042 INF: TopSurfaceZPositions[] was -0.156843003649538, so used the TopSurfaceZPositions[] (-0.156843003649538) + compensator value (0.0227).
17-03-01 08:05:33.714 -08 000000042 INF: LFT enabled: Best z-height for LaneTopSurface and Illumina.Instrument.Logic.Sentrix.II.SentrixSection was found to be -0.134143003649538
17-03-01 08:05:33.714 -08 000000042 INF: Lane 4, LaneTopSurface Surface was not flagged for detilt operations prior to ETF. Moving to default tilt positions: m1=5.000498, m2=5.391912, m3=5.33908
17-03-01 08:05:33.715 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.716 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.717 -08 000000121 INF: ===================Move Tilt Motor 1===================
17-03-01 08:05:33.717 -08 000000092 INF: ===================Move Tilt Motor 2===================
17-03-01 08:05:33.717 -08 000000117 INF: ===================Move Tilt Motor 3===================
17-03-01 08:05:33.718 -08 000000092 INF: ======================================
17-03-01 08:05:33.718 -08 000000117 INF: ======================================
17-03-01 08:05:33.719 -08 000000121 INF: ======================================
17-03-01 08:05:33.720 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.721 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.722 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.724 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.724 -08 000000042 INF: Compensator: Remaining IntoPath
17-03-01 08:05:33.724 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.726 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:33.819 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1201 Request: {"Cycle":52,"Lane":3,"Tile":1201,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF234","HCSMMF205","HCSMMF260","HCSMMF249"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.820 -08 000000116 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1207 Request: {"Cycle":52,"Lane":3,"Tile":1207,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF231","HCSMMF239","HCSMMF210","HCSMMF240"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.820 -08 000000136 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1216 Request: {"Cycle":52,"Lane":3,"Tile":1216,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF267","HCSMMF274","HCSMMF207","HCSMMF232"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.821 -08 000000042 INF: Swath 1 position calculated to be: {X=76.92664, Y=39.76308} from estimated center X= 77.44199, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:05:33.821 -08 000000042 INF: Swath 2 position calculated to be: {X=78.03464, Y=39.76308} from estimated center X= 77.44199, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:05:33.821 -08 000000064 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1211 Request: {"Cycle":52,"Lane":3,"Tile":1211,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF229","HCSMMF187","HCSMMF188","HCSMMF256"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.822 -08 000000150 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1205 Request: {"Cycle":52,"Lane":3,"Tile":1205,"Channels":["G","T","C","A"],"MemoryMappedFileNames":["HCSMMF261","HCSMMF287","HCSMMF192","HCSMMF186"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.823 -08 000000125 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1214 Request: {"Cycle":52,"Lane":3,"Tile":1214,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF218","HCSMMF242","HCSMMF255","HCSMMF220"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.824 -08 000000145 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1208 Request: {"Cycle":52,"Lane":3,"Tile":1208,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF177","HCSMMF223","HCSMMF266","HCSMMF182"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.825 -08 000000096 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1204 Request: {"Cycle":52,"Lane":3,"Tile":1204,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF176","HCSMMF228","HCSMMF206","HCSMMF270"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.826 -08 000000104 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1212 Request: {"Cycle":52,"Lane":3,"Tile":1212,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF271","HCSMMF280","HCSMMF275","HCSMMF190"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.826 -08 000000084 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1215 Request: {"Cycle":52,"Lane":3,"Tile":1215,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF180","HCSMMF225","HCSMMF195","HCSMMF211"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.827 -08 000000042 INF: Swath 0: Converted transform from (-51.08708, 51.84886) pixels to (-0.017595, 0.01794) mm.
17-03-01 08:05:33.827 -08 000000062 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1224 Request: {"Cycle":52,"Lane":3,"Tile":1224,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF285","HCSMMF208","HCSMMF222","HCSMMF221"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.828 -08 000000112 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1203 Request: {"Cycle":52,"Lane":3,"Tile":1203,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF258","HCSMMF278","HCSMMF253","HCSMMF244"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.829 -08 000000054 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1225 Request: {"Cycle":52,"Lane":3,"Tile":1225,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF241","HCSMMF283","HCSMMF252","HCSMMF191"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.830 -08 000000107 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1217 Request: {"Cycle":52,"Lane":3,"Tile":1217,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF209","HCSMMF196","HCSMMF179","HCSMMF214"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.830 -08 000000036 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1222 Request: {"Cycle":52,"Lane":3,"Tile":1222,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF247","HCSMMF189","HCSMMF227","HCSMMF217"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.833 -08 000000042 INF: Swath 1: Converted transform from (-71.85352, 51.36319) pixels to (-0.02484, 0.017595) mm.
17-03-01 08:05:33.833 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308===================
17-03-01 08:05:33.834 -08 000000113 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1209 Request: {"Cycle":52,"Lane":3,"Tile":1209,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF201","HCSMMF246","HCSMMF226","HCSMMF248"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.834 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308===================
17-03-01 08:05:33.834 -08 000000128 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1227 Request: {"Cycle":52,"Lane":3,"Tile":1227,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF236","HCSMMF235","HCSMMF219","HCSMMF265"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.834 -08 000000042 INF: Transformed XStagePosition from 76.92664 mm to 76.9090407416224 mm.
17-03-01 08:05:33.835 -08 000000118 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1220 Request: {"Cycle":52,"Lane":3,"Tile":1220,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF281","HCSMMF237","HCSMMF250","HCSMMF272"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.836 -08 000000069 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1213 Request: {"Cycle":52,"Lane":3,"Tile":1213,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF200","HCSMMF212","HCSMMF282"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.837 -08 000000119 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1223 Request: {"Cycle":52,"Lane":3,"Tile":1223,"Channels":["C","T","A","G"],"MemoryMappedFileNames":["HCSMMF198","HCSMMF259","HCSMMF243","HCSMMF257"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.837 -08 000000020 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1206 Request: {"Cycle":52,"Lane":3,"Tile":1206,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF263","HCSMMF230","HCSMMF184","HCSMMF185"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.838 -08 000000097 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1219 Request: {"Cycle":52,"Lane":3,"Tile":1219,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF276","HCSMMF284","HCSMMF213","HCSMMF279"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.839 -08 000000122 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1228 Request: {"Cycle":52,"Lane":3,"Tile":1228,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF193","HCSMMF197","HCSMMF203","HCSMMF194"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.840 -08 000000153 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1221 Request: {"Cycle":52,"Lane":3,"Tile":1221,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF245","HCSMMF269","HCSMMF268","HCSMMF251"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.843 -08 000000109 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1210 Request: {"Cycle":52,"Lane":3,"Tile":1210,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF216","HCSMMF178","HCSMMF224","HCSMMF286"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.844 -08 000000144 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1226 Request: {"Cycle":52,"Lane":3,"Tile":1226,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF202","HCSMMF254","HCSMMF215","HCSMMF204"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.846 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5710293551683 mm.
17-03-01 08:05:33.846 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3710293551683 mm.
17-03-01 08:05:33.846 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4617793551683 mm.
17-03-01 08:05:33.846 -08 000000129 INF: Notifying RTA to Process Multi MMF for Lane: 3 Cycle: 52 Tile: 1218 Request: {"Cycle":52,"Lane":3,"Tile":1218,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF199","HCSMMF183","HCSMMF273","HCSMMF181"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:33.848 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.848 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:05:33.848 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:33.848 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -153.9 um, section = D_1
17-03-01 08:05:33.850 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:33.850 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:33.851 -08 000000106 INF: ===================MoveEmissionFilters===================
17-03-01 08:05:33.851 -08 000000089 INF: ===================Move X,Y===================
17-03-01 08:05:33.851 -08 000000087 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:33.852 -08 000000068 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:33.852 -08 000000135 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:33.852 -08 000000087 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:05:33.852 -08 000000040 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:33.852 -08 000000035 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:33.852 -08 000000087 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:05:33.852 -08 000000087 INF: Z Motor: Moving to -0.1541 mm, started at -0.1539 mm
17-03-01 08:05:33.853 -08 000000087 INF: FPGA: Xmit ZTRG 0\n
17-03-01 08:05:33.853 -08 000000068 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:33.853 -08 000000135 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:33.853 -08 000000089 INF: ===================Move X,Y, Parallel===================
17-03-01 08:05:33.853 -08 000000040 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:33.853 -08 000000035 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:33.853 -08 000000136 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:05:33.854 -08 000000137 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:05:33.854 -08 000000064 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:05:33.854 -08 000000150 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:05:33.854 -08 000000137 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:05:33.854 -08 000000061 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:05:33.854 -08 000000117 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:05:33.854 -08 000000137 INF: ======================================
17-03-01 08:05:33.854 -08 000000136 INF: ======================================
17-03-01 08:05:33.854 -08 000000061 INF: ======================================
17-03-01 08:05:33.854 -08 000000023 INF: ===================Move X Motor without settling===================
17-03-01 08:05:33.855 -08 000000154 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:33.855 -08 000000023 INF: X Motor: Xmit PR VM\n
17-03-01 08:05:33.855 -08 000000117 INF: ======================================
17-03-01 08:05:33.855 -08 000000154 INF: Y Motor: Moving to 64.5710 mm @25.000 mm/sec, started at 14.9237 mm
17-03-01 08:05:33.855 -08 000000154 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:33.855 -08 000000154 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:33.855 -08 000000150 INF: ======================================
17-03-01 08:05:33.856 -08 000000068 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:33.856 -08 000000035 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:33.856 -08 000000061 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:05:33.856 -08 000000105 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:05:33.857 -08 000000105 INF: ======================================
17-03-01 08:05:33.857 -08 000000068 INF: ======================================
17-03-01 08:05:33.857 -08 000000061 INF: ======================================
17-03-01 08:05:33.857 -08 000000064 INF: ======================================
17-03-01 08:05:33.857 -08 000000035 INF: ======================================
17-03-01 08:05:33.858 -08 000000135 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:33.858 -08 000000040 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:33.859 -08 000000135 INF: ======================================
17-03-01 08:05:33.860 -08 000000040 INF: ======================================
17-03-01 08:05:33.860 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:33.860 -08 000000106 INF: ======================================
17-03-01 08:05:33.866 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:05:33.878 -08 000000132 INF: FPGA: Recv ZTRG 
17-03-01 08:05:33.878 -08 000000087 INF: FPGA: Xmit ZYT 0 3\n
17-03-01 08:05:33.943 -08 000000119 INF: FPGA: Recv ZYT 
17-03-01 08:05:33.943 -08 000000087 INF: Z Motor: ZMV will trigger camera immediately and ramp is HW controlled
17-03-01 08:05:33.943 -08 000000087 INF: FPGA: Xmit ZMV 40407\n
17-03-01 08:05:33.946 -08 000000023 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:05:33.946 -08 000000023 INF: X Motor: Xmit PR VI\n
17-03-01 08:05:33.946 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:05:33.946 -08 000000154 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:33.946 -08 000000154 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:33.954 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:33.954 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:05:33.991 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:33.996 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:05:34.005 -08 000000064 INF: FPGA: Recv @LOG Trigger Camera
17-03-01 08:05:34.005 -08 000000064 INF: FPGA: Recv ZMV 
17-03-01 08:05:34.005 -08 000000006 INF: FPGA: Trigger Camera
17-03-01 08:05:34.005 -08 000000087 INF: Z Motor: MoveAndTrigger 'ZMV' command took 62.115 ms
17-03-01 08:05:34.005 -08 000000087 INF: FPGA: Xmit ZDACR\n
17-03-01 08:05:34.007 -08 000000023 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:05:34.007 -08 000000023 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:05:34.007 -08 000000023 INF: X Motor: Moving to 76.9090 mm @15.000 mm/sec, started at 75.2402 mm
17-03-01 08:05:34.007 -08 000000023 INF: X Motor: Xmit MA 7336\n
17-03-01 08:05:34.008 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:05:34.008 -08 000000154 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:34.067 -08 000000032 INF: FPGA: Recv ZDACR 40407
17-03-01 08:05:34.067 -08 000000087 INF: Z Motor: MoveAndTrigger took 214.5776 ms w/comms
17-03-01 08:05:34.067 -08 000000087 INF: Z Motor: After move to -0.1541, error = 0.0000, min/max error = 0.0000/0.0000, tolerance = 0.0010 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:05:34.067 -08 000000087 INF: Z Motor: MoveAbsStepped took 214.7714 ms
17-03-01 08:05:34.068 -08 000000087 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:34.069 -08 000000023 INF: X Motor: Recv MA 7336\r\n>
17-03-01 08:05:34.069 -08 000000154 INF: Y Motor: Recv v 0\r
17-03-01 08:05:34.069 -08 000000154 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:34.069 -08 000000023 INF: X Motor: WaitUntilStopped 60111
17-03-01 08:05:34.069 -08 000000087 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:05:34.069 -08 000000154 INF: Y Motor: Set target position to 5957103 encoder counts
17-03-01 08:05:34.069 -08 000000154 INF: Y Motor: Xmit s r0xca 5957103\r
17-03-01 08:05:34.070 -08 000000097 INF: ===================TDI Scan Setup===================
17-03-01 08:05:34.070 -08 000000140 INF: ===================Camera Arm TDI===================
17-03-01 08:05:34.071 -08 000000097 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:34.071 -08 000000140 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:34.071 -08 000000097 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:34.072 -08 000000140 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:34.072 -08 000000097 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:34.072 -08 000000097 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:05:34.093 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:34.099 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:05:34.129 -08 000000153 INF: FPGA: Recv ZSEL 
17-03-01 08:05:34.130 -08 000000097 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:34.130 -08 000000097 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:05:34.131 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:05:34.131 -08 000000154 INF: Y Motor: Start the move command
17-03-01 08:05:34.131 -08 000000154 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:34.192 -08 000000148 INF: FPGA: Recv TDIBB
17-03-01 08:05:34.192 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:34.192 -08 000000097 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:34.193 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:05:34.193 -08 000000154 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:05:34.193 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:34.193 -08 000000097 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:34.194 -08 000000097 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:34.195 -08 000000097 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:05:34.196 -08 000000097 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:05:34.196 -08 000000097 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:05:34.197 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:05:34.253 -08 000000094 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:34.253 -08 000000097 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:34.256 -08 000000097 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:05:34.256 -08 000000097 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:34.258 -08 000000097 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:05:34.258 -08 000000097 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:05:34.258 -08 000000097 INF: Z Motor: Arming to move to -0.1141 mm
17-03-01 08:05:34.258 -08 000000097 INF: FPGA: Xmit ZYT 6437103 4\n
17-03-01 08:05:34.293 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:34.316 -08 000000105 INF: FPGA: Recv ZYT 
17-03-01 08:05:34.316 -08 000000097 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492373 enc / 14.924 mm / ) = 6437103 enc / 64.371 mm
17-03-01 08:05:34.316 -08 000000097 INF: FPGA: Xmit ZARM 29921\n
17-03-01 08:05:34.317 -08 000000154 INF: Y Motor: Unshifted Position: 1073887
17-03-01 08:05:34.367 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:34.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:34.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:34.375 -08 000000018 INF: WaitCommand(5000) end
17-03-01 08:05:34.375 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:34.377 -08 000000146 INF: FPGA: Recv ZARM
17-03-01 08:05:34.377 -08 000000097 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 61.0901 ms
17-03-01 08:05:34.377 -08 000000097 INF: Z Motor: ArmAbsStepped took 118.7753 ms
17-03-01 08:05:34.377 -08 000000097 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:34.379 -08 000000097 INF: ===================TDI Scan Setup===================
17-03-01 08:05:34.380 -08 000000097 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:05:34.381 -08 000000097 INF: ===================TDI Scan Setup===================
17-03-01 08:05:34.382 -08 000000097 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:05:34.383 -08 000000097 INF: ===================TDI Scan Setup===================
17-03-01 08:05:34.384 -08 000000097 INF: ======================================
17-03-01 08:05:34.474 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:34.495 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:34.571 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`15360 (0x03)\r\n(0xFF)
17-03-01 08:05:34.571 -08 000000018 INF: Current Position of Pump is: 15360
17-03-01 08:05:34.584 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:05:34.631 -08 000000154 INF: Y Motor: Unshifted Position: 1784864
17-03-01 08:05:34.671 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:34.681 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:34.693 -08 000000140 INF: Camera #0 AttachBuffer (imageDataPtr = 56923197488 imgPtr = 56923197488 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:34.694 -08 000000140 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:34.694 -08 000000140 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:34.695 -08 000000023 INF: X Motor: Xmit PR ER\n
17-03-01 08:05:34.709 -08 000000140 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:34.711 -08 000000140 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:34.754 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`15360 (0x03)\r\n(0xFF)
17-03-01 08:05:34.754 -08 000000018 INF: Current Position of Pump is: 15360
17-03-01 08:05:34.754 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4), Dispensing port PortC===================
17-03-01 08:05:34.755 -08 000000023 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:05:34.755 -08 000000023 INF: X Motor: Moved to 76.9102 after 686 ms
17-03-01 08:05:34.755 -08 000000023 INF: ======================================
17-03-01 08:05:34.805 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:34.854 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V8000OD15360R\r
17-03-01 08:05:34.940 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:34.941 -08 000000154 INF: Y Motor: Unshifted Position: 2579069
17-03-01 08:05:34.991 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:35.040 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:35.119 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:35.127 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:35.255 -08 000000154 INF: Y Motor: Unshifted Position: 3345669
17-03-01 08:05:35.305 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:35.352 -08 000000140 INF: Camera #2 AttachBuffer (imageDataPtr = 58735136816 imgPtr = 64223121456 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:35.353 -08 000000140 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:35.353 -08 000000140 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:35.368 -08 000000140 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:35.370 -08 000000140 INF: ===================Camera Arm TDI===================
17-03-01 08:05:35.371 -08 000000140 INF: ======================================
17-03-01 08:05:35.372 -08 000000087 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:35.373 -08 000000087 INF: ======================================
17-03-01 08:05:35.377 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:35.431 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:35.439 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:35.567 -08 000000154 INF: Y Motor: Unshifted Position: 4125737
17-03-01 08:05:35.617 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:35.689 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:35.742 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:35.752 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:35.877 -08 000000154 INF: Y Motor: Unshifted Position: 4901515
17-03-01 08:05:35.927 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:36.002 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:36.055 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:36.063 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:36.191 -08 000000154 INF: Y Motor: Unshifted Position: 5684909
17-03-01 08:05:36.241 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:36.313 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:36.364 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:36.375 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:36.503 -08 000000154 INF: Y Motor: Unshifted Position: 5957104
17-03-01 08:05:36.503 -08 000000154 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:36.503 -08 000000154 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:36.565 -08 000000154 INF: Y Motor: Recv v 0\r
17-03-01 08:05:36.565 -08 000000154 INF: Y Motor: Moved to 64.5710 after 2372 ms
17-03-01 08:05:36.565 -08 000000154 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:36.625 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:36.629 -08 000000154 INF: Y Motor: Recv v 4096\r
17-03-01 08:05:36.629 -08 000000154 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:36.629 -08 000000154 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:36.688 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:36.689 -08 000000154 INF: Y Motor: Recv v 0\r
17-03-01 08:05:36.689 -08 000000154 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:36.689 -08 000000154 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:36.751 -08 000000154 INF: Y Motor: Recv v 402653184\r
17-03-01 08:05:36.751 -08 000000154 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:05:36.751 -08 000000154 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:36.751 -08 000000154 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:36.813 -08 000000154 INF: Y Motor: Recv v 0\r
17-03-01 08:05:36.813 -08 000000154 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:36.813 -08 000000154 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:36.813 -08 000000154 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:36.875 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:05:36.875 -08 000000154 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:36.875 -08 000000154 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:36.938 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:36.941 -08 000000154 INF: Y Motor: Recv ok\r
17-03-01 08:05:36.941 -08 000000154 INF: ======================================
17-03-01 08:05:36.942 -08 000000089 INF: ===================Move X,Y===================
17-03-01 08:05:36.944 -08 000000089 INF: ======================================
17-03-01 08:05:36.946 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:36.947 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:36.947 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:05:36.947 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:05:37.000 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:37.001 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:05:37.001 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:05:37.063 -08 000000084 INF: FPGA: Recv ZFREQCL
17-03-01 08:05:37.064 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:05:37.064 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:37.064 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:37.125 -08 000000097 INF: FPGA: Recv TDIYERD 6457104
17-03-01 08:05:37.125 -08 000000042 INF: Before scan, Y encoder from FPGA = 6457104 counts (64.571 mm)
17-03-01 08:05:37.125 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:37.126 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:37.127 -08 000000129 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:37.127 -08 000000089 INF: ===================Set YMotor gains for scans===================
17-03-01 08:05:37.127 -08 000000089 INF: ======================================
17-03-01 08:05:37.127 -08 000000129 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:37.128 -08 000000129 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:05:37.128 -08 000000129 INF: FPGA: Xmit TDIYPOS 6346178\n
17-03-01 08:05:37.187 -08 000000136 INF: FPGA: Recv TDIYPOS
17-03-01 08:05:37.188 -08 000000129 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:37.189 -08 000000129 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:05:37.189 -08 000000129 INF: FPGA: Xmit TDIYARM3 139264 6437103 1 1\n
17-03-01 08:05:37.249 -08 000000124 INF: FPGA: Recv TDIYARM3
17-03-01 08:05:37.249 -08 000000129 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:37.250 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:37.250 -08 000000129 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:37.251 -08 000000129 INF: ======================================
17-03-01 08:05:37.253 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:37.253 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:37.253 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:37.254 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:37.254 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:37.255 -08 000000084 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:05:37.255 -08 000000084 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:05:37.255 -08 000000084 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:05:37.255 -08 000000084 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:05:37.256 -08 000000084 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:05:37.256 -08 000000088 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:05:37.256 -08 000000088 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:05:37.256 -08 000000088 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:05:37.256 -08 000000088 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:05:37.257 -08 000000088 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:05:37.311 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:37.311 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB1 (4)===================
17-03-01 08:05:37.311 -08 000000018 INF: KloehnPump A (KLOEHNA): Waiting 1000 ms before setting solenoid valve back to 'aspirate' position after PumpSolution
17-03-01 08:05:37.623 -08 000000144 INF: FPGA: Recv EX2MV
17-03-01 08:05:37.623 -08 000000144 INF: FPGA: Recv EX1MV
17-03-01 08:05:37.623 -08 000000088 INF: Excitation Filter 1: Moved -107 steps in 366.9698 ms
17-03-01 08:05:37.623 -08 000000084 INF: Excitation Filter 2: Moved -107 steps in 367.5986 ms
17-03-01 08:05:37.623 -08 000000088 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 367.0998 ms
17-03-01 08:05:37.623 -08 000000084 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 367.7606 ms
17-03-01 08:05:37.623 -08 000000084 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 367.8773 ms
17-03-01 08:05:37.623 -08 000000088 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 367.2758 ms
17-03-01 08:05:37.624 -08 000000084 INF: ======================================
17-03-01 08:05:37.624 -08 000000088 INF: ======================================
17-03-01 08:05:37.625 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:37.626 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:37.627 -08 000000116 INF: ===================Camera TDI===================
17-03-01 08:05:37.627 -08 000000009 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:37.640 -08 000000032 INF: ===================FPGA Z Wait===================
17-03-01 08:05:37.640 -08 000000009 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:05:37.640 -08 000000087 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:37.640 -08 000000032 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:05:37.640 -08 000000087 INF: Y Motor: Moving to 14.9227 mm @6.500 mm/sec, started at 64.5710 mm
17-03-01 08:05:37.640 -08 000000087 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:37.640 -08 000000087 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:37.641 -08 000000009 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:05:37.642 -08 000000116 INF: ===================Camera TDI, Parallel===================
17-03-01 08:05:37.643 -08 000000054 INF: ===================Camera TDI===================
17-03-01 08:05:37.643 -08 000000092 INF: ===================Camera TDI===================
17-03-01 08:05:37.645 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:37.645 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:37.654 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:37.654 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:37.688 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:37.688 -08 000000087 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:37.688 -08 000000087 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:37.749 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:37.749 -08 000000087 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:37.796 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:37.796 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:37.805 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:37.805 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:37.811 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:37.811 -08 000000087 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:37.811 -08 000000087 INF: Y Motor: Set target position to 992269 encoder counts
17-03-01 08:05:37.811 -08 000000087 INF: Y Motor: Xmit s r0xca 992269\r
17-03-01 08:05:37.877 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:37.877 -08 000000087 INF: Y Motor: Start the move command
17-03-01 08:05:37.877 -08 000000087 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:37.939 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:37.939 -08 000000087 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:05:37.939 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:37.946 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:37.946 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:37.955 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:37.955 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:37.996 -08 000000139 INF: FPGA: Recv ZWAIT 
17-03-01 08:05:37.996 -08 000000032 INF: ======================================
17-03-01 08:05:38.063 -08 000000087 INF: Y Motor: Unshifted Position: 5897203
17-03-01 08:05:38.096 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:38.096 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:38.096 -08 000000054 INF: ===================Camera #2 Frame #5===================
17-03-01 08:05:38.105 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:38.105 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:38.105 -08 000000092 INF: ===================Camera #0 Frame #5===================
17-03-01 08:05:38.113 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:38.237 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:38.268 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:38.268 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:38.268 -08 000000054 INF: ===================Camera #2 Frame #11===================
17-03-01 08:05:38.270 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:38.270 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:38.270 -08 000000092 INF: ===================Camera #0 Frame #11===================
17-03-01 08:05:38.373 -08 000000087 INF: Y Motor: Unshifted Position: 5693535
17-03-01 08:05:38.411 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1IR\r
17-03-01 08:05:38.423 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:38.438 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 17, frameCount = 18.
17-03-01 08:05:38.438 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 18
17-03-01 08:05:38.438 -08 000000092 INF: ===================Camera #0 Frame #18===================
17-03-01 08:05:38.442 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 17, frameCount = 18.
17-03-01 08:05:38.442 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 18
17-03-01 08:05:38.442 -08 000000054 INF: ===================Camera #2 Frame #18===================
17-03-01 08:05:38.500 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:38.551 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:38.600 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:38.613 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:05:38.613 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:05:38.613 -08 000000092 INF: ===================Camera #0 Frame #24===================
17-03-01 08:05:38.621 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:38.624 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:05:38.624 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:05:38.624 -08 000000054 INF: ===================Camera #2 Frame #24===================
17-03-01 08:05:38.687 -08 000000087 INF: Y Motor: Unshifted Position: 5491388
17-03-01 08:05:38.737 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:38.786 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:05:38.786 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:05:38.786 -08 000000092 INF: ===================Camera #0 Frame #30===================
17-03-01 08:05:38.793 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 30, frameCount = 31.
17-03-01 08:05:38.793 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 31
17-03-01 08:05:38.793 -08 000000054 INF: ===================Camera #2 Frame #31===================
17-03-01 08:05:38.861 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:38.871 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:38.934 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:38.934 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:38.934 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Closing shutoff valve===================
17-03-01 08:05:38.962 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:38.962 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:38.962 -08 000000092 INF: ===================Camera #0 Frame #37===================
17-03-01 08:05:38.975 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:38.975 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:38.975 -08 000000054 INF: ===================Camera #2 Frame #37===================
17-03-01 08:05:38.997 -08 000000087 INF: Y Motor: Unshifted Position: 5287500
17-03-01 08:05:39.047 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.139 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:39.139 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:39.139 -08 000000092 INF: ===================Camera #0 Frame #43===================
17-03-01 08:05:39.155 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 43, frameCount = 44.
17-03-01 08:05:39.155 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 44
17-03-01 08:05:39.155 -08 000000054 INF: ===================Camera #2 Frame #44===================
17-03-01 08:05:39.172 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.308 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:05:39.308 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:05:39.308 -08 000000092 INF: ===================Camera #0 Frame #50===================
17-03-01 08:05:39.311 -08 000000087 INF: Y Motor: Unshifted Position: 5085564
17-03-01 08:05:39.328 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:05:39.328 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:05:39.328 -08 000000054 INF: ===================Camera #2 Frame #50===================
17-03-01 08:05:39.361 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.429 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:39.429 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:39.430 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:39.430 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:39.480 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:05:39.480 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:05:39.480 -08 000000092 INF: ===================Camera #0 Frame #56===================
17-03-01 08:05:39.487 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.495 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:39.495 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Selecting Reagent HB2 (6)===================
17-03-01 08:05:39.495 -08 000000018 INF: Valve A1: Go to position 6
17-03-01 08:05:39.495 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:05:39.498 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 56, frameCount = 57.
17-03-01 08:05:39.498 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 57
17-03-01 08:05:39.498 -08 000000054 INF: ===================Camera #2 Frame #57===================
17-03-01 08:05:39.558 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 4\r
17-03-01 08:05:39.558 -08 000000018 INF: Valve A1: 23.382 seconds since last move, > 10.000 seconds required between moves
17-03-01 08:05:39.558 -08 000000018 INF: Valve A1: Taking shortest path 'CW' from 4 to 6
17-03-01 08:05:39.558 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CW6\r
17-03-01 08:05:39.558 -08 000000018 INF: SerialPort A1 (VICIA1): Recv  (discarded)
17-03-01 08:05:39.558 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:05:39.623 -08 000000087 INF: Y Motor: Unshifted Position: 4882550
17-03-01 08:05:39.649 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:39.649 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:39.649 -08 000000092 INF: ===================Camera #0 Frame #62===================
17-03-01 08:05:39.670 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 62, frameCount = 63.
17-03-01 08:05:39.670 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 63
17-03-01 08:05:39.670 -08 000000054 INF: ===================Camera #2 Frame #63===================
17-03-01 08:05:39.673 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.799 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.818 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:39.818 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:39.818 -08 000000092 INF: ===================Camera #0 Frame #68===================
17-03-01 08:05:39.840 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 68, frameCount = 69.
17-03-01 08:05:39.840 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 69
17-03-01 08:05:39.840 -08 000000054 INF: ===================Camera #2 Frame #69===================
17-03-01 08:05:39.932 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 6\r
17-03-01 08:05:39.932 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:39.932 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Opening shutoff valve===================
17-03-01 08:05:39.935 -08 000000087 INF: Y Motor: Unshifted Position: 4678879
17-03-01 08:05:39.985 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:39.987 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:05:39.987 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:05:39.987 -08 000000092 INF: ===================Camera #0 Frame #75===================
17-03-01 08:05:40.009 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:05:40.009 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:05:40.009 -08 000000054 INF: ===================Camera #2 Frame #75===================
17-03-01 08:05:40.111 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:40.159 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:05:40.159 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:05:40.159 -08 000000092 INF: ===================Camera #0 Frame #81===================
17-03-01 08:05:40.178 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 81, frameCount = 82.
17-03-01 08:05:40.178 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 82
17-03-01 08:05:40.178 -08 000000054 INF: ===================Camera #2 Frame #82===================
17-03-01 08:05:40.247 -08 000000087 INF: Y Motor: Unshifted Position: 4476715
17-03-01 08:05:40.297 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:40.327 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:40.327 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:40.327 -08 000000092 INF: ===================Camera #0 Frame #87===================
17-03-01 08:05:40.350 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 87, frameCount = 88.
17-03-01 08:05:40.350 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 88
17-03-01 08:05:40.350 -08 000000054 INF: ===================Camera #2 Frame #88===================
17-03-01 08:05:40.422 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:40.495 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:40.495 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:40.495 -08 000000092 INF: ===================Camera #0 Frame #93===================
17-03-01 08:05:40.519 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 93, frameCount = 94.
17-03-01 08:05:40.519 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 94
17-03-01 08:05:40.519 -08 000000054 INF: ===================Camera #2 Frame #94===================
17-03-01 08:05:40.559 -08 000000087 INF: Y Motor: Unshifted Position: 4273923
17-03-01 08:05:40.609 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:40.663 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:05:40.663 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:05:40.663 -08 000000092 INF: ===================Camera #0 Frame #100===================
17-03-01 08:05:40.690 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:05:40.690 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 101
17-03-01 08:05:40.691 -08 000000054 INF: ===================Camera #2 Frame #101===================
17-03-01 08:05:40.733 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:40.742 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:40.742 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:40.742 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:40.806 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:40.814 -08 000000018 INF: KloehnPump A (KLOEHNA): Pumping from 6, aspirate port PortB, aspiration rate 500, dispense rate 2500, volume 40, calling command "Pumping to Flowcell #1 pump index #0", State=Running, Depth=2, Children=0, Thread="Run", Parent="Buffer Wash", Type=SameThreadBlocking, solution delay 5000
17-03-01 08:05:40.834 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 105, frameCount = 106.
17-03-01 08:05:40.834 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 106
17-03-01 08:05:40.834 -08 000000092 INF: ===================Camera #0 Frame #106===================
17-03-01 08:05:40.863 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 106, frameCount = 107.
17-03-01 08:05:40.863 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 107
17-03-01 08:05:40.863 -08 000000054 INF: ===================Camera #2 Frame #107===================
17-03-01 08:05:40.869 -08 000000087 INF: Y Motor: Unshifted Position: 4070254
17-03-01 08:05:40.906 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:40.919 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:40.996 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`0 (0x03)\r\n(0xFF)
17-03-01 08:05:40.996 -08 000000018 INF: Current Position of Pump is: 0
17-03-01 08:05:41.002 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 111, frameCount = 112.
17-03-01 08:05:41.002 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 112
17-03-01 08:05:41.002 -08 000000092 INF: ===================Camera #0 Frame #112===================
17-03-01 08:05:41.032 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 112, frameCount = 113.
17-03-01 08:05:41.032 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 113
17-03-01 08:05:41.032 -08 000000054 INF: ===================Camera #2 Frame #113===================
17-03-01 08:05:41.047 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.096 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1OR\r
17-03-01 08:05:41.172 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:41.172 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:41.172 -08 000000092 INF: ===================Camera #0 Frame #118===================
17-03-01 08:05:41.182 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:41.183 -08 000000087 INF: Y Motor: Unshifted Position: 3868100
17-03-01 08:05:41.201 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 118, frameCount = 119.
17-03-01 08:05:41.201 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 119
17-03-01 08:05:41.201 -08 000000054 INF: ===================Camera #2 Frame #119===================
17-03-01 08:05:41.233 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.282 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:41.341 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 124, frameCount = 125.
17-03-01 08:05:41.341 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 125
17-03-01 08:05:41.341 -08 000000092 INF: ===================Camera #0 Frame #125===================
17-03-01 08:05:41.357 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.367 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:41.370 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 125, frameCount = 126.
17-03-01 08:05:41.370 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 126
17-03-01 08:05:41.370 -08 000000054 INF: ===================Camera #2 Frame #126===================
17-03-01 08:05:41.495 -08 000000087 INF: Y Motor: Unshifted Position: 3665084
17-03-01 08:05:41.512 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 130, frameCount = 131.
17-03-01 08:05:41.512 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 131
17-03-01 08:05:41.512 -08 000000092 INF: ===================Camera #0 Frame #131===================
17-03-01 08:05:41.542 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 131, frameCount = 132.
17-03-01 08:05:41.542 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 132
17-03-01 08:05:41.542 -08 000000054 INF: ===================Camera #2 Frame #132===================
17-03-01 08:05:41.545 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.617 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:41.669 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.680 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:41.680 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 136, frameCount = 137.
17-03-01 08:05:41.680 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 137
17-03-01 08:05:41.680 -08 000000092 INF: ===================Camera #0 Frame #137===================
17-03-01 08:05:41.711 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 137, frameCount = 138.
17-03-01 08:05:41.711 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 138
17-03-01 08:05:41.711 -08 000000054 INF: ===================Camera #2 Frame #138===================
17-03-01 08:05:41.780 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V10000A0R\r
17-03-01 08:05:41.805 -08 000000087 INF: Y Motor: Unshifted Position: 3461636
17-03-01 08:05:41.848 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 142, frameCount = 143.
17-03-01 08:05:41.848 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 143
17-03-01 08:05:41.848 -08 000000092 INF: ===================Camera #0 Frame #143===================
17-03-01 08:05:41.855 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.866 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:41.880 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 143, frameCount = 144.
17-03-01 08:05:41.880 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 144
17-03-01 08:05:41.880 -08 000000054 INF: ===================Camera #2 Frame #144===================
17-03-01 08:05:41.966 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:41.979 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:41.994 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:41.994 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Aspirating port PortB===================
17-03-01 08:05:42.016 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 148, frameCount = 149.
17-03-01 08:05:42.016 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 149
17-03-01 08:05:42.016 -08 000000092 INF: ===================Camera #0 Frame #149===================
17-03-01 08:05:42.048 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 150, frameCount = 151.
17-03-01 08:05:42.048 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 151
17-03-01 08:05:42.048 -08 000000054 INF: ===================Camera #2 Frame #151===================
17-03-01 08:05:42.094 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V1600IP7680R\r
17-03-01 08:05:42.121 -08 000000087 INF: Y Motor: Unshifted Position: 3258628
17-03-01 08:05:42.171 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:42.180 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:42.184 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 155, frameCount = 156.
17-03-01 08:05:42.184 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 156
17-03-01 08:05:42.184 -08 000000092 INF: ===================Camera #0 Frame #156===================
17-03-01 08:05:42.220 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 156, frameCount = 157.
17-03-01 08:05:42.220 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 157
17-03-01 08:05:42.220 -08 000000054 INF: ===================Camera #2 Frame #157===================
17-03-01 08:05:42.280 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:42.291 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:42.355 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 161, frameCount = 162.
17-03-01 08:05:42.355 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 162
17-03-01 08:05:42.355 -08 000000092 INF: ===================Camera #0 Frame #162===================
17-03-01 08:05:42.365 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:42.389 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 162, frameCount = 163.
17-03-01 08:05:42.389 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 163
17-03-01 08:05:42.389 -08 000000054 INF: ===================Camera #2 Frame #163===================
17-03-01 08:05:42.429 -08 000000087 INF: Y Motor: Unshifted Position: 3056479
17-03-01 08:05:42.479 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:42.525 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 167, frameCount = 168.
17-03-01 08:05:42.525 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 168
17-03-01 08:05:42.525 -08 000000092 INF: ===================Camera #0 Frame #168===================
17-03-01 08:05:42.559 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:05:42.559 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:05:42.559 -08 000000054 INF: ===================Camera #2 Frame #169===================
17-03-01 08:05:42.606 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:42.615 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:42.678 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:42.695 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 173, frameCount = 174.
17-03-01 08:05:42.695 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 174
17-03-01 08:05:42.695 -08 000000092 INF: ===================Camera #0 Frame #174===================
17-03-01 08:05:42.730 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 175, frameCount = 176.
17-03-01 08:05:42.730 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 176
17-03-01 08:05:42.730 -08 000000054 INF: ===================Camera #2 Frame #176===================
17-03-01 08:05:42.741 -08 000000087 INF: Y Motor: Unshifted Position: 2852816
17-03-01 08:05:42.791 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:42.865 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 180, frameCount = 181.
17-03-01 08:05:42.865 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 181
17-03-01 08:05:42.865 -08 000000092 INF: ===================Camera #0 Frame #181===================
17-03-01 08:05:42.903 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 181, frameCount = 182.
17-03-01 08:05:42.903 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 182
17-03-01 08:05:42.903 -08 000000054 INF: ===================Camera #2 Frame #182===================
17-03-01 08:05:42.917 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:42.928 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:42.990 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:43.039 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 186, frameCount = 187.
17-03-01 08:05:43.039 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 187
17-03-01 08:05:43.039 -08 000000092 INF: ===================Camera #0 Frame #187===================
17-03-01 08:05:43.053 -08 000000087 INF: Y Motor: Unshifted Position: 2650020
17-03-01 08:05:43.074 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:05:43.074 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:05:43.074 -08 000000054 INF: ===================Camera #2 Frame #188===================
17-03-01 08:05:43.103 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:43.209 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 192, frameCount = 193.
17-03-01 08:05:43.209 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 193
17-03-01 08:05:43.209 -08 000000092 INF: ===================Camera #0 Frame #193===================
17-03-01 08:05:43.227 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:43.240 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:43.245 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 194, frameCount = 195.
17-03-01 08:05:43.245 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 195
17-03-01 08:05:43.245 -08 000000054 INF: ===================Camera #2 Frame #195===================
17-03-01 08:05:43.302 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:43.365 -08 000000087 INF: Y Motor: Unshifted Position: 2446994
17-03-01 08:05:43.379 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 199, frameCount = 200.
17-03-01 08:05:43.379 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 200
17-03-01 08:05:43.379 -08 000000092 INF: ===================Camera #0 Frame #200===================
17-03-01 08:05:43.415 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:43.419 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 200, frameCount = 201.
17-03-01 08:05:43.419 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 201
17-03-01 08:05:43.419 -08 000000054 INF: ===================Camera #2 Frame #201===================
17-03-01 08:05:43.541 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:43.552 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:43.552 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 205, frameCount = 206.
17-03-01 08:05:43.552 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 206
17-03-01 08:05:43.552 -08 000000092 INF: ===================Camera #0 Frame #206===================
17-03-01 08:05:43.590 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 206, frameCount = 207.
17-03-01 08:05:43.590 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 207
17-03-01 08:05:43.590 -08 000000054 INF: ===================Camera #2 Frame #207===================
17-03-01 08:05:43.614 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:43.677 -08 000000087 INF: Y Motor: Unshifted Position: 2243988
17-03-01 08:05:43.722 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 211, frameCount = 212.
17-03-01 08:05:43.722 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 212
17-03-01 08:05:43.722 -08 000000092 INF: ===================Camera #0 Frame #212===================
17-03-01 08:05:43.727 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:43.761 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 213, frameCount = 214.
17-03-01 08:05:43.761 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 214
17-03-01 08:05:43.761 -08 000000054 INF: ===================Camera #2 Frame #214===================
17-03-01 08:05:43.851 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:43.864 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:43.892 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 217, frameCount = 218.
17-03-01 08:05:43.892 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 218
17-03-01 08:05:43.892 -08 000000092 INF: ===================Camera #0 Frame #218===================
17-03-01 08:05:43.926 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:43.935 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 219, frameCount = 220.
17-03-01 08:05:43.935 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 220
17-03-01 08:05:43.935 -08 000000054 INF: ===================Camera #2 Frame #220===================
17-03-01 08:05:43.991 -08 000000087 INF: Y Motor: Unshifted Position: 2041186
17-03-01 08:05:44.041 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:44.062 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 224, frameCount = 225.
17-03-01 08:05:44.062 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 225
17-03-01 08:05:44.062 -08 000000092 INF: ===================Camera #0 Frame #225===================
17-03-01 08:05:44.106 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 225, frameCount = 226.
17-03-01 08:05:44.106 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 226
17-03-01 08:05:44.106 -08 000000054 INF: ===================Camera #2 Frame #226===================
17-03-01 08:05:44.164 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:44.176 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:44.236 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 230, frameCount = 231.
17-03-01 08:05:44.236 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 231
17-03-01 08:05:44.236 -08 000000092 INF: ===================Camera #0 Frame #231===================
17-03-01 08:05:44.237 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:44.277 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 232, frameCount = 233.
17-03-01 08:05:44.277 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 233
17-03-01 08:05:44.277 -08 000000054 INF: ===================Camera #2 Frame #233===================
17-03-01 08:05:44.302 -08 000000087 INF: Y Motor: Unshifted Position: 1838165
17-03-01 08:05:44.352 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:44.406 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 236, frameCount = 237.
17-03-01 08:05:44.406 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 237
17-03-01 08:05:44.406 -08 000000092 INF: ===================Camera #0 Frame #237===================
17-03-01 08:05:44.451 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 238, frameCount = 239.
17-03-01 08:05:44.451 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 239
17-03-01 08:05:44.451 -08 000000054 INF: ===================Camera #2 Frame #239===================
17-03-01 08:05:44.476 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:44.487 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:44.551 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:44.576 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 243, frameCount = 244.
17-03-01 08:05:44.576 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 244
17-03-01 08:05:44.576 -08 000000092 INF: ===================Camera #0 Frame #244===================
17-03-01 08:05:44.614 -08 000000087 INF: Y Motor: Unshifted Position: 1634715
17-03-01 08:05:44.622 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 244, frameCount = 245.
17-03-01 08:05:44.622 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 245
17-03-01 08:05:44.622 -08 000000054 INF: ===================Camera #2 Frame #245===================
17-03-01 08:05:44.664 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:44.749 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 249, frameCount = 250.
17-03-01 08:05:44.749 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 250
17-03-01 08:05:44.749 -08 000000092 INF: ===================Camera #0 Frame #250===================
17-03-01 08:05:44.787 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:44.792 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 251, frameCount = 252.
17-03-01 08:05:44.792 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 252
17-03-01 08:05:44.792 -08 000000054 INF: ===================Camera #2 Frame #252===================
17-03-01 08:05:44.801 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:44.862 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:44.919 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 255, frameCount = 256.
17-03-01 08:05:44.919 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 256
17-03-01 08:05:44.919 -08 000000092 INF: ===================Camera #0 Frame #256===================
17-03-01 08:05:44.925 -08 000000087 INF: Y Motor: Unshifted Position: 1432342
17-03-01 08:05:44.966 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 257, frameCount = 258.
17-03-01 08:05:44.966 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 258
17-03-01 08:05:44.966 -08 000000054 INF: ===================Camera #2 Frame #258===================
17-03-01 08:05:44.975 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:45.089 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 262, frameCount = 263.
17-03-01 08:05:45.089 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 263
17-03-01 08:05:45.089 -08 000000092 INF: ===================Camera #0 Frame #263===================
17-03-01 08:05:45.101 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:45.112 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:45.136 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 263, frameCount = 264.
17-03-01 08:05:45.136 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 264
17-03-01 08:05:45.136 -08 000000054 INF: ===================Camera #2 Frame #264===================
17-03-01 08:05:45.174 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:45.237 -08 000000087 INF: Y Motor: Unshifted Position: 1229540
17-03-01 08:05:45.262 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 268, frameCount = 269.
17-03-01 08:05:45.262 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 269
17-03-01 08:05:45.262 -08 000000092 INF: ===================Camera #0 Frame #269===================
17-03-01 08:05:45.287 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:45.306 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:05:45.306 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 271
17-03-01 08:05:45.306 -08 000000054 INF: ===================Camera #2 Frame #271===================
17-03-01 08:05:45.359 -08 000000125 INF: FPGA: Recv TDIYWAIT
17-03-01 08:05:45.359 -08 000000009 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:45.361 -08 000000009 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:05:45.362 -08 000000136 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:05:45.362 -08 000000089 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:05:45.362 -08 000000136 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:05:45.362 -08 000000136 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:05:45.362 -08 000000136 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:05:45.362 -08 000000136 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:05:45.362 -08 000000089 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:05:45.362 -08 000000089 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:05:45.362 -08 000000089 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:05:45.363 -08 000000089 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:05:45.411 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:45.424 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:45.431 -08 000000092 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:45.431 -08 000000092 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:45.431 -08 000000092 INF: ===================Camera #0 Frame #272===================
17-03-01 08:05:45.441 -08 000000092 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:45.442 -08 000000092 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:45.485 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:45.551 -08 000000087 INF: Y Motor: Unshifted Position: 1027388
17-03-01 08:05:45.601 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:45.609 -08 000000092 INF: Camera #0 ReleaseBuffer
17-03-01 08:05:45.609 -08 000000054 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:45.609 -08 000000054 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:45.609 -08 000000054 INF: ===================Camera #2 Frame #272===================
17-03-01 08:05:45.609 -08 000000092 INF: ===================Camera TDI===================
17-03-01 08:05:45.612 -08 000000054 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:45.613 -08 000000054 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:45.638 -08 000000092 INF: ======================================
17-03-01 08:05:45.735 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:45.736 -08 000000040 INF: FPGA: Recv EX1MV
17-03-01 08:05:45.736 -08 000000040 INF: FPGA: Recv EX2MV
17-03-01 08:05:45.736 -08 000000089 INF: Excitation Filter 2: Moved 107 steps in 373.9463 ms
17-03-01 08:05:45.736 -08 000000136 INF: Excitation Filter 1: Moved 107 steps in 374.1706 ms
17-03-01 08:05:45.736 -08 000000136 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 374.339 ms
17-03-01 08:05:45.736 -08 000000136 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 374.4146 ms
17-03-01 08:05:45.736 -08 000000089 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 374.0938 ms
17-03-01 08:05:45.737 -08 000000089 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 374.5047 ms
17-03-01 08:05:45.737 -08 000000136 INF: ======================================
17-03-01 08:05:45.737 -08 000000089 INF: ======================================
17-03-01 08:05:45.738 -08 000000087 INF: Y Motor: Unshifted Position: 992269
17-03-01 08:05:45.738 -08 000000087 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:45.738 -08 000000087 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:45.738 -08 000000009 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:45.739 -08 000000009 INF: ======================================
17-03-01 08:05:45.799 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:45.800 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:45.800 -08 000000087 INF: Y Motor: Moved to 14.9227 after 7861 ms
17-03-01 08:05:45.800 -08 000000087 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:45.810 -08 000000054 INF: Camera #2 ReleaseBuffer
17-03-01 08:05:45.810 -08 000000054 INF: ===================Camera TDI===================
17-03-01 08:05:45.845 -08 000000054 INF: ======================================
17-03-01 08:05:45.846 -08 000000116 INF: ===================Camera TDI===================
17-03-01 08:05:45.847 -08 000000116 INF: ======================================
17-03-01 08:05:45.862 -08 000000087 INF: Y Motor: Recv v 4097\r
17-03-01 08:05:45.862 -08 000000087 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:45.862 -08 000000087 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:45.924 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:45.924 -08 000000087 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:45.924 -08 000000087 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:45.986 -08 000000087 INF: Y Motor: Recv v 134217728\r
17-03-01 08:05:45.986 -08 000000087 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:05:45.986 -08 000000087 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:45.986 -08 000000087 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:46.049 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:46.050 -08 000000087 INF: Y Motor: Recv v 0\r
17-03-01 08:05:46.050 -08 000000087 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:46.050 -08 000000087 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:46.050 -08 000000087 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:46.111 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:46.112 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:46.112 -08 000000087 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:46.112 -08 000000087 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:46.172 -08 000000087 INF: Y Motor: Recv ok\r
17-03-01 08:05:46.172 -08 000000087 INF: ======================================
17-03-01 08:05:46.173 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:46.174 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:46.175 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.175 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:05:46.235 -08 000000129 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:05:46.235 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:46.296 -08 000000065 INF: FPGA: Recv TDIYERD 1492269
17-03-01 08:05:46.296 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:05:46.358 -08 000000064 INF: FPGA: Recv ZADCR 35382
17-03-01 08:05:46.358 -08 000000042 INF: At scan end Y pos = 14.923 and Z pos = -0.135. Y moved -48.539 mm
17-03-01 08:05:46.358 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:05:46.361 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:46.420 -08 000000095 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:05:46.420 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:05:46.420 -08 000000042 INF: TDIScan finished after 12586.1439 ms
17-03-01 08:05:46.420 -08 000000042 INF: Image[0]: Y should trigger at 63.462 mm, 2nd row was at 64.370 mm (error = 0.909 mm)
17-03-01 08:05:46.420 -08 000000042 INF: Image[2]: Y should trigger at 63.462 mm, 2nd row was at 64.370 mm (error = 0.909 mm)
17-03-01 08:05:46.421 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:46.422 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.455 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.658 um
17-03-01 08:05:46.456 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.456 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:05:46.482 -08 000000020 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:05:46.482 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.483 -08 000000023 INF: ===================Dither Clean Up Command===================
17-03-01 08:05:46.483 -08 000000124 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:05:46.483 -08 000000121 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:05:46.483 -08 000000044 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:05:46.483 -08 000000121 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:46.484 -08 000000121 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:46.484 -08 000000124 INF: ======================================
17-03-01 08:05:46.484 -08 000000044 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:05:46.484 -08 000000044 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:05:46.484 -08 000000092 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:46.484 -08 000000107 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:46.485 -08 000000092 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:05:46.487 -08 000000107 INF: ===================LFT:Extracting coords===================
17-03-01 08:05:46.512 -08 000000107 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:46.513 -08 000000107 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:05:46.514 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.514 -08 000000148 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.514 -08 000000035 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.514 -08 000000122 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.514 -08 000000093 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:46.514 -08 000000148 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:46.514 -08 000000035 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:46.515 -08 000000122 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:46.547 -08 000000108 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:46.547 -08 000000108 INF: FPGA: Recv ZSEL 
17-03-01 08:05:46.547 -08 000000092 INF: FPGA: Xmit ZDACW 40407\n
17-03-01 08:05:46.547 -08 000000044 INF: ======================================
17-03-01 08:05:46.549 -08 000000121 INF: Y Motor: Recv ok\r
17-03-01 08:05:46.549 -08 000000121 INF: ======================================
17-03-01 08:05:46.590 -08 000000148 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:46.590 -08 000000035 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:46.590 -08 000000093 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:46.591 -08 000000122 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:46.607 -08 000000088 INF: FPGA: Recv ZDACW 
17-03-01 08:05:46.607 -08 000000092 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:05:46.608 -08 000000092 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:05:46.671 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:46.672 -08 000000094 INF: FPGA: Recv TDIBB
17-03-01 08:05:46.672 -08 000000092 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:46.673 -08 000000092 INF: ======================================
17-03-01 08:05:46.733 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:46.743 -08 000000148 INF: LFT found best fwhm score 3.402823E+38 in 152 ms
17-03-01 08:05:46.743 -08 000000148 INF: LFT failed to find passing fwhm score. Highest score found is 3.402823E+38Best Z position will remain -0.156843003649538 in the next cycle, cycle 53 FC:B, C:52,L:4,T
17-03-01 08:05:46.743 -08 000000035 INF: LFT found best fwhm score 2.000017 in 153 ms
17-03-01 08:05:46.743 -08 000000035 INF: LFT found good score at index 5709 with fwhm value 2.000017. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:46.743 -08 000000148 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.743 -08 000000093 INF: LFT found best fwhm score 2.000016 in 153 ms
17-03-01 08:05:46.743 -08 000000035 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.743 -08 000000093 INF: LFT found good score at index 7973 with fwhm value 2.000016. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:46.743 -08 000000122 INF: LFT found best fwhm score 2.080371 in 152 ms
17-03-01 08:05:46.743 -08 000000122 INF: LFT found good score at index 2185 with fwhm value 2.080371. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:46.743 -08 000000148 INF: ======================================
17-03-01 08:05:46.743 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.743 -08 000000035 INF: ======================================
17-03-01 08:05:46.743 -08 000000122 INF: ===================LookupFocusTracking===================
17-03-01 08:05:46.743 -08 000000093 INF: ======================================
17-03-01 08:05:46.744 -08 000000122 INF: ======================================
17-03-01 08:05:46.745 -08 000000107 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:46.746 -08 000000107 INF: LFT weighted average best Z for top surface is at -0.157mm FC:B, C:52,L:4,T
17-03-01 08:05:46.746 -08 000000107 INF: ======================================
17-03-01 08:05:46.747 -08 000000023 INF: ======================================
17-03-01 08:05:46.748 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.749 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:05:46.749 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.749 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:05:46.749 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.749 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:05:46.749 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.750 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:05:46.750 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.750 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308===================
17-03-01 08:05:46.750 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308===================
17-03-01 08:05:46.751 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Aspirating port PortB, Waiting for image analysis===================
17-03-01 08:05:46.751 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Aspirating port PortB===================
17-03-01 08:05:46.751 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:05:46.751 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 1 - X = 76.92664 Y = 39.76308===================
17-03-01 08:05:46.774 -08 000000042 INF: Waited 23 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 0, buffer wait time 0
17-03-01 08:05:46.775 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:46.775 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:46.775 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308===================
17-03-01 08:05:46.775 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:05:46.775 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308===================
17-03-01 08:05:46.791 -08 000000042 INF: Transformed XStagePosition from 78.03464 mm to 78.0097974520177 mm.
17-03-01 08:05:46.824 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5706843560338 mm.
17-03-01 08:05:46.824 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3706843560338 mm.
17-03-01 08:05:46.824 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4614343560338 mm.
17-03-01 08:05:46.853 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1101 Request: {"Cycle":52,"Lane":4,"Tile":1101,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF181","HCSMMF183","HCSMMF199","HCSMMF273"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.853 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.863 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:05:46.863 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:46.863 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -154.1 um, section = D_1
17-03-01 08:05:46.865 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:46.865 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:46.873 -08 000000093 INF: ===================MoveEmissionFilters===================
17-03-01 08:05:46.874 -08 000000023 INF: ===================Move X,Y===================
17-03-01 08:05:46.875 -08 000000023 INF: ===================Move X,Y, Parallel===================
17-03-01 08:05:46.880 -08 000000116 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:46.880 -08 000000135 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:46.880 -08 000000135 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:05:46.881 -08 000000116 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:46.881 -08 000000135 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:05:46.881 -08 000000135 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:46.882 -08 000000135 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:05:46.885 -08 000000153 INF: ===================Move X Motor without settling===================
17-03-01 08:05:46.886 -08 000000054 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:46.886 -08 000000153 INF: X Motor: Xmit PR VM\n
17-03-01 08:05:46.887 -08 000000054 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:46.889 -08 000000154 INF: ===================TDI Scan Setup===================
17-03-01 08:05:46.890 -08 000000031 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:46.891 -08 000000154 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:46.891 -08 000000031 INF: Y Motor: Moving to 64.5707 mm @25.000 mm/sec, started at 14.9227 mm
17-03-01 08:05:46.891 -08 000000031 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:46.891 -08 000000031 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:46.892 -08 000000154 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:46.892 -08 000000154 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:46.892 -08 000000154 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:05:46.893 -08 000000084 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:05:46.893 -08 000000108 INF: ===================Camera Arm TDI===================
17-03-01 08:05:46.893 -08 000000136 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:05:46.894 -08 000000084 INF: ======================================
17-03-01 08:05:46.894 -08 000000136 INF: ======================================
17-03-01 08:05:46.894 -08 000000108 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:46.895 -08 000000108 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:46.896 -08 000000094 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:46.897 -08 000000125 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:05:46.897 -08 000000117 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:46.897 -08 000000128 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:05:46.897 -08 000000125 INF: ======================================
17-03-01 08:05:46.897 -08 000000094 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:05:46.897 -08 000000128 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:05:46.898 -08 000000128 INF: ======================================
17-03-01 08:05:46.899 -08 000000054 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:05:46.899 -08 000000137 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:05:46.899 -08 000000117 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:05:46.900 -08 000000137 INF: ======================================
17-03-01 08:05:46.900 -08 000000054 INF: ======================================
17-03-01 08:05:46.901 -08 000000116 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:05:46.901 -08 000000128 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:05:46.901 -08 000000128 INF: ======================================
17-03-01 08:05:46.902 -08 000000035 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:05:46.903 -08 000000035 INF: ======================================
17-03-01 08:05:46.903 -08 000000116 INF: ======================================
17-03-01 08:05:46.906 -08 000000094 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:05:46.908 -08 000000094 INF: ======================================
17-03-01 08:05:46.909 -08 000000087 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1114 Request: {"Cycle":52,"Lane":4,"Tile":1114,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF258","HCSMMF187","HCSMMF212","HCSMMF221"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.910 -08 000000137 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:05:46.911 -08 000000137 INF: ======================================
17-03-01 08:05:46.913 -08 000000117 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:05:46.916 -08 000000117 INF: ======================================
17-03-01 08:05:46.924 -08 000000117 INF: FPGA: Recv ZSEL 
17-03-01 08:05:46.924 -08 000000093 INF: ======================================
17-03-01 08:05:46.925 -08 000000153 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:05:46.925 -08 000000153 INF: X Motor: Xmit PR VI\n
17-03-01 08:05:46.925 -08 000000154 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:46.926 -08 000000154 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:05:46.930 -08 000000032 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1109 Request: {"Cycle":52,"Lane":4,"Tile":1109,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF192","HCSMMF211","HCSMMF255"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.945 -08 000000111 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1107 Request: {"Cycle":52,"Lane":4,"Tile":1107,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF186","HCSMMF265","HCSMMF259","HCSMMF242"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.963 -08 000000124 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1110 Request: {"Cycle":52,"Lane":4,"Tile":1110,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF236","HCSMMF190","HCSMMF225","HCSMMF256"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.969 -08 000000151 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1102 Request: {"Cycle":52,"Lane":4,"Tile":1102,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF204","HCSMMF202","HCSMMF216","HCSMMF245"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.971 -08 000000140 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1111 Request: {"Cycle":52,"Lane":4,"Tile":1111,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF198","HCSMMF285","HCSMMF220","HCSMMF232"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.972 -08 000000105 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1106 Request: {"Cycle":52,"Lane":4,"Tile":1106,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF268","HCSMMF250","HCSMMF235","HCSMMF219"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.974 -08 000000064 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1105 Request: {"Cycle":52,"Lane":4,"Tile":1105,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF269","HCSMMF224","HCSMMF195","HCSMMF243"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.975 -08 000000139 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1103 Request: {"Cycle":52,"Lane":4,"Tile":1103,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF251","HCSMMF272","HCSMMF178","HCSMMF215"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.976 -08 000000092 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1117 Request: {"Cycle":52,"Lane":4,"Tile":1117,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF246","HCSMMF208","HCSMMF230","HCSMMF252"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.976 -08 000000104 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1112 Request: {"Cycle":52,"Lane":4,"Tile":1112,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF222","HCSMMF257","HCSMMF253","HCSMMF275"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.977 -08 000000109 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1115 Request: {"Cycle":52,"Lane":4,"Tile":1115,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF278","HCSMMF229","HCSMMF200","HCSMMF185"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.978 -08 000000020 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1113 Request: {"Cycle":52,"Lane":4,"Tile":1113,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF280","HCSMMF244","HCSMMF267","HCSMMF188"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.979 -08 000000112 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1108 Request: {"Cycle":52,"Lane":4,"Tile":1108,"Channels":["C","G","A","T"],"MemoryMappedFileNames":["HCSMMF180","HCSMMF218","HCSMMF237","HCSMMF261"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.980 -08 000000129 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1118 Request: {"Cycle":52,"Lane":4,"Tile":1118,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF283","HCSMMF191","HCSMMF201","HCSMMF184"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.980 -08 000000145 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1125 Request: {"Cycle":52,"Lane":4,"Tile":1125,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF266","HCSMMF249","HCSMMF210","HCSMMF196"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.981 -08 000000088 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1124 Request: {"Cycle":52,"Lane":4,"Tile":1124,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF179","HCSMMF231","HCSMMF240","HCSMMF189"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.982 -08 000000125 INF: FPGA: Recv TDIBB
17-03-01 08:05:46.982 -08 000000154 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:05:46.982 -08 000000059 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1104 Request: {"Cycle":52,"Lane":4,"Tile":1104,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF286","HCSMMF287","HCSMMF254","HCSMMF281"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.983 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:46.983 -08 000000148 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1120 Request: {"Cycle":52,"Lane":4,"Tile":1120,"Channels":["C","G","A","T"],"MemoryMappedFileNames":["HCSMMF193","HCSMMF276","HCSMMF248","HCSMMF203"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.984 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:05:46.984 -08 000000031 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:46.984 -08 000000031 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:46.984 -08 000000153 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:05:46.984 -08 000000153 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:05:46.984 -08 000000154 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:05:46.984 -08 000000153 INF: X Motor: Moving to 78.0098 mm @15.000 mm/sec, started at 76.9102 mm
17-03-01 08:05:46.984 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1119 Request: {"Cycle":52,"Lane":4,"Tile":1119,"Channels":["G","T","A","C"],"MemoryMappedFileNames":["HCSMMF213","HCSMMF226","HCSMMF263","HCSMMF279"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.984 -08 000000154 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:46.984 -08 000000153 INF: X Motor: Xmit MA 7786\n
17-03-01 08:05:46.985 -08 000000144 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1121 Request: {"Cycle":52,"Lane":4,"Tile":1121,"Channels":["C","A","G","T"],"MemoryMappedFileNames":["HCSMMF284","HCSMMF241","HCSMMF270","HCSMMF197"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.986 -08 000000122 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1122 Request: {"Cycle":52,"Lane":4,"Tile":1122,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF194","HCSMMF176","HCSMMF214","HCSMMF228"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.986 -08 000000154 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:05:46.986 -08 000000154 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:05:46.986 -08 000000154 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:05:46.986 -08 000000065 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1128 Request: {"Cycle":52,"Lane":4,"Tile":1128,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF223","HCSMMF277","HCSMMF233","HCSMMF262"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.988 -08 000000121 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1123 Request: {"Cycle":52,"Lane":4,"Tile":1123,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF206","HCSMMF227","HCSMMF239","HCSMMF217"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.990 -08 000000150 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1116 Request: {"Cycle":52,"Lane":4,"Tile":1116,"Channels":["G","T","C","A"],"MemoryMappedFileNames":["HCSMMF274","HCSMMF271","HCSMMF207","HCSMMF282"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.991 -08 000000094 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1127 Request: {"Cycle":52,"Lane":4,"Tile":1127,"Channels":["T","G","C","A"],"MemoryMappedFileNames":["HCSMMF177","HCSMMF238","HCSMMF234","HCSMMF182"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.993 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1126 Request: {"Cycle":52,"Lane":4,"Tile":1126,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF209","HCSMMF247","HCSMMF205","HCSMMF260"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:05:46.996 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:47.002 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:05:47.046 -08 000000128 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:47.047 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:47.047 -08 000000154 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:47.048 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:05:47.048 -08 000000031 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:47.048 -08 000000154 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:05:47.049 -08 000000153 INF: X Motor: Recv MA 7786\r\n>
17-03-01 08:05:47.049 -08 000000154 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:47.049 -08 000000153 INF: X Motor: WaitUntilStopped 60073
17-03-01 08:05:47.050 -08 000000154 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:05:47.051 -08 000000154 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:05:47.051 -08 000000154 INF: Z Motor: Arming to move to -0.1141 mm
17-03-01 08:05:47.051 -08 000000154 INF: FPGA: Xmit ZYT 6437068 4\n
17-03-01 08:05:47.108 -08 000000095 INF: FPGA: Recv ZYT 
17-03-01 08:05:47.108 -08 000000154 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492269 enc / 14.923 mm / ) = 6437068 enc / 64.371 mm
17-03-01 08:05:47.108 -08 000000154 INF: FPGA: Xmit ZARM 29921\n
17-03-01 08:05:47.110 -08 000000031 INF: Y Motor: Recv v 0\r
17-03-01 08:05:47.110 -08 000000031 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:47.171 -08 000000105 INF: FPGA: Recv ZARM
17-03-01 08:05:47.171 -08 000000154 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 62.9373 ms
17-03-01 08:05:47.171 -08 000000154 INF: Z Motor: ArmAbsStepped took 120.3964 ms
17-03-01 08:05:47.203 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:47.203 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:05:47.203 -08 000000154 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:05:47.203 -08 000000031 INF: Y Motor: Set target position to 5957068 encoder counts
17-03-01 08:05:47.203 -08 000000031 INF: Y Motor: Xmit s r0xca 5957068\r
17-03-01 08:05:47.204 -08 000000154 INF: ===================TDI Scan Setup===================
17-03-01 08:05:47.206 -08 000000154 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:05:47.206 -08 000000154 INF: ===================TDI Scan Setup===================
17-03-01 08:05:47.208 -08 000000154 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:05:47.208 -08 000000154 INF: ===================TDI Scan Setup===================
17-03-01 08:05:47.209 -08 000000154 INF: ======================================
17-03-01 08:05:47.237 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:05:47.237 -08 000000031 INF: Y Motor: Start the move command
17-03-01 08:05:47.237 -08 000000031 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:47.241 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:47.247 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:05:47.297 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:05:47.297 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:47.297 -08 000000031 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:05:47.297 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:47.345 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:47.351 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:05:47.358 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:47.421 -08 000000031 INF: Y Motor: Unshifted Position: 1071244
17-03-01 08:05:47.432 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:47.438 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:05:47.471 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:47.502 -08 000000108 INF: Camera #0 AttachBuffer (imageDataPtr = 60599242800 imgPtr = 60599242800 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:47.502 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:47.502 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:47.506 -08 000000095 INF: RunCopyService queue size at 3/1/2017 8:05:47 AM is 11
17-03-01 08:05:47.523 -08 000000108 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:47.525 -08 000000108 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:05:47.623 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:47.626 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:47.678 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:47.686 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:47.749 -08 000000153 INF: X Motor: Xmit PR ER\n
17-03-01 08:05:47.811 -08 000000153 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:05:47.811 -08 000000031 INF: Y Motor: Unshifted Position: 1968949
17-03-01 08:05:47.811 -08 000000153 INF: X Motor: Moved to 78.0088 after 762 ms
17-03-01 08:05:47.812 -08 000000153 INF: ======================================
17-03-01 08:05:47.861 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:47.907 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:05:47.936 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:47.985 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:47.998 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:47.998 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:47.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:47.999 -08 000000018 INF: WaitCommand(5000) start
17-03-01 08:05:47.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Delay 5 of 5 seconds left===================
17-03-01 08:05:48.123 -08 000000031 INF: Y Motor: Unshifted Position: 2749759
17-03-01 08:05:48.173 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:48.222 -08 000000108 INF: Camera #2 AttachBuffer (imageDataPtr = 62411182128 imgPtr = 63317151792 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:05:48.222 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:05:48.223 -08 000000108 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:05:48.239 -08 000000108 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:05:48.241 -08 000000108 INF: ===================Camera Arm TDI===================
17-03-01 08:05:48.243 -08 000000108 INF: ======================================
17-03-01 08:05:48.245 -08 000000135 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:05:48.246 -08 000000135 INF: ======================================
17-03-01 08:05:48.297 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:48.436 -08 000000031 INF: Y Motor: Unshifted Position: 3532248
17-03-01 08:05:48.486 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:48.609 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:48.750 -08 000000031 INF: Y Motor: Unshifted Position: 4318127
17-03-01 08:05:48.800 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:48.922 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:48.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:48.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Delay 4 of 5 seconds left===================
17-03-01 08:05:49.058 -08 000000031 INF: Y Motor: Unshifted Position: 5088061
17-03-01 08:05:49.108 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:49.235 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:49.371 -08 000000031 INF: Y Motor: Unshifted Position: 5829482
17-03-01 08:05:49.421 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:49.546 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:49.682 -08 000000031 INF: Y Motor: Unshifted Position: 5957069
17-03-01 08:05:49.682 -08 000000031 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:49.682 -08 000000031 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:49.747 -08 000000031 INF: Y Motor: Recv v 0\r
17-03-01 08:05:49.747 -08 000000031 INF: Y Motor: Moved to 64.5707 after 2450 ms
17-03-01 08:05:49.747 -08 000000031 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:49.809 -08 000000031 INF: Y Motor: Recv v 4096\r
17-03-01 08:05:49.809 -08 000000031 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:49.809 -08 000000031 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:49.871 -08 000000031 INF: Y Motor: Recv v 0\r
17-03-01 08:05:49.871 -08 000000031 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:49.871 -08 000000031 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:49.933 -08 000000031 INF: Y Motor: Recv v 402653184\r
17-03-01 08:05:49.933 -08 000000031 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:05:49.933 -08 000000031 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:49.933 -08 000000031 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:49.995 -08 000000031 INF: Y Motor: Recv v 0\r
17-03-01 08:05:49.995 -08 000000031 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:49.995 -08 000000031 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:49.995 -08 000000031 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:49.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:49.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Delay 3 of 5 seconds left===================
17-03-01 08:05:50.057 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:05:50.057 -08 000000031 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:50.057 -08 000000031 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:50.119 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:05:50.119 -08 000000031 INF: ======================================
17-03-01 08:05:50.120 -08 000000023 INF: ===================Move X,Y===================
17-03-01 08:05:50.121 -08 000000023 INF: ======================================
17-03-01 08:05:50.122 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:05:50.123 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:50.123 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:05:50.123 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:05:50.181 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:05:50.181 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:05:50.244 -08 000000144 INF: FPGA: Recv ZFREQCL
17-03-01 08:05:50.244 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:05:50.244 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:50.245 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:50.306 -08 000000036 INF: FPGA: Recv TDIYERD 6457070
17-03-01 08:05:50.306 -08 000000042 INF: Before scan, Y encoder from FPGA = 6457070 counts (64.571 mm)
17-03-01 08:05:50.307 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:50.307 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:50.308 -08 000000117 INF: ===================Set YMotor gains for scans===================
17-03-01 08:05:50.308 -08 000000032 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:50.309 -08 000000117 INF: ======================================
17-03-01 08:05:50.309 -08 000000032 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:50.310 -08 000000032 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:05:50.310 -08 000000032 INF: FPGA: Xmit TDIYPOS 6346143\n
17-03-01 08:05:50.368 -08 000000088 INF: FPGA: Recv TDIYPOS
17-03-01 08:05:50.369 -08 000000032 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:50.371 -08 000000032 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:05:50.371 -08 000000032 INF: FPGA: Xmit TDIYARM3 139264 6437068 1 1\n
17-03-01 08:05:50.430 -08 000000139 INF: FPGA: Recv TDIYARM3
17-03-01 08:05:50.430 -08 000000032 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:05:50.432 -08 000000032 INF: ===================TDI FPGA Arm===================
17-03-01 08:05:50.433 -08 000000032 INF: ======================================
17-03-01 08:05:50.434 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:05:50.434 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:50.435 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:50.435 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:50.436 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:50.436 -08 000000106 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:05:50.437 -08 000000097 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:05:50.437 -08 000000106 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:05:50.437 -08 000000106 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:05:50.437 -08 000000106 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:05:50.437 -08 000000106 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:05:50.437 -08 000000097 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:05:50.437 -08 000000097 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:05:50.437 -08 000000097 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:05:50.438 -08 000000097 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:05:50.804 -08 000000089 INF: FPGA: Recv EX2MV
17-03-01 08:05:50.804 -08 000000089 INF: FPGA: Recv EX1MV
17-03-01 08:05:50.804 -08 000000106 INF: Excitation Filter 2: Moved -107 steps in 367.1694 ms
17-03-01 08:05:50.804 -08 000000106 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 367.3013 ms
17-03-01 08:05:50.804 -08 000000106 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 367.3716 ms
17-03-01 08:05:50.804 -08 000000097 INF: Excitation Filter 1: Moved -107 steps in 366.982 ms
17-03-01 08:05:50.804 -08 000000097 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 367.434 ms
17-03-01 08:05:50.804 -08 000000097 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 367.5401 ms
17-03-01 08:05:50.804 -08 000000106 INF: ======================================
17-03-01 08:05:50.805 -08 000000097 INF: ======================================
17-03-01 08:05:50.806 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:50.807 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:50.808 -08 000000104 INF: ===================Camera TDI===================
17-03-01 08:05:50.808 -08 000000154 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:50.808 -08 000000036 INF: ===================FPGA Z Wait===================
17-03-01 08:05:50.808 -08 000000020 INF: ===================Move Y Motor without settling===================
17-03-01 08:05:50.808 -08 000000036 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:05:50.808 -08 000000020 INF: Y Motor: Moving to 14.9223 mm @6.500 mm/sec, started at 64.5707 mm
17-03-01 08:05:50.808 -08 000000020 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:05:50.808 -08 000000020 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:50.808 -08 000000154 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:05:50.809 -08 000000154 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:05:50.809 -08 000000104 INF: ===================Camera TDI, Parallel===================
17-03-01 08:05:50.810 -08 000000094 INF: ===================Camera TDI===================
17-03-01 08:05:50.810 -08 000000153 INF: ===================Camera TDI===================
17-03-01 08:05:50.811 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:50.811 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:50.812 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:50.812 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:50.869 -08 000000020 INF: Y Motor: Recv ok\r
17-03-01 08:05:50.869 -08 000000020 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:05:50.869 -08 000000020 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:50.931 -08 000000020 INF: Y Motor: Recv ok\r
17-03-01 08:05:50.931 -08 000000020 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:50.961 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:50.961 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:50.962 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:50.962 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:50.993 -08 000000020 INF: Y Motor: Recv v 0\r
17-03-01 08:05:50.993 -08 000000020 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:50.993 -08 000000020 INF: Y Motor: Set target position to 992235 encoder counts
17-03-01 08:05:50.993 -08 000000020 INF: Y Motor: Xmit s r0xca 992235\r
17-03-01 08:05:50.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:50.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Delay 2 of 5 seconds left===================
17-03-01 08:05:51.055 -08 000000020 INF: Y Motor: Recv ok\r
17-03-01 08:05:51.055 -08 000000020 INF: Y Motor: Start the move command
17-03-01 08:05:51.055 -08 000000020 INF: Y Motor: Xmit t 1\r
17-03-01 08:05:51.111 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:51.111 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:51.112 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:05:51.112 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:05:51.119 -08 000000020 INF: Y Motor: Recv ok\r
17-03-01 08:05:51.119 -08 000000020 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:05:51.119 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:51.178 -08 000000121 INF: FPGA: Recv ZWAIT 
17-03-01 08:05:51.178 -08 000000036 INF: ======================================
17-03-01 08:05:51.242 -08 000000020 INF: Y Motor: Unshifted Position: 5894568
17-03-01 08:05:51.261 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:51.261 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:51.261 -08 000000153 INF: ===================Camera #2 Frame #5===================
17-03-01 08:05:51.262 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 4, frameCount = 5.
17-03-01 08:05:51.262 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 5
17-03-01 08:05:51.262 -08 000000094 INF: ===================Camera #0 Frame #5===================
17-03-01 08:05:51.292 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:51.419 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:51.428 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:51.428 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:51.428 -08 000000094 INF: ===================Camera #0 Frame #11===================
17-03-01 08:05:51.432 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 10, frameCount = 11.
17-03-01 08:05:51.432 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 11
17-03-01 08:05:51.432 -08 000000153 INF: ===================Camera #2 Frame #11===================
17-03-01 08:05:51.554 -08 000000020 INF: Y Motor: Unshifted Position: 5690901
17-03-01 08:05:51.605 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:51.606 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:05:51.606 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:05:51.606 -08 000000094 INF: ===================Camera #0 Frame #17===================
17-03-01 08:05:51.610 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 16, frameCount = 17.
17-03-01 08:05:51.610 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 17
17-03-01 08:05:51.610 -08 000000153 INF: ===================Camera #2 Frame #17===================
17-03-01 08:05:51.731 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:51.774 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 22, frameCount = 23.
17-03-01 08:05:51.774 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 23
17-03-01 08:05:51.774 -08 000000094 INF: ===================Camera #0 Frame #23===================
17-03-01 08:05:51.779 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 23, frameCount = 24.
17-03-01 08:05:51.779 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 24
17-03-01 08:05:51.779 -08 000000153 INF: ===================Camera #2 Frame #24===================
17-03-01 08:05:51.867 -08 000000020 INF: Y Motor: Unshifted Position: 5487452
17-03-01 08:05:51.917 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:51.950 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:05:51.950 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:05:51.950 -08 000000094 INF: ===================Camera #0 Frame #30===================
17-03-01 08:05:51.961 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 29, frameCount = 30.
17-03-01 08:05:51.961 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 30
17-03-01 08:05:51.961 -08 000000153 INF: ===================Camera #2 Frame #30===================
17-03-01 08:05:51.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:51.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Delay 1 of 5 seconds left===================
17-03-01 08:05:52.041 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.130 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:52.130 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:52.130 -08 000000094 INF: ===================Camera #0 Frame #37===================
17-03-01 08:05:52.138 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 36, frameCount = 37.
17-03-01 08:05:52.138 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 37
17-03-01 08:05:52.138 -08 000000153 INF: ===================Camera #2 Frame #37===================
17-03-01 08:05:52.180 -08 000000020 INF: Y Motor: Unshifted Position: 5284438
17-03-01 08:05:52.230 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.309 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:52.309 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:52.309 -08 000000094 INF: ===================Camera #0 Frame #43===================
17-03-01 08:05:52.313 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 42, frameCount = 43.
17-03-01 08:05:52.313 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 43
17-03-01 08:05:52.313 -08 000000153 INF: ===================Camera #2 Frame #43===================
17-03-01 08:05:52.354 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.478 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 48, frameCount = 49.
17-03-01 08:05:52.478 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 49
17-03-01 08:05:52.478 -08 000000094 INF: ===================Camera #0 Frame #49===================
17-03-01 08:05:52.482 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 49, frameCount = 50.
17-03-01 08:05:52.482 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 50
17-03-01 08:05:52.482 -08 000000153 INF: ===================Camera #2 Frame #50===================
17-03-01 08:05:52.490 -08 000000020 INF: Y Motor: Unshifted Position: 5082710
17-03-01 08:05:52.540 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.647 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:05:52.647 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:05:52.647 -08 000000094 INF: ===================Camera #0 Frame #56===================
17-03-01 08:05:52.655 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 55, frameCount = 56.
17-03-01 08:05:52.655 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 56
17-03-01 08:05:52.655 -08 000000153 INF: ===================Camera #2 Frame #56===================
17-03-01 08:05:52.667 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.803 -08 000000020 INF: Y Motor: Unshifted Position: 4879266
17-03-01 08:05:52.819 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:52.819 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:52.819 -08 000000094 INF: ===================Camera #0 Frame #62===================
17-03-01 08:05:52.824 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 61, frameCount = 62.
17-03-01 08:05:52.824 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 62
17-03-01 08:05:52.824 -08 000000153 INF: ===================Camera #2 Frame #62===================
17-03-01 08:05:52.853 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.977 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:52.988 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:52.988 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:52.988 -08 000000094 INF: ===================Camera #0 Frame #68===================
17-03-01 08:05:52.993 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 67, frameCount = 68.
17-03-01 08:05:52.993 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 68
17-03-01 08:05:52.993 -08 000000153 INF: ===================Camera #2 Frame #68===================
17-03-01 08:05:52.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:52.999 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Delay 0 of 5 seconds left===================
17-03-01 08:05:53.000 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:53.000 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:53.000 -08 000000018 INF: WaitCommand(5000) end
17-03-01 08:05:53.000 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:53.098 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:53.116 -08 000000020 INF: Y Motor: Unshifted Position: 4675817
17-03-01 08:05:53.156 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 73, frameCount = 74.
17-03-01 08:05:53.156 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 74
17-03-01 08:05:53.156 -08 000000094 INF: ===================Camera #0 Frame #74===================
17-03-01 08:05:53.162 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 74, frameCount = 75.
17-03-01 08:05:53.162 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 75
17-03-01 08:05:53.162 -08 000000153 INF: ===================Camera #2 Frame #75===================
17-03-01 08:05:53.166 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:53.177 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`7680 (0x03)\r\n(0xFF)
17-03-01 08:05:53.177 -08 000000018 INF: Current Position of Pump is: 7680
17-03-01 08:05:53.277 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:53.290 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:53.325 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:05:53.325 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:05:53.325 -08 000000094 INF: ===================Camera #0 Frame #81===================
17-03-01 08:05:53.335 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 80, frameCount = 81.
17-03-01 08:05:53.335 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 81
17-03-01 08:05:53.335 -08 000000153 INF: ===================Camera #2 Frame #81===================
17-03-01 08:05:53.364 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`7680 (0x03)\r\n(0xFF)
17-03-01 08:05:53.364 -08 000000018 INF: Current Position of Pump is: 7680
17-03-01 08:05:53.364 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6), Dispensing port PortC===================
17-03-01 08:05:53.428 -08 000000020 INF: Y Motor: Unshifted Position: 4474082
17-03-01 08:05:53.464 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V8000OD7680R\r
17-03-01 08:05:53.478 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:53.496 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:53.496 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:53.496 -08 000000094 INF: ===================Camera #0 Frame #87===================
17-03-01 08:05:53.504 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 86, frameCount = 87.
17-03-01 08:05:53.504 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 87
17-03-01 08:05:53.504 -08 000000153 INF: ===================Camera #2 Frame #87===================
17-03-01 08:05:53.551 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:53.603 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:53.651 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:53.664 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:53.664 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:53.664 -08 000000094 INF: ===================Camera #0 Frame #93===================
17-03-01 08:05:53.673 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 92, frameCount = 93.
17-03-01 08:05:53.673 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 93
17-03-01 08:05:53.673 -08 000000153 INF: ===================Camera #2 Frame #93===================
17-03-01 08:05:53.739 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:53.742 -08 000000020 INF: Y Motor: Unshifted Position: 4269991
17-03-01 08:05:53.792 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:53.833 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 98, frameCount = 99.
17-03-01 08:05:53.833 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 99
17-03-01 08:05:53.833 -08 000000094 INF: ===================Camera #0 Frame #99===================
17-03-01 08:05:53.842 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 99, frameCount = 100.
17-03-01 08:05:53.842 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 100
17-03-01 08:05:53.842 -08 000000153 INF: ===================Camera #2 Frame #100===================
17-03-01 08:05:53.914 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:53.989 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:54.001 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 104, frameCount = 105.
17-03-01 08:05:54.001 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 105
17-03-01 08:05:54.001 -08 000000094 INF: ===================Camera #0 Frame #105===================
17-03-01 08:05:54.015 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 105, frameCount = 106.
17-03-01 08:05:54.015 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 106
17-03-01 08:05:54.015 -08 000000153 INF: ===================Camera #2 Frame #106===================
17-03-01 08:05:54.050 -08 000000020 INF: Y Motor: Unshifted Position: 4068268
17-03-01 08:05:54.050 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:54.100 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:54.169 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 111, frameCount = 112.
17-03-01 08:05:54.169 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 112
17-03-01 08:05:54.169 -08 000000094 INF: ===================Camera #0 Frame #112===================
17-03-01 08:05:54.184 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 111, frameCount = 112.
17-03-01 08:05:54.184 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 112
17-03-01 08:05:54.184 -08 000000153 INF: ===================Camera #2 Frame #112===================
17-03-01 08:05:54.228 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:54.300 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:54.340 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:54.340 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:54.340 -08 000000094 INF: ===================Camera #0 Frame #118===================
17-03-01 08:05:54.353 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 117, frameCount = 118.
17-03-01 08:05:54.353 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 118
17-03-01 08:05:54.353 -08 000000153 INF: ===================Camera #2 Frame #118===================
17-03-01 08:05:54.363 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:54.364 -08 000000020 INF: Y Motor: Unshifted Position: 3864171
17-03-01 08:05:54.414 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:54.508 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 123, frameCount = 124.
17-03-01 08:05:54.508 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 124
17-03-01 08:05:54.508 -08 000000094 INF: ===================Camera #0 Frame #124===================
17-03-01 08:05:54.522 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 124, frameCount = 125.
17-03-01 08:05:54.522 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 125
17-03-01 08:05:54.522 -08 000000153 INF: ===================Camera #2 Frame #125===================
17-03-01 08:05:54.538 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:54.613 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:54.675 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:54.676 -08 000000020 INF: Y Motor: Unshifted Position: 3661146
17-03-01 08:05:54.676 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 129, frameCount = 130.
17-03-01 08:05:54.676 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 130
17-03-01 08:05:54.676 -08 000000094 INF: ===================Camera #0 Frame #130===================
17-03-01 08:05:54.694 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 130, frameCount = 131.
17-03-01 08:05:54.694 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 131
17-03-01 08:05:54.694 -08 000000153 INF: ===================Camera #2 Frame #131===================
17-03-01 08:05:54.726 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:54.844 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 135, frameCount = 136.
17-03-01 08:05:54.844 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 136
17-03-01 08:05:54.844 -08 000000094 INF: ===================Camera #0 Frame #136===================
17-03-01 08:05:54.850 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:54.865 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 136, frameCount = 137.
17-03-01 08:05:54.865 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 137
17-03-01 08:05:54.866 -08 000000153 INF: ===================Camera #2 Frame #137===================
17-03-01 08:05:54.925 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:54.985 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:54.985 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Pumping Reagent HB2 (6)===================
17-03-01 08:05:54.985 -08 000000018 INF: KloehnPump A (KLOEHNA): Waiting 1000 ms before setting solenoid valve back to 'aspirate' position after PumpSolution
17-03-01 08:05:54.986 -08 000000020 INF: Y Motor: Unshifted Position: 3459649
17-03-01 08:05:55.012 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 142, frameCount = 143.
17-03-01 08:05:55.012 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 143
17-03-01 08:05:55.012 -08 000000094 INF: ===================Camera #0 Frame #143===================
17-03-01 08:05:55.034 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 142, frameCount = 143.
17-03-01 08:05:55.034 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 143
17-03-01 08:05:55.034 -08 000000153 INF: ===================Camera #2 Frame #143===================
17-03-01 08:05:55.036 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:55.164 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:55.183 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 148, frameCount = 149.
17-03-01 08:05:55.183 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 149
17-03-01 08:05:55.183 -08 000000094 INF: ===================Camera #0 Frame #149===================
17-03-01 08:05:55.203 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 149, frameCount = 150.
17-03-01 08:05:55.203 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 150
17-03-01 08:05:55.203 -08 000000153 INF: ===================Camera #2 Frame #150===================
17-03-01 08:05:55.300 -08 000000020 INF: Y Motor: Unshifted Position: 3255344
17-03-01 08:05:55.350 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:55.351 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 154, frameCount = 155.
17-03-01 08:05:55.351 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 155
17-03-01 08:05:55.351 -08 000000094 INF: ===================Camera #0 Frame #155===================
17-03-01 08:05:55.375 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 155, frameCount = 156.
17-03-01 08:05:55.375 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 156
17-03-01 08:05:55.375 -08 000000153 INF: ===================Camera #2 Frame #156===================
17-03-01 08:05:55.474 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:55.519 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 160, frameCount = 161.
17-03-01 08:05:55.519 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 161
17-03-01 08:05:55.519 -08 000000094 INF: ===================Camera #0 Frame #161===================
17-03-01 08:05:55.545 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 161, frameCount = 162.
17-03-01 08:05:55.545 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 162
17-03-01 08:05:55.545 -08 000000153 INF: ===================Camera #2 Frame #162===================
17-03-01 08:05:55.611 -08 000000020 INF: Y Motor: Unshifted Position: 3053188
17-03-01 08:05:55.661 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:55.689 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 167, frameCount = 168.
17-03-01 08:05:55.689 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 168
17-03-01 08:05:55.689 -08 000000094 INF: ===================Camera #0 Frame #168===================
17-03-01 08:05:55.716 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 168, frameCount = 169.
17-03-01 08:05:55.716 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 169
17-03-01 08:05:55.716 -08 000000153 INF: ===================Camera #2 Frame #169===================
17-03-01 08:05:55.788 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:55.862 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 173, frameCount = 174.
17-03-01 08:05:55.862 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 174
17-03-01 08:05:55.862 -08 000000094 INF: ===================Camera #0 Frame #174===================
17-03-01 08:05:55.890 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 174, frameCount = 175.
17-03-01 08:05:55.890 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 175
17-03-01 08:05:55.890 -08 000000153 INF: ===================Camera #2 Frame #175===================
17-03-01 08:05:55.924 -08 000000020 INF: Y Motor: Unshifted Position: 2849528
17-03-01 08:05:55.974 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.032 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 179, frameCount = 180.
17-03-01 08:05:56.032 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 180
17-03-01 08:05:56.032 -08 000000094 INF: ===================Camera #0 Frame #180===================
17-03-01 08:05:56.061 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 180, frameCount = 181.
17-03-01 08:05:56.061 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 181
17-03-01 08:05:56.061 -08 000000153 INF: ===================Camera #2 Frame #181===================
17-03-01 08:05:56.085 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1IR\r
17-03-01 08:05:56.098 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.171 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:56.202 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 185, frameCount = 186.
17-03-01 08:05:56.202 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 186
17-03-01 08:05:56.202 -08 000000094 INF: ===================Camera #0 Frame #186===================
17-03-01 08:05:56.232 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 187, frameCount = 188.
17-03-01 08:05:56.232 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 188
17-03-01 08:05:56.232 -08 000000153 INF: ===================Camera #2 Frame #188===================
17-03-01 08:05:56.234 -08 000000020 INF: Y Motor: Unshifted Position: 2648037
17-03-01 08:05:56.271 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:56.284 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.361 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:56.372 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 192, frameCount = 193.
17-03-01 08:05:56.372 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 193
17-03-01 08:05:56.372 -08 000000094 INF: ===================Camera #0 Frame #193===================
17-03-01 08:05:56.405 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 193, frameCount = 194.
17-03-01 08:05:56.405 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 194
17-03-01 08:05:56.405 -08 000000153 INF: ===================Camera #2 Frame #194===================
17-03-01 08:05:56.412 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.545 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 198, frameCount = 199.
17-03-01 08:05:56.545 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 199
17-03-01 08:05:56.545 -08 000000094 INF: ===================Camera #0 Frame #199===================
17-03-01 08:05:56.548 -08 000000020 INF: Y Motor: Unshifted Position: 2443712
17-03-01 08:05:56.575 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 199, frameCount = 200.
17-03-01 08:05:56.575 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 200
17-03-01 08:05:56.575 -08 000000153 INF: ===================Camera #2 Frame #200===================
17-03-01 08:05:56.598 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.611 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:56.673 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:56.673 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:56.673 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash, Closing shutoff valve===================
17-03-01 08:05:56.715 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 204, frameCount = 205.
17-03-01 08:05:56.715 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 205
17-03-01 08:05:56.715 -08 000000094 INF: ===================Camera #0 Frame #205===================
17-03-01 08:05:56.724 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.746 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 206, frameCount = 207.
17-03-01 08:05:56.746 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 207
17-03-01 08:05:56.746 -08 000000153 INF: ===================Camera #2 Frame #207===================
17-03-01 08:05:56.863 -08 000000020 INF: Y Motor: Unshifted Position: 2240273
17-03-01 08:05:56.885 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 211, frameCount = 212.
17-03-01 08:05:56.885 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 212
17-03-01 08:05:56.885 -08 000000094 INF: ===================Camera #0 Frame #212===================
17-03-01 08:05:56.913 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:56.918 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 212, frameCount = 213.
17-03-01 08:05:56.918 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 213
17-03-01 08:05:56.918 -08 000000153 INF: ===================Camera #2 Frame #213===================
17-03-01 08:05:57.034 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.058 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 217, frameCount = 218.
17-03-01 08:05:57.058 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 218
17-03-01 08:05:57.058 -08 000000094 INF: ===================Camera #0 Frame #218===================
17-03-01 08:05:57.089 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 218, frameCount = 219.
17-03-01 08:05:57.089 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 219
17-03-01 08:05:57.089 -08 000000153 INF: ===================Camera #2 Frame #219===================
17-03-01 08:05:57.170 -08 000000020 INF: Y Motor: Unshifted Position: 2039204
17-03-01 08:05:57.220 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.228 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 223, frameCount = 224.
17-03-01 08:05:57.228 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 224
17-03-01 08:05:57.228 -08 000000094 INF: ===================Camera #0 Frame #224===================
17-03-01 08:05:57.260 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 224, frameCount = 225.
17-03-01 08:05:57.260 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 225
17-03-01 08:05:57.260 -08 000000153 INF: ===================Camera #2 Frame #225===================
17-03-01 08:05:57.350 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.357 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:57.357 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:57.357 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Buffer Wash===================
17-03-01 08:05:57.358 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle===================
17-03-01 08:05:57.359 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:57.359 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:57.360 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:57.360 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°===================
17-03-01 08:05:57.360 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°===================
17-03-01 08:05:57.360 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°, FC temperature to 60°===================
17-03-01 08:05:57.398 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 230, frameCount = 231.
17-03-01 08:05:57.398 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 231
17-03-01 08:05:57.398 -08 000000094 INF: ===================Camera #0 Frame #231===================
17-03-01 08:05:57.431 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 231, frameCount = 232.
17-03-01 08:05:57.431 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 232
17-03-01 08:05:57.431 -08 000000153 INF: ===================Camera #2 Frame #232===================
17-03-01 08:05:57.484 -08 000000020 INF: Y Motor: Unshifted Position: 1835097
17-03-01 08:05:57.534 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.571 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 236, frameCount = 237.
17-03-01 08:05:57.571 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 237
17-03-01 08:05:57.571 -08 000000094 INF: ===================Camera #0 Frame #237===================
17-03-01 08:05:57.605 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 237, frameCount = 238.
17-03-01 08:05:57.605 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 238
17-03-01 08:05:57.605 -08 000000153 INF: ===================Camera #2 Frame #238===================
17-03-01 08:05:57.657 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.741 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 242, frameCount = 243.
17-03-01 08:05:57.741 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 243
17-03-01 08:05:57.741 -08 000000094 INF: ===================Camera #0 Frame #243===================
17-03-01 08:05:57.774 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 243, frameCount = 244.
17-03-01 08:05:57.774 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 244
17-03-01 08:05:57.774 -08 000000153 INF: ===================Camera #2 Frame #244===================
17-03-01 08:05:57.796 -08 000000020 INF: Y Motor: Unshifted Position: 1632730
17-03-01 08:05:57.846 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.855 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°===================
17-03-01 08:05:57.855 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°===================
17-03-01 08:05:57.856 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°===================
17-03-01 08:05:57.856 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Flowcell Temp 60°===================
17-03-01 08:05:57.857 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:57.857 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:57.858 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:57.858 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:57.911 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 248, frameCount = 249.
17-03-01 08:05:57.911 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 249
17-03-01 08:05:57.911 -08 000000094 INF: ===================Camera #0 Frame #249===================
17-03-01 08:05:57.919 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:57.919 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Selecting Reagent HIM (1)===================
17-03-01 08:05:57.919 -08 000000018 INF: Valve A1: Go to position 1
17-03-01 08:05:57.919 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:05:57.945 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 250, frameCount = 251.
17-03-01 08:05:57.945 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 251
17-03-01 08:05:57.945 -08 000000153 INF: ===================Camera #2 Frame #251===================
17-03-01 08:05:57.970 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:57.981 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 6\r
17-03-01 08:05:57.981 -08 000000018 INF: Valve A1: 18.423 seconds since last move, > 10.000 seconds required between moves
17-03-01 08:05:57.981 -08 000000018 INF: Valve A1: Taking longest path 'CC' from 6 to 1 to avoid 7
17-03-01 08:05:57.981 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CC1\r
17-03-01 08:05:57.981 -08 000000018 INF: SerialPort A1 (VICIA1): Recv  (discarded)
17-03-01 08:05:57.981 -08 000000018 INF: SerialPort A1 (VICIA1): Xmit CP\r
17-03-01 08:05:58.081 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 255, frameCount = 256.
17-03-01 08:05:58.081 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 256
17-03-01 08:05:58.081 -08 000000094 INF: ===================Camera #0 Frame #256===================
17-03-01 08:05:58.106 -08 000000020 INF: Y Motor: Unshifted Position: 1430355
17-03-01 08:05:58.119 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 256, frameCount = 257.
17-03-01 08:05:58.119 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 257
17-03-01 08:05:58.119 -08 000000153 INF: ===================Camera #2 Frame #257===================
17-03-01 08:05:58.156 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:58.254 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 261, frameCount = 262.
17-03-01 08:05:58.254 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 262
17-03-01 08:05:58.254 -08 000000094 INF: ===================Camera #0 Frame #262===================
17-03-01 08:05:58.284 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:58.290 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 262, frameCount = 263.
17-03-01 08:05:58.290 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 263
17-03-01 08:05:58.290 -08 000000153 INF: ===================Camera #2 Frame #263===================
17-03-01 08:05:58.420 -08 000000020 INF: Y Motor: Unshifted Position: 1228204
17-03-01 08:05:58.424 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 267, frameCount = 268.
17-03-01 08:05:58.424 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 268
17-03-01 08:05:58.424 -08 000000094 INF: ===================Camera #0 Frame #268===================
17-03-01 08:05:58.461 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 269, frameCount = 270.
17-03-01 08:05:58.461 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 270
17-03-01 08:05:58.461 -08 000000153 INF: ===================Camera #2 Frame #270===================
17-03-01 08:05:58.470 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:58.542 -08 000000137 INF: FPGA: Recv TDIYWAIT
17-03-01 08:05:58.542 -08 000000154 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:58.544 -08 000000154 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:05:58.545 -08 000000144 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:05:58.545 -08 000000009 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:05:58.545 -08 000000144 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:05:58.545 -08 000000144 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:05:58.545 -08 000000144 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:05:58.545 -08 000000009 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:05:58.545 -08 000000144 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:05:58.545 -08 000000009 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:05:58.545 -08 000000009 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:05:58.546 -08 000000009 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:05:58.594 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:58.594 -08 000000094 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:58.594 -08 000000094 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:58.594 -08 000000094 INF: ===================Camera #0 Frame #272===================
17-03-01 08:05:58.604 -08 000000018 INF: SerialPort A1 (VICIA1): Recv Position is  = 1\r
17-03-01 08:05:58.604 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:58.604 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Opening shutoff valve===================
17-03-01 08:05:58.607 -08 000000094 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:58.608 -08 000000094 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:58.732 -08 000000020 INF: Y Motor: Unshifted Position: 1025407
17-03-01 08:05:58.738 -08 000000094 INF: Camera #0 ReleaseBuffer
17-03-01 08:05:58.738 -08 000000153 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:05:58.738 -08 000000153 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:05:58.738 -08 000000153 INF: ===================Camera #2 Frame #272===================
17-03-01 08:05:58.738 -08 000000094 INF: ===================Camera TDI===================
17-03-01 08:05:58.744 -08 000000153 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:05:58.745 -08 000000153 INF: ===================CameraTDI Cleanup===================
17-03-01 08:05:58.767 -08 000000094 INF: ======================================
17-03-01 08:05:58.782 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:05:58.915 -08 000000153 INF: Camera #2 ReleaseBuffer
17-03-01 08:05:58.915 -08 000000153 INF: ===================Camera TDI===================
17-03-01 08:05:58.916 -08 000000139 INF: FPGA: Recv EX1MV
17-03-01 08:05:58.916 -08 000000139 INF: FPGA: Recv EX2MV
17-03-01 08:05:58.916 -08 000000144 INF: Excitation Filter 1: Moved 107 steps in 371.1288 ms
17-03-01 08:05:58.916 -08 000000009 INF: Excitation Filter 2: Moved 107 steps in 370.9478 ms
17-03-01 08:05:58.916 -08 000000009 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 371.1862 ms
17-03-01 08:05:58.916 -08 000000009 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 371.26 ms
17-03-01 08:05:58.916 -08 000000144 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 371.2265 ms
17-03-01 08:05:58.916 -08 000000144 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 371.6112 ms
17-03-01 08:05:58.916 -08 000000009 INF: ======================================
17-03-01 08:05:58.917 -08 000000144 INF: ======================================
17-03-01 08:05:58.918 -08 000000020 INF: Y Motor: Unshifted Position: 992234
17-03-01 08:05:58.918 -08 000000020 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:05:58.918 -08 000000020 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:58.918 -08 000000154 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:05:58.919 -08 000000154 INF: ======================================
17-03-01 08:05:58.947 -08 000000153 INF: ======================================
17-03-01 08:05:58.948 -08 000000104 INF: ===================Camera TDI===================
17-03-01 08:05:58.949 -08 000000104 INF: ======================================
17-03-01 08:05:58.980 -08 000000020 INF: Y Motor: Recv v 0\r
17-03-01 08:05:58.980 -08 000000020 INF: Y Motor: Moved to 14.9223 after 7861 ms
17-03-01 08:05:58.980 -08 000000020 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:05:59.042 -08 000000020 INF: Y Motor: Recv v 4097\r
17-03-01 08:05:59.042 -08 000000020 INF: Y Motor: Status After move finished OK:
17-03-01 08:05:59.042 -08 000000020 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:05:59.104 -08 000000020 INF: Y Motor: Recv v 0\r
17-03-01 08:05:59.104 -08 000000020 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:05:59.104 -08 000000020 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:05:59.170 -08 000000020 INF: Y Motor: Recv v 134217728\r
17-03-01 08:05:59.170 -08 000000020 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:05:59.170 -08 000000020 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:05:59.170 -08 000000020 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:05:59.229 -08 000000020 INF: Y Motor: Recv v 0\r
17-03-01 08:05:59.229 -08 000000020 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:05:59.229 -08 000000020 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:05:59.229 -08 000000020 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:05:59.287 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:05:59.287 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:05:59.287 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:59.291 -08 000000020 INF: Y Motor: Recv ok\r
17-03-01 08:05:59.291 -08 000000020 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:05:59.291 -08 000000020 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:05:59.355 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:05:59.356 -08 000000020 INF: Y Motor: Recv ok\r
17-03-01 08:05:59.356 -08 000000020 INF: ======================================
17-03-01 08:05:59.357 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:59.358 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:05:59.359 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.359 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:05:59.363 -08 000000018 INF: KloehnPump A (KLOEHNA): Pumping from 1, aspirate port PortB, aspiration rate 250, dispense rate 2500, volume 50, calling command "Pumping to Flowcell #1 pump index #0", State=Running, Depth=2, Children=0, Thread="Run", Parent="Incorporation", Type=SameThreadBlocking, solution delay 5000
17-03-01 08:05:59.418 -08 000000036 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:05:59.419 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:05:59.455 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:05:59.478 -08 000000095 INF: FPGA: Recv TDIYERD 1492236
17-03-01 08:05:59.478 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:05:59.479 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`0 (0x03)\r\n(0xFF)
17-03-01 08:05:59.479 -08 000000018 INF: Current Position of Pump is: 0
17-03-01 08:05:59.540 -08 000000140 INF: FPGA: Recv ZADCR 35572
17-03-01 08:05:59.540 -08 000000042 INF: At scan end Y pos = 14.922 and Z pos = -0.136. Y moved -48.539 mm
17-03-01 08:05:59.540 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:05:59.579 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1OR\r
17-03-01 08:05:59.602 -08 000000145 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:05:59.602 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:05:59.602 -08 000000042 INF: TDIScan finished after 12826.9845 ms
17-03-01 08:05:59.602 -08 000000042 INF: Image[0]: Y should trigger at 63.461 mm, 2nd row was at 64.370 mm (error = 0.909 mm)
17-03-01 08:05:59.602 -08 000000042 INF: Image[2]: Y should trigger at 63.461 mm, 2nd row was at 64.370 mm (error = 0.909 mm)
17-03-01 08:05:59.604 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.640 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.582 um
17-03-01 08:05:59.640 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.641 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:05:59.664 -08 000000144 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:05:59.665 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:59.665 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.665 -08 000000092 INF: ===================Dither Clean Up Command===================
17-03-01 08:05:59.665 -08 000000150 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:05:59.665 -08 000000137 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:05:59.666 -08 000000089 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:05:59.666 -08 000000137 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:05:59.666 -08 000000150 INF: ======================================
17-03-01 08:05:59.666 -08 000000137 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:05:59.666 -08 000000089 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:05:59.666 -08 000000089 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:05:59.666 -08 000000129 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:59.666 -08 000000065 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:59.667 -08 000000129 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:05:59.669 -08 000000065 INF: ===================LFT:Extracting coords===================
17-03-01 08:05:59.694 -08 000000065 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:59.695 -08 000000065 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:05:59.696 -08 000000095 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.696 -08 000000124 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.696 -08 000000031 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.696 -08 000000106 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.696 -08 000000095 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:59.696 -08 000000124 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:59.696 -08 000000106 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:59.697 -08 000000031 INF: ===================Lookup Focus Tracking===================
17-03-01 08:05:59.726 -08 000000040 INF: FPGA: Recv ZSTEP 
17-03-01 08:05:59.726 -08 000000040 INF: FPGA: Recv ZSEL 
17-03-01 08:05:59.726 -08 000000129 INF: FPGA: Xmit ZDACW 40407\n
17-03-01 08:05:59.727 -08 000000089 INF: ======================================
17-03-01 08:05:59.730 -08 000000137 INF: Y Motor: Recv ok\r
17-03-01 08:05:59.730 -08 000000137 INF: ======================================
17-03-01 08:05:59.765 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:05:59.770 -08 000000095 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:59.771 -08 000000124 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:59.771 -08 000000106 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:59.771 -08 000000031 INF: FC:B, C:52,L:4, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:05:59.792 -08 000000108 INF: FPGA: Recv ZDACW 
17-03-01 08:05:59.793 -08 000000129 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:05:59.793 -08 000000129 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:05:59.851 -08 000000136 INF: FPGA: Recv TDIBB
17-03-01 08:05:59.851 -08 000000129 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:05:59.852 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:05:59.852 -08 000000129 INF: ======================================
17-03-01 08:05:59.922 -08 000000095 INF: LFT found best fwhm score 2.000013 in 152 ms
17-03-01 08:05:59.922 -08 000000095 INF: LFT found good score at index 2557 with fwhm value 2.000013. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:59.922 -08 000000124 INF: LFT found best fwhm score 2.000407 in 151 ms
17-03-01 08:05:59.922 -08 000000124 INF: LFT found good score at index 7629 with fwhm value 2.000407. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:59.922 -08 000000095 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.922 -08 000000031 INF: LFT found best fwhm score 2.000179 in 151 ms
17-03-01 08:05:59.922 -08 000000031 INF: LFT found good score at index 5001 with fwhm value 2.000179. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:59.922 -08 000000124 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.922 -08 000000106 INF: LFT found best fwhm score 2.226397 in 151 ms
17-03-01 08:05:59.922 -08 000000106 INF: LFT found good score at index 4325 with fwhm value 2.226397. Next cycle, cycle 53 starting Z position for top surface is at -0.157 mm FC:B, C:52,L:4,T
17-03-01 08:05:59.922 -08 000000031 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.923 -08 000000095 INF: ======================================
17-03-01 08:05:59.923 -08 000000124 INF: ======================================
17-03-01 08:05:59.923 -08 000000106 INF: ===================LookupFocusTracking===================
17-03-01 08:05:59.923 -08 000000031 INF: ======================================
17-03-01 08:05:59.923 -08 000000106 INF: ======================================
17-03-01 08:05:59.924 -08 000000065 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:05:59.925 -08 000000065 INF: LFT weighted average best Z for top surface is at -0.157mm FC:B, C:52,L:4,T
17-03-01 08:05:59.925 -08 000000065 INF: ======================================
17-03-01 08:05:59.926 -08 000000092 INF: ======================================
17-03-01 08:05:59.927 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.928 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:05:59.928 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.928 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:05:59.928 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.929 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:05:59.929 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.929 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:05:59.929 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:05:59.929 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308===================
17-03-01 08:05:59.930 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308===================
17-03-01 08:05:59.930 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Waiting for image analysis===================
17-03-01 08:05:59.931 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:05:59.931 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:05:59.931 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4, Swath 2 - X = 78.03464 Y = 39.76308===================
17-03-01 08:05:59.954 -08 000000042 INF: Waited 24 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 1, buffer wait time 0
17-03-01 08:05:59.954 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:59.954 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:05:59.954 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:59.955 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:05:59.955 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 4===================
17-03-01 08:05:59.956 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface===================
17-03-01 08:05:59.972 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.026 -08 000000105 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1202 Request: {"Cycle":52,"Lane":4,"Tile":1202,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF227","HCSMMF205","HCSMMF238","HCSMMF274"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.138 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:00.155 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.156 -08 000000042 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:06:00.156 -08 000000042 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:06:00.177 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1201 Request: {"Cycle":52,"Lane":4,"Tile":1201,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF177","HCSMMF243","HCSMMF182","HCSMMF260"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.179 -08 000000032 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1206 Request: {"Cycle":52,"Lane":4,"Tile":1206,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF195","HCSMMF224","HCSMMF275","HCSMMF203"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.181 -08 000000153 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1210 Request: {"Cycle":52,"Lane":4,"Tile":1210,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF212","HCSMMF197","HCSMMF249","HCSMMF210"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.182 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:06:00.186 -08 000000122 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1213 Request: {"Cycle":52,"Lane":4,"Tile":1213,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF266","HCSMMF240","HCSMMF191","HCSMMF201"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.186 -08 000000112 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1208 Request: {"Cycle":52,"Lane":4,"Tile":1208,"Channels":["T","C","G","A"],"MemoryMappedFileNames":["HCSMMF222","HCSMMF232","HCSMMF285","HCSMMF253"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.187 -08 000000144 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1211 Request: {"Cycle":52,"Lane":4,"Tile":1211,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF270","HCSMMF241","HCSMMF187","HCSMMF284"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.188 -08 000000140 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1216 Request: {"Cycle":52,"Lane":4,"Tile":1216,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF185","HCSMMF283","HCSMMF213"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.189 -08 000000104 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1214 Request: {"Cycle":52,"Lane":4,"Tile":1214,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF236","HCSMMF179","HCSMMF184","HCSMMF231"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.190 -08 000000009 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1204 Request: {"Cycle":52,"Lane":4,"Tile":1204,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF209","HCSMMF282","HCSMMF239","HCSMMF271"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.191 -08 000000116 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1203 Request: {"Cycle":52,"Lane":4,"Tile":1203,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF247","HCSMMF234","HCSMMF207","HCSMMF206"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.192 -08 000000092 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1223 Request: {"Cycle":52,"Lane":4,"Tile":1223,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF230","HCSMMF218","HCSMMF250","HCSMMF237"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.192 -08 000000135 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1227 Request: {"Cycle":52,"Lane":4,"Tile":1227,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF254","HCSMMF287","HCSMMF281","HCSMMF259"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.193 -08 000000065 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1209 Request: {"Cycle":52,"Lane":4,"Tile":1209,"Channels":["T","G","A","C"],"MemoryMappedFileNames":["HCSMMF220","HCSMMF221","HCSMMF257","HCSMMF193"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.194 -08 000000145 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1218 Request: {"Cycle":52,"Lane":4,"Tile":1218,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF211","HCSMMF272","HCSMMF267","HCSMMF245"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.195 -08 000000040 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1224 Request: {"Cycle":52,"Lane":4,"Tile":1224,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF277","HCSMMF186","HCSMMF228","HCSMMF214"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.196 -08 000000121 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1212 Request: {"Cycle":52,"Lane":4,"Tile":1212,"Channels":["C","G","A","T"],"MemoryMappedFileNames":["HCSMMF225","HCSMMF190","HCSMMF258","HCSMMF256"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.197 -08 000000150 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1205 Request: {"Cycle":52,"Lane":4,"Tile":1205,"Channels":["C","T","A","G"],"MemoryMappedFileNames":["HCSMMF226","HCSMMF196","HCSMMF217","HCSMMF215"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.198 -08 000000023 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1207 Request: {"Cycle":52,"Lane":4,"Tile":1207,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF269","HCSMMF198","HCSMMF248","HCSMMF276"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.199 -08 000000080 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1219 Request: {"Cycle":52,"Lane":4,"Tile":1219,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF255","HCSMMF251","HCSMMF252","HCSMMF200"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.201 -08 000000109 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1215 Request: {"Cycle":52,"Lane":4,"Tile":1215,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF192","HCSMMF189","HCSMMF280","HCSMMF178"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.202 -08 000000097 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1217 Request: {"Cycle":52,"Lane":4,"Tile":1217,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF279","HCSMMF263","HCSMMF244","HCSMMF188"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.202 -08 000000087 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1226 Request: {"Cycle":52,"Lane":4,"Tile":1226,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF261","HCSMMF183","HCSMMF242","HCSMMF181"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.203 -08 000000004 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1222 Request: {"Cycle":52,"Lane":4,"Tile":1222,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF246","HCSMMF223","HCSMMF208","HCSMMF216"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.204 -08 000000059 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1221 Request: {"Cycle":52,"Lane":4,"Tile":1221,"Channels":["A","T","G","C"],"MemoryMappedFileNames":["HCSMMF229","HCSMMF204","HCSMMF219","HCSMMF233"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.205 -08 000000128 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1220 Request: {"Cycle":52,"Lane":4,"Tile":1220,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF278","HCSMMF202","HCSMMF262","HCSMMF235"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.206 -08 000000138 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1225 Request: {"Cycle":52,"Lane":4,"Tile":1225,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF268","HCSMMF265","HCSMMF199","HCSMMF194"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.208 -08 000000044 INF: Notifying RTA to Process Multi MMF for Lane: 4 Cycle: 52 Tile: 1228 Request: {"Cycle":52,"Lane":4,"Tile":1228,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF273","HCSMMF180","HCSMMF286","HCSMMF176"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:00.217 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:00.224 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:06:00.245 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:06:00.245 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.245 -08 000000042 INF: TopSurfaceZPositions[] was -0.158326114866069, so used the TopSurfaceZPositions[] (-0.158326114866069) + compensator value (0.0227).
17-03-01 08:06:00.248 -08 000000042 INF: LFT enabled: Best z-height for LaneTopSurface and Illumina.Instrument.Logic.Sentrix.II.SentrixSection was found to be -0.135626114866069
17-03-01 08:06:00.248 -08 000000042 INF: Lane 5, LaneTopSurface Surface was not flagged for detilt operations prior to ETF. Moving to default tilt positions: m1=5.000498, m2=5.391912, m3=5.33908
17-03-01 08:06:00.249 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.249 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.250 -08 000000063 INF: ===================Move Tilt Motor 1===================
17-03-01 08:06:00.250 -08 000000040 INF: ===================Move Tilt Motor 2===================
17-03-01 08:06:00.250 -08 000000108 INF: ===================Move Tilt Motor 3===================
17-03-01 08:06:00.251 -08 000000040 INF: ======================================
17-03-01 08:06:00.251 -08 000000108 INF: ======================================
17-03-01 08:06:00.251 -08 000000063 INF: ======================================
17-03-01 08:06:00.252 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.253 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.254 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.255 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.255 -08 000000042 INF: Compensator: Remaining IntoPath
17-03-01 08:06:00.255 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.256 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:00.333 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V10000A0R\r
17-03-01 08:06:00.336 -08 000000042 INF: Swath 1 position calculated to be: {X=79.69164, Y=39.76308} from estimated center X= 80.20699, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:06:00.336 -08 000000042 INF: Swath 2 position calculated to be: {X=80.79964, Y=39.76308} from estimated center X= 80.20699, Y= 39.77999 on surface LaneTopSurface
17-03-01 08:06:00.342 -08 000000042 INF: Swath 0: Converted transform from (-50.94434, 48.16345) pixels to (-0.017595, 0.01656) mm.
17-03-01 08:06:00.348 -08 000000042 INF: Swath 1: Converted transform from (-74.83981, 45.25789) pixels to (-0.025875, 0.015525) mm.
17-03-01 08:06:00.348 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308===================
17-03-01 08:06:00.349 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308===================
17-03-01 08:06:00.349 -08 000000042 INF: Transformed XStagePosition from 79.69164 mm to 79.6740401312709 mm.
17-03-01 08:06:00.361 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5696493549049 mm.
17-03-01 08:06:00.361 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3696493549049 mm.
17-03-01 08:06:00.361 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4603993549049 mm.
17-03-01 08:06:00.363 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:00.363 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:06:00.364 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:00.364 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -154.1 um, section = E_1
17-03-01 08:06:00.366 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:06:00.366 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:06:00.367 -08 000000119 INF: ===================MoveEmissionFilters===================
17-03-01 08:06:00.367 -08 000000140 INF: ===================Move X,Y===================
17-03-01 08:06:00.367 -08 000000036 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:06:00.368 -08 000000020 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:06:00.368 -08 000000094 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:06:00.368 -08 000000036 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:06:00.368 -08 000000031 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:06:00.368 -08 000000140 INF: ===================Move X,Y, Parallel===================
17-03-01 08:06:00.368 -08 000000036 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:06:00.368 -08 000000009 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:06:00.368 -08 000000036 INF: Z Motor: Moving to -0.1556 mm, started at -0.1541 mm
17-03-01 08:06:00.369 -08 000000036 INF: FPGA: Xmit ZTRG 0\n
17-03-01 08:06:00.369 -08 000000020 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:06:00.369 -08 000000031 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:06:00.369 -08 000000009 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:06:00.369 -08 000000145 INF: ===================Move X Motor without settling===================
17-03-01 08:06:00.369 -08 000000117 INF: ===================Move Y Motor without settling===================
17-03-01 08:06:00.370 -08 000000145 INF: X Motor: Xmit PR VM\n
17-03-01 08:06:00.370 -08 000000117 INF: Y Motor: Moving to 64.5696 mm @25.000 mm/sec, started at 14.9223 mm
17-03-01 08:06:00.370 -08 000000124 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:06:00.370 -08 000000135 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:06:00.370 -08 000000117 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:06:00.370 -08 000000117 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:00.370 -08 000000122 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:06:00.370 -08 000000135 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:06:00.370 -08 000000136 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:06:00.370 -08 000000112 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:06:00.370 -08 000000154 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:06:00.370 -08 000000122 INF: ======================================
17-03-01 08:06:00.371 -08 000000112 INF: ======================================
17-03-01 08:06:00.371 -08 000000154 INF: ======================================
17-03-01 08:06:00.371 -08 000000124 INF: ======================================
17-03-01 08:06:00.371 -08 000000136 INF: ======================================
17-03-01 08:06:00.372 -08 000000094 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:06:00.372 -08 000000031 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:06:00.372 -08 000000154 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:06:00.373 -08 000000082 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:06:00.373 -08 000000009 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:06:00.373 -08 000000154 INF: ======================================
17-03-01 08:06:00.373 -08 000000031 INF: ======================================
17-03-01 08:06:00.373 -08 000000082 INF: ======================================
17-03-01 08:06:00.374 -08 000000009 INF: ======================================
17-03-01 08:06:00.374 -08 000000094 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:06:00.375 -08 000000094 INF: ======================================
17-03-01 08:06:00.376 -08 000000135 INF: ======================================
17-03-01 08:06:00.377 -08 000000020 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:06:00.378 -08 000000020 INF: ======================================
17-03-01 08:06:00.379 -08 000000119 INF: ======================================
17-03-01 08:06:00.384 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:00.387 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:00.387 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:06:00.425 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:00.431 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:06:00.445 -08 000000144 INF: FPGA: Recv ZTRG 
17-03-01 08:06:00.445 -08 000000036 INF: FPGA: Xmit ZYT 0 3\n
17-03-01 08:06:00.447 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:06:00.447 -08 000000117 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:06:00.447 -08 000000117 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:00.462 -08 000000145 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:06:00.462 -08 000000145 INF: X Motor: Xmit PR VI\n
17-03-01 08:06:00.484 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:00.506 -08 000000128 INF: FPGA: Recv ZYT 
17-03-01 08:06:00.506 -08 000000036 INF: Z Motor: ZMV will trigger camera immediately and ramp is HW controlled
17-03-01 08:06:00.506 -08 000000036 INF: FPGA: Xmit ZMV 40796\n
17-03-01 08:06:00.508 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:06:00.508 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:06:00.508 -08 000000117 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:00.508 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Aspirating port PortB===================
17-03-01 08:06:00.519 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:00.525 -08 000000145 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:06:00.525 -08 000000145 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:06:00.525 -08 000000145 INF: X Motor: Moving to 79.6740 mm @15.000 mm/sec, started at 78.0088 mm
17-03-01 08:06:00.525 -08 000000145 INF: X Motor: Xmit MA 8468\n
17-03-01 08:06:00.525 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:06:00.570 -08 000000020 INF: FPGA: Recv @LOG Trigger Camera
17-03-01 08:06:00.570 -08 000000020 INF: FPGA: Recv ZMV 
17-03-01 08:06:00.570 -08 000000006 INF: FPGA: Trigger Camera
17-03-01 08:06:00.570 -08 000000036 INF: Z Motor: MoveAndTrigger 'ZMV' command took 64.0276 ms
17-03-01 08:06:00.570 -08 000000036 INF: FPGA: Xmit ZDACR\n
17-03-01 08:06:00.572 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:06:00.572 -08 000000117 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:00.572 -08 000000117 INF: Y Motor: Set target position to 5956965 encoder counts
17-03-01 08:06:00.572 -08 000000117 INF: Y Motor: Xmit s r0xca 5956965\r
17-03-01 08:06:00.587 -08 000000145 INF: X Motor: Recv MA 8468\r\n>
17-03-01 08:06:00.587 -08 000000145 INF: X Motor: WaitUntilStopped 60111
17-03-01 08:06:00.608 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V800IP9600R\r
17-03-01 08:06:00.613 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:00.619 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:06:00.631 -08 000000044 INF: FPGA: Recv ZDACR 40796
17-03-01 08:06:00.631 -08 000000036 INF: Z Motor: MoveAndTrigger took 262.6632 ms w/comms
17-03-01 08:06:00.631 -08 000000036 INF: Z Motor: After move to -0.1556, error = 0.0000, min/max error = 0.0000/0.0000, tolerance = 0.0010 mm, Keep Motor On = False. Keep Brake Off = False
17-03-01 08:06:00.631 -08 000000036 INF: Z Motor: MoveAbsStepped took 262.84 ms
17-03-01 08:06:00.632 -08 000000036 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:06:00.633 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:06:00.633 -08 000000117 INF: Y Motor: Start the move command
17-03-01 08:06:00.633 -08 000000117 INF: Y Motor: Xmit t 1\r
17-03-01 08:06:00.633 -08 000000036 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:06:00.634 -08 000000032 INF: ===================Camera Arm TDI===================
17-03-01 08:06:00.634 -08 000000060 INF: ===================TDI Scan Setup===================
17-03-01 08:06:00.635 -08 000000032 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:06:00.635 -08 000000060 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:00.636 -08 000000032 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:06:00.636 -08 000000060 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:06:00.636 -08 000000060 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:06:00.636 -08 000000060 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:06:00.693 -08 000000082 INF: FPGA: Recv ZSEL 
17-03-01 08:06:00.694 -08 000000060 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:06:00.694 -08 000000060 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:06:00.695 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:06:00.695 -08 000000117 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:06:00.695 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:00.696 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:00.713 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:00.758 -08 000000107 INF: FPGA: Recv TDIBB
17-03-01 08:06:00.759 -08 000000060 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:06:00.760 -08 000000060 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:06:00.761 -08 000000060 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:00.762 -08 000000060 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:06:00.762 -08 000000060 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:06:00.762 -08 000000060 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:06:00.796 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:00.822 -08 000000117 INF: Y Motor: Unshifted Position: 1075052
17-03-01 08:06:00.822 -08 000000009 INF: FPGA: Recv ZSTEP 
17-03-01 08:06:00.823 -08 000000060 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:00.825 -08 000000060 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:06:00.825 -08 000000060 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:00.827 -08 000000060 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:06:00.827 -08 000000060 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:06:00.827 -08 000000060 INF: Z Motor: Arming to move to -0.1156 mm
17-03-01 08:06:00.827 -08 000000060 INF: FPGA: Xmit ZYT 6436965 4\n
17-03-01 08:06:00.872 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:00.882 -08 000000105 INF: FPGA: Recv ZYT 
17-03-01 08:06:00.882 -08 000000060 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1575052 enc / 15.751 mm / ) = 6436965 enc / 64.370 mm
17-03-01 08:06:00.882 -08 000000060 INF: FPGA: Xmit ZARM 30310\n
17-03-01 08:06:00.883 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:00.943 -08 000000108 INF: FPGA: Recv ZARM
17-03-01 08:06:00.943 -08 000000060 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 61.0125 ms
17-03-01 08:06:00.943 -08 000000060 INF: Z Motor: ArmAbsStepped took 115.9857 ms
17-03-01 08:06:00.943 -08 000000060 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:00.945 -08 000000060 INF: ===================TDI Scan Setup===================
17-03-01 08:06:00.946 -08 000000060 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:06:00.947 -08 000000060 INF: ===================TDI Scan Setup===================
17-03-01 08:06:00.948 -08 000000060 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:06:00.949 -08 000000060 INF: ===================TDI Scan Setup===================
17-03-01 08:06:00.950 -08 000000060 INF: ======================================
17-03-01 08:06:00.995 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:00.999 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:06:01.132 -08 000000117 INF: Y Motor: Unshifted Position: 1783886
17-03-01 08:06:01.133 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:01.182 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:01.196 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:01.210 -08 000000145 INF: X Motor: Xmit PR ER\n
17-03-01 08:06:01.260 -08 000000032 INF: Camera #0 AttachBuffer (imageDataPtr = 56923197488 imgPtr = 56923197488 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:06:01.260 -08 000000032 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:06:01.260 -08 000000032 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:06:01.275 -08 000000145 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:06:01.275 -08 000000145 INF: X Motor: Moved to 79.6738 after 688 ms
17-03-01 08:06:01.275 -08 000000145 INF: ======================================
17-03-01 08:06:01.275 -08 000000032 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:06:01.277 -08 000000032 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:06:01.309 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:01.444 -08 000000117 INF: Y Motor: Unshifted Position: 2567279
17-03-01 08:06:01.446 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:01.494 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:01.507 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:01.619 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:01.757 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:01.758 -08 000000117 INF: Y Motor: Unshifted Position: 3343029
17-03-01 08:06:01.808 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:01.819 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:01.898 -08 000000032 INF: Camera #2 AttachBuffer (imageDataPtr = 58735136816 imgPtr = 64223121456 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:06:01.898 -08 000000032 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:06:01.898 -08 000000032 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:06:01.913 -08 000000032 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:06:01.915 -08 000000032 INF: ===================Camera Arm TDI===================
17-03-01 08:06:01.916 -08 000000032 INF: ======================================
17-03-01 08:06:01.917 -08 000000036 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:06:01.918 -08 000000036 INF: ======================================
17-03-01 08:06:01.931 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:02.069 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:02.070 -08 000000117 INF: Y Motor: Unshifted Position: 4128103
17-03-01 08:06:02.120 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:02.130 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:02.245 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:02.380 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:02.383 -08 000000117 INF: Y Motor: Unshifted Position: 4905543
17-03-01 08:06:02.433 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:02.443 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:02.555 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:02.692 -08 000000117 INF: Y Motor: Unshifted Position: 5687097
17-03-01 08:06:02.693 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:02.742 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:02.756 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:02.872 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:03.005 -08 000000117 INF: Y Motor: Unshifted Position: 5956967
17-03-01 08:06:03.005 -08 000000117 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:06:03.005 -08 000000117 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:03.006 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:03.066 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:03.067 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:06:03.067 -08 000000117 INF: Y Motor: Moved to 64.5697 after 2372 ms
17-03-01 08:06:03.067 -08 000000117 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:06:03.131 -08 000000117 INF: Y Motor: Recv v 4096\r
17-03-01 08:06:03.131 -08 000000117 INF: Y Motor: Status After move finished OK:
17-03-01 08:06:03.131 -08 000000117 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:03.193 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:06:03.193 -08 000000117 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:03.193 -08 000000117 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:06:03.254 -08 000000117 INF: Y Motor: Recv v 402653184\r
17-03-01 08:06:03.254 -08 000000117 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:06:03.254 -08 000000117 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:06:03.254 -08 000000117 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:06:03.316 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:03.319 -08 000000117 INF: Y Motor: Recv v 0\r
17-03-01 08:06:03.319 -08 000000117 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:06:03.319 -08 000000117 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:06:03.319 -08 000000117 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:03.377 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:03.378 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:06:03.378 -08 000000117 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:06:03.378 -08 000000117 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:03.442 -08 000000117 INF: Y Motor: Recv ok\r
17-03-01 08:06:03.442 -08 000000117 INF: ======================================
17-03-01 08:06:03.443 -08 000000140 INF: ===================Move X,Y===================
17-03-01 08:06:03.444 -08 000000140 INF: ======================================
17-03-01 08:06:03.445 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:06:03.446 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:03.446 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:06:03.446 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:06:03.504 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:06:03.504 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:06:03.564 -08 000000129 INF: FPGA: Recv ZFREQCL
17-03-01 08:06:03.564 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:06:03.565 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:03.565 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:06:03.627 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:03.628 -08 000000044 INF: FPGA: Recv TDIYERD 6456967
17-03-01 08:06:03.628 -08 000000042 INF: Before scan, Y encoder from FPGA = 6456967 counts (64.570 mm)
17-03-01 08:06:03.628 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:06:03.629 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:06:03.630 -08 000000136 INF: ===================TDI FPGA Arm===================
17-03-01 08:06:03.630 -08 000000135 INF: ===================Set YMotor gains for scans===================
17-03-01 08:06:03.630 -08 000000135 INF: ======================================
17-03-01 08:06:03.630 -08 000000136 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:06:03.631 -08 000000136 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:06:03.631 -08 000000136 INF: FPGA: Xmit TDIYPOS 6346040\n
17-03-01 08:06:03.689 -08 000000063 INF: FPGA: Recv TDIYPOS
17-03-01 08:06:03.689 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:03.689 -08 000000136 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:06:03.691 -08 000000136 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:06:03.691 -08 000000136 INF: FPGA: Xmit TDIYARM3 139264 6436965 1 1\n
17-03-01 08:06:03.753 -08 000000112 INF: FPGA: Recv TDIYARM3
17-03-01 08:06:03.754 -08 000000136 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:06:03.755 -08 000000136 INF: ===================TDI FPGA Arm===================
17-03-01 08:06:03.756 -08 000000136 INF: ======================================
17-03-01 08:06:03.757 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:06:03.758 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:03.758 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:03.759 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:03.759 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:03.760 -08 000000023 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:06:03.760 -08 000000032 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:06:03.760 -08 000000023 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:06:03.760 -08 000000023 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:06:03.760 -08 000000023 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:06:03.760 -08 000000032 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:06:03.760 -08 000000032 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:06:03.760 -08 000000032 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:06:03.761 -08 000000023 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:06:03.763 -08 000000032 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:06:03.939 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:04.004 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:04.127 -08 000000119 INF: FPGA: Recv EX2MV
17-03-01 08:06:04.127 -08 000000119 INF: FPGA: Recv EX1MV
17-03-01 08:06:04.127 -08 000000023 INF: Excitation Filter 2: Moved -107 steps in 366.7078 ms
17-03-01 08:06:04.127 -08 000000023 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 366.8371 ms
17-03-01 08:06:04.127 -08 000000023 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 366.9155 ms
17-03-01 08:06:04.127 -08 000000032 INF: Excitation Filter 1: Moved -107 steps in 366.5744 ms
17-03-01 08:06:04.127 -08 000000032 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 366.9918 ms
17-03-01 08:06:04.130 -08 000000032 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 367.1329 ms
17-03-01 08:06:04.130 -08 000000032 INF: ======================================
17-03-01 08:06:04.130 -08 000000023 INF: ======================================
17-03-01 08:06:04.131 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:04.132 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:04.133 -08 000000044 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:06:04.133 -08 000000111 INF: ===================Camera TDI===================
17-03-01 08:06:04.133 -08 000000144 INF: ===================Move Y Motor without settling===================
17-03-01 08:06:04.134 -08 000000131 INF: ===================FPGA Z Wait===================
17-03-01 08:06:04.134 -08 000000144 INF: Y Motor: Moving to 14.9213 mm @6.500 mm/sec, started at 64.5697 mm
17-03-01 08:06:04.134 -08 000000131 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:06:04.134 -08 000000144 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:06:04.134 -08 000000144 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:04.134 -08 000000044 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:06:04.134 -08 000000111 INF: ===================Camera TDI, Parallel===================
17-03-01 08:06:04.135 -08 000000035 INF: ===================Camera TDI===================
17-03-01 08:06:04.135 -08 000000064 INF: ===================Camera TDI===================
17-03-01 08:06:04.137 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:04.137 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:04.137 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:04.138 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:04.138 -08 000000044 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:06:04.221 -08 000000144 INF: Y Motor: Recv ok\r
17-03-01 08:06:04.221 -08 000000144 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:06:04.221 -08 000000144 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:04.254 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:04.283 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:04.284 -08 000000144 INF: Y Motor: Recv ok\r
17-03-01 08:06:04.284 -08 000000144 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:04.287 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:04.287 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:04.288 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:04.288 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:04.361 -08 000000144 INF: Y Motor: Recv v 0\r
17-03-01 08:06:04.361 -08 000000144 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:04.361 -08 000000144 INF: Y Motor: Set target position to 992131 encoder counts
17-03-01 08:06:04.361 -08 000000144 INF: Y Motor: Xmit s r0xca 992131\r
17-03-01 08:06:04.424 -08 000000144 INF: Y Motor: Recv ok\r
17-03-01 08:06:04.424 -08 000000144 INF: Y Motor: Start the move command
17-03-01 08:06:04.424 -08 000000144 INF: Y Motor: Xmit t 1\r
17-03-01 08:06:04.437 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:04.437 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:04.438 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:04.438 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:04.487 -08 000000144 INF: Y Motor: Recv ok\r
17-03-01 08:06:04.487 -08 000000144 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:06:04.487 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:04.533 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:04.546 -08 000000063 INF: FPGA: Recv ZWAIT 
17-03-01 08:06:04.546 -08 000000131 INF: ======================================
17-03-01 08:06:04.587 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 2, frameCount = 3.
17-03-01 08:06:04.587 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 3
17-03-01 08:06:04.587 -08 000000035 INF: ===================Camera #0 Frame #3===================
17-03-01 08:06:04.588 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 2, frameCount = 3.
17-03-01 08:06:04.588 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 3
17-03-01 08:06:04.588 -08 000000064 INF: ===================Camera #2 Frame #3===================
17-03-01 08:06:04.594 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:04.613 -08 000000144 INF: Y Motor: Unshifted Position: 5895333
17-03-01 08:06:04.663 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:04.750 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 8, frameCount = 9.
17-03-01 08:06:04.750 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 9
17-03-01 08:06:04.750 -08 000000035 INF: ===================Camera #0 Frame #9===================
17-03-01 08:06:04.752 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 8, frameCount = 9.
17-03-01 08:06:04.752 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 9
17-03-01 08:06:04.752 -08 000000064 INF: ===================Camera #2 Frame #9===================
17-03-01 08:06:04.787 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:04.844 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:04.906 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:04.920 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 14, frameCount = 15.
17-03-01 08:06:04.920 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 15
17-03-01 08:06:04.920 -08 000000035 INF: ===================Camera #0 Frame #15===================
17-03-01 08:06:04.921 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 14, frameCount = 15.
17-03-01 08:06:04.921 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 15
17-03-01 08:06:04.921 -08 000000064 INF: ===================Camera #2 Frame #15===================
17-03-01 08:06:04.925 -08 000000144 INF: Y Motor: Unshifted Position: 5691015
17-03-01 08:06:04.975 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.096 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 21, frameCount = 22.
17-03-01 08:06:05.096 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 22
17-03-01 08:06:05.096 -08 000000035 INF: ===================Camera #0 Frame #22===================
17-03-01 08:06:05.098 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.098 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 21, frameCount = 22.
17-03-01 08:06:05.098 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 22
17-03-01 08:06:05.098 -08 000000064 INF: ===================Camera #2 Frame #22===================
17-03-01 08:06:05.156 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:05.219 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:05.235 -08 000000144 INF: Y Motor: Unshifted Position: 5488219
17-03-01 08:06:05.277 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 27, frameCount = 28.
17-03-01 08:06:05.277 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 28
17-03-01 08:06:05.277 -08 000000035 INF: ===================Camera #0 Frame #28===================
17-03-01 08:06:05.280 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 27, frameCount = 28.
17-03-01 08:06:05.280 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 28
17-03-01 08:06:05.280 -08 000000064 INF: ===================Camera #2 Frame #28===================
17-03-01 08:06:05.285 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.410 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.450 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 34, frameCount = 35.
17-03-01 08:06:05.450 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 35
17-03-01 08:06:05.450 -08 000000064 INF: ===================Camera #2 Frame #35===================
17-03-01 08:06:05.453 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 34, frameCount = 35.
17-03-01 08:06:05.454 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 35
17-03-01 08:06:05.454 -08 000000035 INF: ===================Camera #0 Frame #35===================
17-03-01 08:06:05.469 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:05.532 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:05.548 -08 000000144 INF: Y Motor: Unshifted Position: 5285198
17-03-01 08:06:05.598 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.623 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 40, frameCount = 41.
17-03-01 08:06:05.623 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 41
17-03-01 08:06:05.623 -08 000000064 INF: ===================Camera #2 Frame #41===================
17-03-01 08:06:05.625 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 40, frameCount = 41.
17-03-01 08:06:05.625 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 41
17-03-01 08:06:05.625 -08 000000035 INF: ===================Camera #0 Frame #41===================
17-03-01 08:06:05.721 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.782 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:05.792 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 46, frameCount = 47.
17-03-01 08:06:05.792 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 47
17-03-01 08:06:05.792 -08 000000064 INF: ===================Camera #2 Frame #47===================
17-03-01 08:06:05.793 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 46, frameCount = 47.
17-03-01 08:06:05.793 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 47
17-03-01 08:06:05.793 -08 000000035 INF: ===================Camera #0 Frame #47===================
17-03-01 08:06:05.843 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:05.859 -08 000000144 INF: Y Motor: Unshifted Position: 5083043
17-03-01 08:06:05.909 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:05.961 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 53, frameCount = 54.
17-03-01 08:06:05.961 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 53, frameCount = 54.
17-03-01 08:06:05.961 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 54
17-03-01 08:06:05.961 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 54
17-03-01 08:06:05.961 -08 000000035 INF: ===================Camera #0 Frame #54===================
17-03-01 08:06:05.961 -08 000000064 INF: ===================Camera #2 Frame #54===================
17-03-01 08:06:06.036 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.093 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:06.133 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 59, frameCount = 60.
17-03-01 08:06:06.133 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 60
17-03-01 08:06:06.133 -08 000000035 INF: ===================Camera #0 Frame #60===================
17-03-01 08:06:06.134 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 59, frameCount = 60.
17-03-01 08:06:06.134 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 60
17-03-01 08:06:06.134 -08 000000064 INF: ===================Camera #2 Frame #60===================
17-03-01 08:06:06.156 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:06.172 -08 000000144 INF: Y Motor: Unshifted Position: 4879377
17-03-01 08:06:06.222 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.301 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 65, frameCount = 66.
17-03-01 08:06:06.301 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 66
17-03-01 08:06:06.301 -08 000000035 INF: ===================Camera #0 Frame #66===================
17-03-01 08:06:06.303 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 65, frameCount = 66.
17-03-01 08:06:06.303 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 66
17-03-01 08:06:06.303 -08 000000064 INF: ===================Camera #2 Frame #66===================
17-03-01 08:06:06.345 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.406 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:06.467 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:06.470 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 71, frameCount = 72.
17-03-01 08:06:06.470 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 72
17-03-01 08:06:06.470 -08 000000035 INF: ===================Camera #0 Frame #72===================
17-03-01 08:06:06.473 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 71, frameCount = 72.
17-03-01 08:06:06.473 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 72
17-03-01 08:06:06.473 -08 000000064 INF: ===================Camera #2 Frame #72===================
17-03-01 08:06:06.483 -08 000000144 INF: Y Motor: Unshifted Position: 4677228
17-03-01 08:06:06.533 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.638 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 77, frameCount = 78.
17-03-01 08:06:06.638 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 78
17-03-01 08:06:06.638 -08 000000035 INF: ===================Camera #0 Frame #78===================
17-03-01 08:06:06.642 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 78, frameCount = 79.
17-03-01 08:06:06.642 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 79
17-03-01 08:06:06.642 -08 000000064 INF: ===================Camera #2 Frame #79===================
17-03-01 08:06:06.658 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.717 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:06.778 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:06.797 -08 000000144 INF: Y Motor: Unshifted Position: 4474843
17-03-01 08:06:06.807 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 84, frameCount = 85.
17-03-01 08:06:06.807 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 85
17-03-01 08:06:06.807 -08 000000035 INF: ===================Camera #0 Frame #85===================
17-03-01 08:06:06.815 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 84, frameCount = 85.
17-03-01 08:06:06.815 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 85
17-03-01 08:06:06.815 -08 000000064 INF: ===================Camera #2 Frame #85===================
17-03-01 08:06:06.847 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.970 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:06.979 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 90, frameCount = 91.
17-03-01 08:06:06.979 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 91
17-03-01 08:06:06.979 -08 000000035 INF: ===================Camera #0 Frame #91===================
17-03-01 08:06:06.984 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 90, frameCount = 91.
17-03-01 08:06:06.984 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 91
17-03-01 08:06:06.984 -08 000000064 INF: ===================Camera #2 Frame #91===================
17-03-01 08:06:07.028 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:07.092 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:07.108 -08 000000144 INF: Y Motor: Unshifted Position: 4271404
17-03-01 08:06:07.148 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 96, frameCount = 97.
17-03-01 08:06:07.148 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 97
17-03-01 08:06:07.148 -08 000000035 INF: ===================Camera #0 Frame #97===================
17-03-01 08:06:07.153 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 96, frameCount = 97.
17-03-01 08:06:07.153 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 97
17-03-01 08:06:07.153 -08 000000064 INF: ===================Camera #2 Frame #97===================
17-03-01 08:06:07.158 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:07.281 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:07.317 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 102, frameCount = 103.
17-03-01 08:06:07.317 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 103
17-03-01 08:06:07.317 -08 000000035 INF: ===================Camera #0 Frame #103===================
17-03-01 08:06:07.322 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 103, frameCount = 104.
17-03-01 08:06:07.322 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 104
17-03-01 08:06:07.322 -08 000000064 INF: ===================Camera #2 Frame #104===================
17-03-01 08:06:07.342 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:07.402 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:07.421 -08 000000144 INF: Y Motor: Unshifted Position: 4068379
17-03-01 08:06:07.471 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:07.486 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 109, frameCount = 110.
17-03-01 08:06:07.486 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 110
17-03-01 08:06:07.486 -08 000000035 INF: ===================Camera #0 Frame #110===================
17-03-01 08:06:07.495 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 109, frameCount = 110.
17-03-01 08:06:07.495 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 110
17-03-01 08:06:07.495 -08 000000064 INF: ===================Camera #2 Frame #110===================
17-03-01 08:06:07.593 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:07.652 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:07.658 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 115, frameCount = 116.
17-03-01 08:06:07.658 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 116
17-03-01 08:06:07.658 -08 000000035 INF: ===================Camera #0 Frame #116===================
17-03-01 08:06:07.664 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 115, frameCount = 116.
17-03-01 08:06:07.664 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 116
17-03-01 08:06:07.664 -08 000000064 INF: ===================Camera #2 Frame #116===================
17-03-01 08:06:07.715 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:07.732 -08 000000144 INF: Y Motor: Unshifted Position: 3865583
17-03-01 08:06:07.782 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:07.827 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 121, frameCount = 122.
17-03-01 08:06:07.827 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 122
17-03-01 08:06:07.827 -08 000000035 INF: ===================Camera #0 Frame #122===================
17-03-01 08:06:07.833 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 121, frameCount = 122.
17-03-01 08:06:07.833 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 122
17-03-01 08:06:07.833 -08 000000064 INF: ===================Camera #2 Frame #122===================
17-03-01 08:06:07.906 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:07.965 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:07.995 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 127, frameCount = 128.
17-03-01 08:06:07.995 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 128
17-03-01 08:06:07.995 -08 000000035 INF: ===================Camera #0 Frame #128===================
17-03-01 08:06:08.002 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 128, frameCount = 129.
17-03-01 08:06:08.002 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 129
17-03-01 08:06:08.002 -08 000000064 INF: ===================Camera #2 Frame #129===================
17-03-01 08:06:08.027 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:08.043 -08 000000144 INF: Y Motor: Unshifted Position: 3662562
17-03-01 08:06:08.093 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:08.164 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 134, frameCount = 135.
17-03-01 08:06:08.164 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 135
17-03-01 08:06:08.164 -08 000000035 INF: ===================Camera #0 Frame #135===================
17-03-01 08:06:08.174 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 134, frameCount = 135.
17-03-01 08:06:08.174 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 135
17-03-01 08:06:08.174 -08 000000064 INF: ===================Camera #2 Frame #135===================
17-03-01 08:06:08.219 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:08.277 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:08.336 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 140, frameCount = 141.
17-03-01 08:06:08.336 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 141
17-03-01 08:06:08.336 -08 000000035 INF: ===================Camera #0 Frame #141===================
17-03-01 08:06:08.340 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:08.343 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 140, frameCount = 141.
17-03-01 08:06:08.343 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 141
17-03-01 08:06:08.343 -08 000000064 INF: ===================Camera #2 Frame #141===================
17-03-01 08:06:08.356 -08 000000144 INF: Y Motor: Unshifted Position: 3458899
17-03-01 08:06:08.406 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:08.504 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 146, frameCount = 147.
17-03-01 08:06:08.504 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 147
17-03-01 08:06:08.504 -08 000000035 INF: ===================Camera #0 Frame #147===================
17-03-01 08:06:08.512 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 146, frameCount = 147.
17-03-01 08:06:08.512 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 147
17-03-01 08:06:08.512 -08 000000064 INF: ===================Camera #2 Frame #147===================
17-03-01 08:06:08.529 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:08.590 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:08.651 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:08.667 -08 000000144 INF: Y Motor: Unshifted Position: 3256756
17-03-01 08:06:08.673 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 152, frameCount = 153.
17-03-01 08:06:08.673 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 153
17-03-01 08:06:08.673 -08 000000035 INF: ===================Camera #0 Frame #153===================
17-03-01 08:06:08.681 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 153, frameCount = 154.
17-03-01 08:06:08.681 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 154
17-03-01 08:06:08.681 -08 000000064 INF: ===================Camera #2 Frame #154===================
17-03-01 08:06:08.717 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:08.842 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 159, frameCount = 160.
17-03-01 08:06:08.842 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 160
17-03-01 08:06:08.842 -08 000000035 INF: ===================Camera #0 Frame #160===================
17-03-01 08:06:08.843 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:08.853 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 159, frameCount = 160.
17-03-01 08:06:08.853 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 160
17-03-01 08:06:08.853 -08 000000064 INF: ===================Camera #2 Frame #160===================
17-03-01 08:06:08.901 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:08.963 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:08.979 -08 000000144 INF: Y Motor: Unshifted Position: 3053733
17-03-01 08:06:09.014 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 165, frameCount = 166.
17-03-01 08:06:09.014 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 166
17-03-01 08:06:09.014 -08 000000035 INF: ===================Camera #0 Frame #166===================
17-03-01 08:06:09.022 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 165, frameCount = 166.
17-03-01 08:06:09.022 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 166
17-03-01 08:06:09.022 -08 000000064 INF: ===================Camera #2 Frame #166===================
17-03-01 08:06:09.029 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:09.155 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:09.183 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 171, frameCount = 172.
17-03-01 08:06:09.183 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 172
17-03-01 08:06:09.183 -08 000000035 INF: ===================Camera #0 Frame #172===================
17-03-01 08:06:09.191 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 171, frameCount = 172.
17-03-01 08:06:09.191 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 172
17-03-01 08:06:09.191 -08 000000064 INF: ===================Camera #2 Frame #172===================
17-03-01 08:06:09.213 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:09.274 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:09.293 -08 000000144 INF: Y Motor: Unshifted Position: 2850295
17-03-01 08:06:09.343 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:09.352 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 177, frameCount = 178.
17-03-01 08:06:09.352 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 178
17-03-01 08:06:09.352 -08 000000035 INF: ===================Camera #0 Frame #178===================
17-03-01 08:06:09.360 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 178, frameCount = 179.
17-03-01 08:06:09.360 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 179
17-03-01 08:06:09.360 -08 000000064 INF: ===================Camera #2 Frame #179===================
17-03-01 08:06:09.466 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:09.520 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 184, frameCount = 185.
17-03-01 08:06:09.520 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 185
17-03-01 08:06:09.520 -08 000000035 INF: ===================Camera #0 Frame #185===================
17-03-01 08:06:09.524 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:09.533 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 184, frameCount = 185.
17-03-01 08:06:09.533 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 185
17-03-01 08:06:09.533 -08 000000064 INF: ===================Camera #2 Frame #185===================
17-03-01 08:06:09.587 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:09.605 -08 000000144 INF: Y Motor: Unshifted Position: 2647284
17-03-01 08:06:09.655 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:09.692 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 190, frameCount = 191.
17-03-01 08:06:09.692 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 191
17-03-01 08:06:09.692 -08 000000035 INF: ===================Camera #0 Frame #191===================
17-03-01 08:06:09.703 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 190, frameCount = 191.
17-03-01 08:06:09.703 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 191
17-03-01 08:06:09.703 -08 000000064 INF: ===================Camera #2 Frame #191===================
17-03-01 08:06:09.778 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:09.837 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:09.861 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 196, frameCount = 197.
17-03-01 08:06:09.861 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 197
17-03-01 08:06:09.861 -08 000000035 INF: ===================Camera #0 Frame #197===================
17-03-01 08:06:09.873 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 197, frameCount = 198.
17-03-01 08:06:09.873 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 198
17-03-01 08:06:09.873 -08 000000064 INF: ===================Camera #2 Frame #198===================
17-03-01 08:06:09.898 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:09.914 -08 000000144 INF: Y Motor: Unshifted Position: 2445776
17-03-01 08:06:09.964 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.030 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 202, frameCount = 203.
17-03-01 08:06:10.030 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 203
17-03-01 08:06:10.030 -08 000000035 INF: ===================Camera #0 Frame #203===================
17-03-01 08:06:10.046 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 203, frameCount = 204.
17-03-01 08:06:10.046 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 204
17-03-01 08:06:10.046 -08 000000064 INF: ===================Camera #2 Frame #204===================
17-03-01 08:06:10.090 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.148 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:10.199 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 209, frameCount = 210.
17-03-01 08:06:10.199 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 210
17-03-01 08:06:10.199 -08 000000035 INF: ===================Camera #0 Frame #210===================
17-03-01 08:06:10.212 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:10.216 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 209, frameCount = 210.
17-03-01 08:06:10.216 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 210
17-03-01 08:06:10.216 -08 000000064 INF: ===================Camera #2 Frame #210===================
17-03-01 08:06:10.228 -08 000000144 INF: Y Motor: Unshifted Position: 2241466
17-03-01 08:06:10.278 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.371 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 215, frameCount = 216.
17-03-01 08:06:10.371 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 216
17-03-01 08:06:10.371 -08 000000035 INF: ===================Camera #0 Frame #216===================
17-03-01 08:06:10.386 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 215, frameCount = 216.
17-03-01 08:06:10.386 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 216
17-03-01 08:06:10.386 -08 000000064 INF: ===================Camera #2 Frame #216===================
17-03-01 08:06:10.401 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.462 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:10.524 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:10.540 -08 000000144 INF: Y Motor: Unshifted Position: 2038667
17-03-01 08:06:10.540 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 221, frameCount = 222.
17-03-01 08:06:10.540 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 222
17-03-01 08:06:10.540 -08 000000035 INF: ===================Camera #0 Frame #222===================
17-03-01 08:06:10.556 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 222, frameCount = 223.
17-03-01 08:06:10.556 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 223
17-03-01 08:06:10.556 -08 000000064 INF: ===================Camera #2 Frame #223===================
17-03-01 08:06:10.590 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.709 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 227, frameCount = 228.
17-03-01 08:06:10.709 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 228
17-03-01 08:06:10.709 -08 000000035 INF: ===================Camera #0 Frame #228===================
17-03-01 08:06:10.713 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.730 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 228, frameCount = 229.
17-03-01 08:06:10.730 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 229
17-03-01 08:06:10.730 -08 000000064 INF: ===================Camera #2 Frame #229===================
17-03-01 08:06:10.774 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:10.834 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:10.850 -08 000000144 INF: Y Motor: Unshifted Position: 1837162
17-03-01 08:06:10.879 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 234, frameCount = 235.
17-03-01 08:06:10.879 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 235
17-03-01 08:06:10.879 -08 000000035 INF: ===================Camera #0 Frame #235===================
17-03-01 08:06:10.900 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:10.901 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 234, frameCount = 235.
17-03-01 08:06:10.901 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 235
17-03-01 08:06:10.901 -08 000000064 INF: ===================Camera #2 Frame #235===================
17-03-01 08:06:11.026 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:11.052 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 240, frameCount = 241.
17-03-01 08:06:11.052 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 241
17-03-01 08:06:11.052 -08 000000035 INF: ===================Camera #0 Frame #241===================
17-03-01 08:06:11.072 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 241, frameCount = 242.
17-03-01 08:06:11.072 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 242
17-03-01 08:06:11.072 -08 000000064 INF: ===================Camera #2 Frame #242===================
17-03-01 08:06:11.084 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:11.146 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:11.162 -08 000000144 INF: Y Motor: Unshifted Position: 1634146
17-03-01 08:06:11.212 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:11.222 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 246, frameCount = 247.
17-03-01 08:06:11.222 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 247
17-03-01 08:06:11.222 -08 000000035 INF: ===================Camera #0 Frame #247===================
17-03-01 08:06:11.246 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 247, frameCount = 248.
17-03-01 08:06:11.246 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 248
17-03-01 08:06:11.246 -08 000000064 INF: ===================Camera #2 Frame #248===================
17-03-01 08:06:11.338 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:11.391 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 252, frameCount = 253.
17-03-01 08:06:11.391 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 253
17-03-01 08:06:11.391 -08 000000035 INF: ===================Camera #0 Frame #253===================
17-03-01 08:06:11.396 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:11.417 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 253, frameCount = 254.
17-03-01 08:06:11.417 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 254
17-03-01 08:06:11.417 -08 000000064 INF: ===================Camera #2 Frame #254===================
17-03-01 08:06:11.460 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:11.476 -08 000000144 INF: Y Motor: Unshifted Position: 1429172
17-03-01 08:06:11.526 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:11.561 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 259, frameCount = 260.
17-03-01 08:06:11.561 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 260
17-03-01 08:06:11.561 -08 000000035 INF: ===================Camera #0 Frame #260===================
17-03-01 08:06:11.588 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 260, frameCount = 261.
17-03-01 08:06:11.588 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 261
17-03-01 08:06:11.588 -08 000000064 INF: ===================Camera #2 Frame #261===================
17-03-01 08:06:11.649 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:11.710 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:11.734 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 265, frameCount = 266.
17-03-01 08:06:11.734 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 266
17-03-01 08:06:11.734 -08 000000035 INF: ===================Camera #0 Frame #266===================
17-03-01 08:06:11.762 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 266, frameCount = 267.
17-03-01 08:06:11.762 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 267
17-03-01 08:06:11.762 -08 000000064 INF: ===================Camera #2 Frame #267===================
17-03-01 08:06:11.770 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:11.787 -08 000000144 INF: Y Motor: Unshifted Position: 1227664
17-03-01 08:06:11.837 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:11.904 -08 000000035 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:06:11.904 -08 000000035 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:06:11.904 -08 000000035 INF: ===================Camera #0 Frame #272===================
17-03-01 08:06:11.910 -08 000000119 INF: FPGA: Recv TDIYWAIT
17-03-01 08:06:11.910 -08 000000044 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:06:11.911 -08 000000044 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:06:11.912 -08 000000097 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:06:11.912 -08 000000060 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:06:11.912 -08 000000097 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:06:11.913 -08 000000097 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:06:11.913 -08 000000097 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:06:11.913 -08 000000060 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:06:11.913 -08 000000097 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:06:11.913 -08 000000060 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:06:11.913 -08 000000060 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:06:11.914 -08 000000060 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:06:11.924 -08 000000035 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:06:11.925 -08 000000035 INF: ===================CameraTDI Cleanup===================
17-03-01 08:06:11.939 -08 000000064 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:06:11.939 -08 000000064 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:06:11.939 -08 000000064 INF: ===================Camera #2 Frame #272===================
17-03-01 08:06:11.955 -08 000000064 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:06:11.956 -08 000000064 INF: ===================CameraTDI Cleanup===================
17-03-01 08:06:11.962 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:12.020 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:12.084 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:12.086 -08 000000035 INF: Camera #0 ReleaseBuffer
17-03-01 08:06:12.086 -08 000000035 INF: ===================Camera TDI===================
17-03-01 08:06:12.100 -08 000000144 INF: Y Motor: Unshifted Position: 1024220
17-03-01 08:06:12.117 -08 000000035 INF: ======================================
17-03-01 08:06:12.150 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:12.285 -08 000000064 INF: Camera #2 ReleaseBuffer
17-03-01 08:06:12.285 -08 000000064 INF: ===================Camera TDI===================
17-03-01 08:06:12.288 -08 000000040 INF: FPGA: Recv EX1MV
17-03-01 08:06:12.289 -08 000000040 INF: FPGA: Recv EX2MV
17-03-01 08:06:12.289 -08 000000060 INF: Excitation Filter 2: Moved 107 steps in 375.9395 ms
17-03-01 08:06:12.289 -08 000000097 INF: Excitation Filter 1: Moved 107 steps in 376.1208 ms
17-03-01 08:06:12.289 -08 000000060 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 376.0828 ms
17-03-01 08:06:12.289 -08 000000060 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 376.1961 ms
17-03-01 08:06:12.289 -08 000000097 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 376.2273 ms
17-03-01 08:06:12.289 -08 000000097 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 376.4063 ms
17-03-01 08:06:12.289 -08 000000060 INF: ======================================
17-03-01 08:06:12.289 -08 000000097 INF: ======================================
17-03-01 08:06:12.290 -08 000000144 INF: Y Motor: Unshifted Position: 992131
17-03-01 08:06:12.290 -08 000000144 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:06:12.290 -08 000000144 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:12.290 -08 000000044 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:06:12.292 -08 000000044 INF: ======================================
17-03-01 08:06:12.319 -08 000000064 INF: ======================================
17-03-01 08:06:12.321 -08 000000111 INF: ===================Camera TDI===================
17-03-01 08:06:12.322 -08 000000111 INF: ======================================
17-03-01 08:06:12.334 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:12.349 -08 000000144 INF: Y Motor: Recv v 0\r
17-03-01 08:06:12.349 -08 000000144 INF: Y Motor: Moved to 14.9213 after 7862 ms
17-03-01 08:06:12.349 -08 000000144 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:06:12.395 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:12.413 -08 000000144 INF: Y Motor: Recv v 4097\r
17-03-01 08:06:12.413 -08 000000144 INF: Y Motor: Status After move finished OK:
17-03-01 08:06:12.413 -08 000000144 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:12.473 -08 000000144 INF: Y Motor: Recv v 0\r
17-03-01 08:06:12.473 -08 000000144 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:12.473 -08 000000144 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:06:12.537 -08 000000144 INF: Y Motor: Recv v 134217728\r
17-03-01 08:06:12.537 -08 000000144 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:06:12.537 -08 000000144 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:06:12.537 -08 000000144 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:06:12.599 -08 000000144 INF: Y Motor: Recv v 0\r
17-03-01 08:06:12.599 -08 000000144 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:06:12.599 -08 000000144 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:06:12.599 -08 000000144 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:12.645 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:12.662 -08 000000144 INF: Y Motor: Recv ok\r
17-03-01 08:06:12.662 -08 000000144 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:06:12.662 -08 000000144 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:12.708 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:12.724 -08 000000144 INF: Y Motor: Recv ok\r
17-03-01 08:06:12.724 -08 000000144 INF: ======================================
17-03-01 08:06:12.725 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:12.726 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:12.727 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:12.727 -08 000000042 INF: FPGA: Xmit TDICLINES\n
17-03-01 08:06:12.784 -08 000000129 INF: FPGA: Recv TDICLINES 1023
17-03-01 08:06:12.784 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:06:12.846 -08 000000135 INF: FPGA: Recv TDIYERD 1492132
17-03-01 08:06:12.846 -08 000000042 INF: FPGA: Xmit ZADCR\n
17-03-01 08:06:12.909 -08 000000060 INF: FPGA: Recv ZADCR 35828
17-03-01 08:06:12.909 -08 000000042 INF: At scan end Y pos = 14.921 and Z pos = -0.137. Y moved -48.539 mm
17-03-01 08:06:12.909 -08 000000042 INF: FPGA: Xmit TDIPULSES\n
17-03-01 08:06:12.958 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:12.972 -08 000000151 INF: FPGA: Recv TDIPULSES 139265
17-03-01 08:06:12.972 -08 000000042 INF: The FPGA sent 139264 triggers to the camera ; expected 139264
17-03-01 08:06:12.972 -08 000000042 INF: TDIScan finished after 12623.1306 ms
17-03-01 08:06:12.972 -08 000000042 INF: Image[0]: Y should trigger at 63.460 mm, 2nd row was at 64.369 mm (error = 0.909 mm)
17-03-01 08:06:12.972 -08 000000042 INF: Image[2]: Y should trigger at 63.460 mm, 2nd row was at 64.369 mm (error = 0.909 mm)
17-03-01 08:06:12.974 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.008 -08 000000042 INF: Z jump check: There were 0/139264 lines (retry if > 900) at which Delta Z >= 10 um; span = 1000 lines. Largest delta = 0.639 um
17-03-01 08:06:13.008 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.009 -08 000000042 INF: FPGA: Xmit SWOOF_RDSTAT\n
17-03-01 08:06:13.020 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:13.034 -08 000000059 INF: FPGA: Recv SWOOF_RDSTAT 0
17-03-01 08:06:13.034 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.035 -08 000000131 INF: ===================Dither Clean Up Command===================
17-03-01 08:06:13.035 -08 000000111 INF: ===================Set YMotor gains for fast moves===================
17-03-01 08:06:13.035 -08 000000031 INF: ===================Set Y Motor Motor Velocity===================
17-03-01 08:06:13.035 -08 000000035 INF: ===================Set Z Motor Motor Velocity===================
17-03-01 08:06:13.035 -08 000000031 INF: Y Motor: Set max velocity (25000000), unit is 0.1 counts/sec
17-03-01 08:06:13.035 -08 000000031 INF: Y Motor: Xmit s r0xcb 25000000\r
17-03-01 08:06:13.035 -08 000000035 INF: Z Motor: Set Z velocity to 1.000 mm/s / 1288471 16.16 format
17-03-01 08:06:13.036 -08 000000035 INF: FPGA: Xmit ZSTEP 1288471\n
17-03-01 08:06:13.036 -08 000000111 INF: ======================================
17-03-01 08:06:13.036 -08 000000117 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:06:13.036 -08 000000063 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:06:13.037 -08 000000117 INF: FPGA: Xmit ZSEL 0\n
17-03-01 08:06:13.039 -08 000000063 INF: ===================LFT:Extracting coords===================
17-03-01 08:06:13.064 -08 000000063 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:06:13.065 -08 000000063 INF: ===================LookupFocusTrackingCleanup, LookupFocusTrackingCleanupCommand===================
17-03-01 08:06:13.066 -08 000000137 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.066 -08 000000112 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.066 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.066 -08 000000107 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.066 -08 000000137 INF: ===================Lookup Focus Tracking===================
17-03-01 08:06:13.066 -08 000000112 INF: ===================Lookup Focus Tracking===================
17-03-01 08:06:13.067 -08 000000093 INF: ===================Lookup Focus Tracking===================
17-03-01 08:06:13.067 -08 000000107 INF: ===================Lookup Focus Tracking===================
17-03-01 08:06:13.095 -08 000000121 INF: FPGA: Recv ZSTEP 
17-03-01 08:06:13.095 -08 000000121 INF: FPGA: Recv ZSEL 
17-03-01 08:06:13.095 -08 000000117 INF: FPGA: Xmit ZDACW 40796\n
17-03-01 08:06:13.095 -08 000000035 INF: ======================================
17-03-01 08:06:13.099 -08 000000031 INF: Y Motor: Recv ok\r
17-03-01 08:06:13.099 -08 000000031 INF: ======================================
17-03-01 08:06:13.140 -08 000000137 INF: FC:B, C:52,L:5, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:06:13.141 -08 000000112 INF: FC:B, C:52,L:5, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:06:13.141 -08 000000093 INF: FC:B, C:52,L:5, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:06:13.141 -08 000000107 INF: FC:B, C:52,L:5, S:T - LFT will start at 3185 lines into the image buffer and analyze 10000 lines.
17-03-01 08:06:13.159 -08 000000109 INF: FPGA: Recv ZDACW 
17-03-01 08:06:13.160 -08 000000117 INF: ===================DitherPostSwathFocusCleanup, FPGA Bypass Data blocking===================
17-03-01 08:06:13.160 -08 000000117 INF: FPGA: Xmit TDIBB 0\n
17-03-01 08:06:13.223 -08 000000009 INF: FPGA: Recv TDIBB
17-03-01 08:06:13.223 -08 000000117 INF: ===================DitherPostSwathFocusCleanup===================
17-03-01 08:06:13.224 -08 000000117 INF: ======================================
17-03-01 08:06:13.270 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:13.292 -08 000000137 INF: LFT found best fwhm score 3.402823E+38 in 151 ms
17-03-01 08:06:13.292 -08 000000137 INF: LFT failed to find passing fwhm score. Highest score found is 3.402823E+38Best Z position will remain -0.158326114866069 in the next cycle, cycle 53 FC:B, C:52,L:5,T
17-03-01 08:06:13.292 -08 000000093 INF: LFT found best fwhm score 2.142901 in 151 ms
17-03-01 08:06:13.292 -08 000000093 INF: LFT found good score at index 2617 with fwhm value 2.142901. Next cycle, cycle 53 starting Z position for top surface is at -0.158 mm FC:B, C:52,L:5,T
17-03-01 08:06:13.292 -08 000000112 INF: LFT found best fwhm score 2.000033 in 151 ms
17-03-01 08:06:13.292 -08 000000137 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.292 -08 000000107 INF: LFT found best fwhm score 2.000344 in 151 ms
17-03-01 08:06:13.292 -08 000000107 INF: LFT found good score at index 4941 with fwhm value 2.000344. Next cycle, cycle 53 starting Z position for top surface is at -0.158 mm FC:B, C:52,L:5,T
17-03-01 08:06:13.292 -08 000000093 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.292 -08 000000112 INF: LFT found good score at index 5145 with fwhm value 2.000033. Next cycle, cycle 53 starting Z position for top surface is at -0.158 mm FC:B, C:52,L:5,T
17-03-01 08:06:13.292 -08 000000107 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.293 -08 000000137 INF: ======================================
17-03-01 08:06:13.293 -08 000000093 INF: ======================================
17-03-01 08:06:13.293 -08 000000112 INF: ===================LookupFocusTracking===================
17-03-01 08:06:13.293 -08 000000107 INF: ======================================
17-03-01 08:06:13.293 -08 000000112 INF: ======================================
17-03-01 08:06:13.294 -08 000000063 INF: ===================LookupFocusTrackingCleanup===================
17-03-01 08:06:13.295 -08 000000063 INF: LFT weighted average best Z for top surface is at -0.158mm FC:B, C:52,L:5,T
17-03-01 08:06:13.295 -08 000000063 INF: ======================================
17-03-01 08:06:13.296 -08 000000131 INF: ======================================
17-03-01 08:06:13.297 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.298 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, HandleImage(A)===================
17-03-01 08:06:13.298 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, HandleImage(G)===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, HandleImage(T)===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C, HandleImage(C)===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.299 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308===================
17-03-01 08:06:13.300 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308===================
17-03-01 08:06:13.301 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Aspirating port PortB, Waiting for image analysis===================
17-03-01 08:06:13.301 -08 000000042 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Aspirating port PortB===================
17-03-01 08:06:13.301 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308, Waiting for image analysis===================
17-03-01 08:06:13.301 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 1 - X = 79.69164 Y = 39.76308===================
17-03-01 08:06:13.324 -08 000000042 INF: Waited 24 ms to submit image to image processing queue.  Lock wait time: 0, thread wait time 1, buffer wait time 0
17-03-01 08:06:13.324 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5===================
17-03-01 08:06:13.324 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:13.324 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308===================
17-03-01 08:06:13.325 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing, MemoryMappedTransfer===================
17-03-01 08:06:13.325 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308===================
17-03-01 08:06:13.325 -08 000000042 INF: Transformed XStagePosition from 80.79964 mm to 80.7737618405372 mm.
17-03-01 08:06:13.337 -08 000000042 INF: Transformed StartingYStagePosition from 64.5530893554688 mm to 64.5686143556386 mm.
17-03-01 08:06:13.337 -08 000000042 INF: Transformed StartingYStageITFPosition from 64.3530893554688 mm to 64.3686143556386 mm.
17-03-01 08:06:13.337 -08 000000042 INF: Transformed TriggerYStagePosition from 63.4438393554687 mm to 63.4593643556386 mm.
17-03-01 08:06:13.340 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.340 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Populating image tags===================
17-03-01 08:06:13.340 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:13.340 -08 000000042 INF: TDIScan start: HighRes1x1, velocity = 6.5 mm/sec, clearing lines = 66, image lines = 139264, channels = A, G, T, C, TDI Z = -155.6 um, section = E_1
17-03-01 08:06:13.342 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:06:13.343 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:06:13.345 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:13.390 -08 000000044 INF: ===================MoveEmissionFilters===================
17-03-01 08:06:13.391 -08 000000071 INF: ===================Move X,Y===================
17-03-01 08:06:13.391 -08 000000109 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:06:13.391 -08 000000071 INF: ===================Move X,Y, Parallel===================
17-03-01 08:06:13.392 -08 000000109 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, Move Z Motor===================
17-03-01 08:06:13.392 -08 000000109 INF: Z Motor: Entering MoveAbsStepped
17-03-01 08:06:13.393 -08 000000109 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:06:13.394 -08 000000109 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA, TDI Scan Setup and Camera Arm===================
17-03-01 08:06:13.395 -08 000000124 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:06:13.395 -08 000000121 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:06:13.396 -08 000000124 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:06:13.396 -08 000000121 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:06:13.396 -08 000000036 INF: ===================Move X Motor without settling===================
17-03-01 08:06:13.396 -08 000000036 INF: X Motor: Xmit PR VM\n
17-03-01 08:06:13.396 -08 000000134 INF: ===================Move Y Motor without settling===================
17-03-01 08:06:13.397 -08 000000134 INF: Y Motor: Moving to 64.5686 mm @25.000 mm/sec, started at 14.9213 mm
17-03-01 08:06:13.397 -08 000000134 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:06:13.397 -08 000000134 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:13.399 -08 000000031 INF: ===================TDI Scan Setup===================
17-03-01 08:06:13.400 -08 000000031 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:13.400 -08 000000131 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:06:13.400 -08 000000049 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1101 Request: {"Cycle":52,"Lane":5,"Tile":1101,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF265","HCSMMF176","HCSMMF273","HCSMMF180"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.401 -08 000000031 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:06:13.401 -08 000000139 INF: ===================Move Emission Filter 11(sim) to OutOfPath===================
17-03-01 08:06:13.401 -08 000000031 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:06:13.401 -08 000000031 INF: FPGA: Xmit ZSEL 3\n
17-03-01 08:06:13.401 -08 000000082 INF: ===================Camera Arm TDI===================
17-03-01 08:06:13.401 -08 000000136 INF: ===================Move Emission Filter 21(sim) to IntoPath===================
17-03-01 08:06:13.402 -08 000000131 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2', MoveEmissionFilterSet===================
17-03-01 08:06:13.402 -08 000000144 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:06:13.402 -08 000000139 INF: ======================================
17-03-01 08:06:13.402 -08 000000136 INF: ======================================
17-03-01 08:06:13.402 -08 000000082 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:06:13.402 -08 000000144 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1', MoveEmissionFilterSet===================
17-03-01 08:06:13.403 -08 000000154 INF: ===================Move Emission Filter 22(sim) to OutOfPath===================
17-03-01 08:06:13.403 -08 000000080 INF: ===================Move Emission Filter 12 to IntoPath===================
17-03-01 08:06:13.403 -08 000000082 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:06:13.403 -08 000000154 INF: ======================================
17-03-01 08:06:13.403 -08 000000080 INF: Emission Filter 12: Remaining IntoPath
17-03-01 08:06:13.404 -08 000000094 INF: ===================Move Emission Filter 31(sim) to OutOfPath===================
17-03-01 08:06:13.404 -08 000000080 INF: ======================================
17-03-01 08:06:13.404 -08 000000094 INF: ======================================
17-03-01 08:06:13.404 -08 000000059 INF: ===================Move Emission Filter 41(sim) to IntoPath===================
17-03-01 08:06:13.405 -08 000000121 INF: ===================Move EmissionFilterSet2(sim) ('G') to 'Bandpass1'===================
17-03-01 08:06:13.405 -08 000000138 INF: ===================Move Emission Filter 42(sim) to OutOfPath===================
17-03-01 08:06:13.405 -08 000000059 INF: ======================================
17-03-01 08:06:13.406 -08 000000121 INF: ======================================
17-03-01 08:06:13.406 -08 000000138 INF: ======================================
17-03-01 08:06:13.409 -08 000000144 INF: ===================Move EmissionFilterSet4(sim) ('C') to 'Bandpass1'===================
17-03-01 08:06:13.410 -08 000000144 INF: ======================================
17-03-01 08:06:13.422 -08 000000153 INF: ===================Move Emission Filter 32(sim) to IntoPath===================
17-03-01 08:06:13.422 -08 000000153 INF: ======================================
17-03-01 08:06:13.424 -08 000000131 INF: ===================Move EmissionFilterSet3(sim) ('T') to 'Bandpass2'===================
17-03-01 08:06:13.425 -08 000000131 INF: ======================================
17-03-01 08:06:13.434 -08 000000124 INF: ===================Move EmissionFilterSet1(sim) ('A') to 'Bandpass2'===================
17-03-01 08:06:13.435 -08 000000124 INF: ======================================
17-03-01 08:06:13.436 -08 000000044 INF: ======================================
17-03-01 08:06:13.489 -08 000000107 INF: FPGA: Recv ZSEL 
17-03-01 08:06:13.491 -08 000000036 INF: X Motor: Recv PR VM\r\n6144\r\n>
17-03-01 08:06:13.491 -08 000000036 INF: X Motor: Xmit PR VI\n
17-03-01 08:06:13.491 -08 000000031 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:06:13.491 -08 000000031 INF: FPGA: Xmit TDIBB 1\n
17-03-01 08:06:13.492 -08 000000134 INF: Y Motor: Recv ok\r
17-03-01 08:06:13.492 -08 000000134 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:06:13.492 -08 000000134 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:13.524 -08 000000009 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1105 Request: {"Cycle":52,"Lane":5,"Tile":1105,"Channels":["T","A","G","C"],"MemoryMappedFileNames":["HCSMMF204","HCSMMF278","HCSMMF188","HCSMMF272"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.527 -08 000000151 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1107 Request: {"Cycle":52,"Lane":5,"Tile":1107,"Channels":["C","G","T","A"],"MemoryMappedFileNames":["HCSMMF270","HCSMMF279","HCSMMF217","HCSMMF213"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.527 -08 000000046 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1110 Request: {"Cycle":52,"Lane":5,"Tile":1110,"Channels":["A","G","T","C"],"MemoryMappedFileNames":["HCSMMF263","HCSMMF277","HCSMMF241","HCSMMF220"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.533 -08 000000137 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1112 Request: {"Cycle":52,"Lane":5,"Tile":1112,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF183","HCSMMF186","HCSMMF261","HCSMMF226"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.537 -08 000000106 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1116 Request: {"Cycle":52,"Lane":5,"Tile":1116,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF240","HCSMMF271","HCSMMF191","HCSMMF251"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.538 -08 000000139 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1118 Request: {"Cycle":52,"Lane":5,"Tile":1118,"Channels":["A","C","G","T"],"MemoryMappedFileNames":["HCSMMF201","HCSMMF190","HCSMMF255","HCSMMF256"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.539 -08 000000104 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1109 Request: {"Cycle":52,"Lane":5,"Tile":1109,"Channels":["A","C","T","G"],"MemoryMappedFileNames":["HCSMMF283","HCSMMF221","HCSMMF215","HCSMMF231"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.540 -08 000000035 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1115 Request: {"Cycle":52,"Lane":5,"Tile":1115,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF280","HCSMMF242","HCSMMF179","HCSMMF236"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.540 -08 000000117 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1106 Request: {"Cycle":52,"Lane":5,"Tile":1106,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF282","HCSMMF267","HCSMMF187","HCSMMF196"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.543 -08 000000092 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1114 Request: {"Cycle":52,"Lane":5,"Tile":1114,"Channels":["T","A","C","G"],"MemoryMappedFileNames":["HCSMMF209","HCSMMF214","HCSMMF189","HCSMMF225"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.544 -08 000000105 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1103 Request: {"Cycle":52,"Lane":5,"Tile":1103,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF264","HCSMMF268","HCSMMF202","HCSMMF229"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.545 -08 000000060 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1102 Request: {"Cycle":52,"Lane":5,"Tile":1102,"Channels":["C","T","G","A"],"MemoryMappedFileNames":["HCSMMF199","HCSMMF194","HCSMMF262","HCSMMF286"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.546 -08 000000064 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1108 Request: {"Cycle":52,"Lane":5,"Tile":1108,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF244","HCSMMF185","HCSMMF211","HCSMMF284"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.546 -08 000000140 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1111 Request: {"Cycle":52,"Lane":5,"Tile":1111,"Channels":["T","C","G","A"],"MemoryMappedFileNames":["HCSMMF184","HCSMMF200","HCSMMF274","HCSMMF257"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.547 -08 000000131 INF: FPGA: Recv TDIBB
17-03-01 08:06:13.547 -08 000000148 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1117 Request: {"Cycle":52,"Lane":5,"Tile":1117,"Channels":["T","C","G","A"],"MemoryMappedFileNames":["HCSMMF192","HCSMMF258","HCSMMF252","HCSMMF239"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.547 -08 000000031 INF: ===================Initializing FPGA for ITF Focus===================
17-03-01 08:06:13.548 -08 000000020 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1125 Request: {"Cycle":52,"Lane":5,"Tile":1125,"Channels":["C","T","A","G"],"MemoryMappedFileNames":["HCSMMF234","HCSMMF207","HCSMMF260","HCSMMF247"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.549 -08 000000036 INF: X Motor: Recv PR VI\r\n410\r\n>
17-03-01 08:06:13.549 -08 000000036 INF: X Motor: Before MoveAbsStepped, VM = 6144 (15 mm/sec), VI = 410 (1.000977 mm/sec), 'Velocity' property = 15 mm/sec
17-03-01 08:06:13.549 -08 000000134 INF: Y Motor: Recv ok\r
17-03-01 08:06:13.549 -08 000000036 INF: X Motor: Moving to 80.7738 mm @15.000 mm/sec, started at 79.6738 mm
17-03-01 08:06:13.549 -08 000000112 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1126 Request: {"Cycle":52,"Lane":5,"Tile":1126,"Channels":["T","C","A","G"],"MemoryMappedFileNames":["HCSMMF276","HCSMMF287","HCSMMF182","HCSMMF254"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.549 -08 000000031 INF: ===================TDI Scan Setup, Serial, ITFSwathPreFocus===================
17-03-01 08:06:13.549 -08 000000036 INF: X Motor: Xmit MA 8919\n
17-03-01 08:06:13.549 -08 000000134 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:13.549 -08 000000031 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:13.550 -08 000000154 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1119 Request: {"Cycle":52,"Lane":5,"Tile":1119,"Channels":["G","A","C","T"],"MemoryMappedFileNames":["HCSMMF230","HCSMMF266","HCSMMF227","HCSMMF205"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.551 -08 000000031 INF: ===================TDI Scan Setup, Serial, SetVelocity Z Motor===================
17-03-01 08:06:13.551 -08 000000031 INF: Z Motor: Set Z velocity to 1.391 mm/s / 1792263 16.16 format
17-03-01 08:06:13.551 -08 000000031 INF: FPGA: Xmit ZSTEP 1792263\n
17-03-01 08:06:13.551 -08 000000088 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1113 Request: {"Cycle":52,"Lane":5,"Tile":1113,"Channels":["G","C","A","T"],"MemoryMappedFileNames":["HCSMMF178","HCSMMF181","HCSMMF193","HCSMMF228"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.552 -08 000000150 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1104 Request: {"Cycle":52,"Lane":5,"Tile":1104,"Channels":["G","T","A","C"],"MemoryMappedFileNames":["HCSMMF245","HCSMMF233","HCSMMF235","HCSMMF219"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.553 -08 000000063 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1124 Request: {"Cycle":52,"Lane":5,"Tile":1124,"Channels":["G","T","A","C"],"MemoryMappedFileNames":["HCSMMF206","HCSMMF198","HCSMMF250","HCSMMF269"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.554 -08 000000080 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1121 Request: {"Cycle":52,"Lane":5,"Tile":1121,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF253","HCSMMF237","HCSMMF243","HCSMMF248"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.555 -08 000000044 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1123 Request: {"Cycle":52,"Lane":5,"Tile":1123,"Channels":["G","A","T","C"],"MemoryMappedFileNames":["HCSMMF259","HCSMMF222","HCSMMF218","HCSMMF223"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.556 -08 000000153 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1120 Request: {"Cycle":52,"Lane":5,"Tile":1120,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF197","HCSMMF238","HCSMMF285","HCSMMF275"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.557 -08 000000108 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1127 Request: {"Cycle":52,"Lane":5,"Tile":1127,"Channels":["C","A","T","G"],"MemoryMappedFileNames":["HCSMMF224","HCSMMF177","HCSMMF281","HCSMMF195"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.558 -08 000000119 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1128 Request: {"Cycle":52,"Lane":5,"Tile":1128,"Channels":["A","G","C","T"],"MemoryMappedFileNames":["HCSMMF212","HCSMMF203","HCSMMF246","HCSMMF208"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.561 -08 000000124 INF: Notifying RTA to Process Multi MMF for Lane: 5 Cycle: 52 Tile: 1122 Request: {"Cycle":52,"Lane":5,"Tile":1122,"Channels":["A","T","C","G"],"MemoryMappedFileNames":["HCSMMF232","HCSMMF210","HCSMMF249","HCSMMF216"],"Size":30770576,"Width":3188,"Height":4826} 
17-03-01 08:06:13.563 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:13.569 -08 000000049 INF: ===================Saving Thumbnail Image Channel A===================
17-03-01 08:06:13.595 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:13.609 -08 000000009 INF: FPGA: Recv ZSTEP 
17-03-01 08:06:13.609 -08 000000031 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:13.611 -08 000000036 INF: X Motor: Recv MA 8919\r\n>
17-03-01 08:06:13.611 -08 000000134 INF: Y Motor: Recv v 0\r
17-03-01 08:06:13.611 -08 000000134 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:13.611 -08 000000036 INF: X Motor: WaitUntilStopped 60073
17-03-01 08:06:13.611 -08 000000134 INF: Y Motor: Set target position to 5956861 encoder counts
17-03-01 08:06:13.611 -08 000000134 INF: Y Motor: Xmit s r0xca 5956861\r
17-03-01 08:06:13.611 -08 000000031 INF: ===================TDI Scan Setup, Serial, Delay Next Z Move Until Y===================
17-03-01 08:06:13.611 -08 000000031 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:13.613 -08 000000031 INF: ===================TDI Scan Setup, Serial, Arm Z Motor===================
17-03-01 08:06:13.613 -08 000000031 INF: Z Motor: Entering ArmAbsStepped
17-03-01 08:06:13.613 -08 000000031 INF: Z Motor: Arming to move to -0.1156 mm
17-03-01 08:06:13.613 -08 000000031 INF: FPGA: Xmit ZYT 6436861 4\n
17-03-01 08:06:13.669 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:13.669 -08 000000049 INF: ===================Saving Zprofile for Image Channel A===================
17-03-01 08:06:13.675 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:13.675 -08 000000054 INF: FPGA: Recv ZYT 
17-03-01 08:06:13.675 -08 000000031 INF: Z Motor: ZARM will arm Z motor and start the ramp when Y (currently 1492131 enc / 14.921 mm / ) = 6436861 enc / 64.369 mm
17-03-01 08:06:13.675 -08 000000031 INF: FPGA: Xmit ZARM 30310\n
17-03-01 08:06:13.676 -08 000000134 INF: Y Motor: Recv ok\r
17-03-01 08:06:13.676 -08 000000134 INF: Y Motor: Start the move command
17-03-01 08:06:13.676 -08 000000134 INF: Y Motor: Xmit t 1\r
17-03-01 08:06:13.707 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:13.713 -08 000000049 INF: ===================Saving Thumbnail Image Channel T===================
17-03-01 08:06:13.734 -08 000000151 INF: FPGA: Recv ZARM
17-03-01 08:06:13.734 -08 000000031 INF: Z Motor: ArmAndSetTriggerMode 'ZARM' command took 59.0622 ms
17-03-01 08:06:13.734 -08 000000031 INF: Z Motor: ArmAbsStepped took 120.7206 ms
17-03-01 08:06:13.734 -08 000000031 INF: ===================TDI Scan Setup, Serial===================
17-03-01 08:06:13.736 -08 000000134 INF: Y Motor: Recv ok\r
17-03-01 08:06:13.736 -08 000000031 INF: ===================TDI Scan Setup===================
17-03-01 08:06:13.736 -08 000000134 INF: Y Motor: WaitUntilStopped 61986
17-03-01 08:06:13.736 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:13.737 -08 000000031 INF: ===================TDI Scan Setup, FPGA Set Image Mode===================
17-03-01 08:06:13.738 -08 000000031 INF: ===================TDI Scan Setup===================
17-03-01 08:06:13.739 -08 000000031 INF: ===================TDI Scan Setup, Set FPGA Camera Trigger===================
17-03-01 08:06:13.739 -08 000000031 INF: ===================TDI Scan Setup===================
17-03-01 08:06:13.741 -08 000000031 INF: ======================================
17-03-01 08:06:13.815 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:13.821 -08 000000049 INF: ===================Saving Thumbnail Image Channel C===================
17-03-01 08:06:13.863 -08 000000134 INF: Y Motor: Unshifted Position: 1076191
17-03-01 08:06:13.913 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:13.916 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:13.922 -08 000000049 INF: ===================Saving Thumbnail Image Channel G===================
17-03-01 08:06:13.925 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:13.986 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:06:13.986 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:13.986 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:13.987 -08 000000018 INF: WaitCommand(5000) start
17-03-01 08:06:13.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Delay 5 of 5 seconds left===================
17-03-01 08:06:14.000 -08 000000082 INF: Camera #0 AttachBuffer (imageDataPtr = 60599242800 imgPtr = 60599242800 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:06:14.000 -08 000000082 INF: CameraArmTDI CameraBaseSensorPath: 0 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:06:14.000 -08 000000082 INF: CameraArmTDI CameraBaseSensorPath: 0... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:06:14.015 -08 000000082 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:06:14.017 -08 000000082 INF: ===================Camera Arm TDI, Serial, Camera TDI===================
17-03-01 08:06:14.037 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.039 -08 000000049 INF: ===================Image Analysis Flow Cell B 01, MMFProcessing===================
17-03-01 08:06:14.173 -08 000000134 INF: Y Motor: Unshifted Position: 1777121
17-03-01 08:06:14.223 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.235 -08 000000036 INF: X Motor: Xmit PR ER\n
17-03-01 08:06:14.301 -08 000000036 INF: X Motor: Recv PR ER\r\n0\r\n>
17-03-01 08:06:14.301 -08 000000036 INF: X Motor: Moved to 80.7749 after 690 ms
17-03-01 08:06:14.301 -08 000000036 INF: ======================================
17-03-01 08:06:14.323 -08 000000049 INF: ===================Image Analysis Flow Cell B 01===================
17-03-01 08:06:14.352 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.486 -08 000000134 INF: Y Motor: Unshifted Position: 2559648
17-03-01 08:06:14.536 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.611 -08 000000082 INF: Camera #2 AttachBuffer (imageDataPtr = 62411182128 imgPtr = 63317151792 , attachBufferNumFrames = 544 , frameSize = 1638400,
17-03-01 08:06:14.611 -08 000000082 INF: CameraArmTDI CameraBaseSensorPath: 2 (cameraMode TDI_1x1, ImageLines 139264
17-03-01 08:06:14.611 -08 000000082 INF: CameraArmTDI CameraBaseSensorPath: 2... SensorModeLineBundleHeight = 512, SubArrayMode = Off, HorPos = 0, VertPos = 0, HorSize = 6400, VertSize = 64)
17-03-01 08:06:14.626 -08 000000082 INF: ===================Camera Arm TDI, Serial===================
17-03-01 08:06:14.628 -08 000000082 INF: ===================Camera Arm TDI===================
17-03-01 08:06:14.629 -08 000000082 INF: ======================================
17-03-01 08:06:14.630 -08 000000109 INF: ===================MoveZMotorToStartPositionAndArmCameraAndFPGA===================
17-03-01 08:06:14.632 -08 000000109 INF: ======================================
17-03-01 08:06:14.660 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.797 -08 000000134 INF: Y Motor: Unshifted Position: 3345429
17-03-01 08:06:14.847 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.974 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:14.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:14.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Delay 4 of 5 seconds left===================
17-03-01 08:06:15.110 -08 000000134 INF: Y Motor: Unshifted Position: 4120500
17-03-01 08:06:15.160 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:15.286 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:15.421 -08 000000134 INF: Y Motor: Unshifted Position: 4908772
17-03-01 08:06:15.471 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:15.598 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:15.734 -08 000000134 INF: Y Motor: Unshifted Position: 5680003
17-03-01 08:06:15.784 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:15.908 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:15.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:15.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Delay 3 of 5 seconds left===================
17-03-01 08:06:16.048 -08 000000134 INF: Y Motor: Unshifted Position: 5956862
17-03-01 08:06:16.098 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:16.234 -08 000000134 INF: Y Motor: Unshifted Position: 5956862
17-03-01 08:06:16.234 -08 000000134 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:06:16.234 -08 000000134 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:16.296 -08 000000134 INF: Y Motor: Recv v 0\r
17-03-01 08:06:16.296 -08 000000134 INF: Y Motor: Moved to 64.5686 after 2560 ms
17-03-01 08:06:16.296 -08 000000134 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:06:16.358 -08 000000134 INF: Y Motor: Recv v 4096\r
17-03-01 08:06:16.358 -08 000000134 INF: Y Motor: Status After move finished OK:
17-03-01 08:06:16.358 -08 000000134 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:16.420 -08 000000134 INF: Y Motor: Recv v 0\r
17-03-01 08:06:16.420 -08 000000134 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:16.420 -08 000000134 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:06:16.482 -08 000000134 INF: Y Motor: Recv v 402653184\r
17-03-01 08:06:16.482 -08 000000134 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x18000000), Bit27=Trajectory running or not settled., Bit28=Velocity window exceeded.
17-03-01 08:06:16.482 -08 000000134 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:06:16.482 -08 000000134 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:06:16.544 -08 000000134 INF: Y Motor: Recv v 0\r
17-03-01 08:06:16.544 -08 000000134 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:06:16.544 -08 000000134 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:06:16.544 -08 000000134 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:16.610 -08 000000134 INF: Y Motor: Recv ok\r
17-03-01 08:06:16.610 -08 000000134 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:06:16.610 -08 000000134 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:16.671 -08 000000134 INF: Y Motor: Recv ok\r
17-03-01 08:06:16.671 -08 000000134 INF: ======================================
17-03-01 08:06:16.672 -08 000000071 INF: ===================Move X,Y===================
17-03-01 08:06:16.673 -08 000000071 INF: ======================================
17-03-01 08:06:16.674 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Moving motors===================
17-03-01 08:06:16.675 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:16.675 -08 000000042 INF: Y Motor: Set max velocity (6500000), unit is 0.1 counts/sec
17-03-01 08:06:16.675 -08 000000042 INF: Y Motor: Xmit s r0xcb 6500000\r
17-03-01 08:06:16.731 -08 000000042 INF: Y Motor: Recv ok\r
17-03-01 08:06:16.731 -08 000000042 INF: FPGA: Xmit ZFREQCL 2123\n
17-03-01 08:06:16.794 -08 000000154 INF: FPGA: Recv ZFREQCL
17-03-01 08:06:16.794 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Reporting Motor Positions===================
17-03-01 08:06:16.795 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:16.795 -08 000000042 INF: FPGA: Xmit TDIYERD\n
17-03-01 08:06:16.857 -08 000000153 INF: FPGA: Recv TDIYERD 6456863
17-03-01 08:06:16.857 -08 000000042 INF: Before scan, Y encoder from FPGA = 6456863 counts (64.569 mm)
17-03-01 08:06:16.857 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:06:16.858 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:06:16.859 -08 000000071 INF: ===================TDI FPGA Arm===================
17-03-01 08:06:16.859 -08 000000023 INF: ===================Set YMotor gains for scans===================
17-03-01 08:06:16.859 -08 000000023 INF: ======================================
17-03-01 08:06:16.859 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:06:16.860 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA, Set Y starting position for the TDIYARM2 command===================
17-03-01 08:06:16.860 -08 000000071 INF: FPGA: Xmit TDIYPOS 6345936\n
17-03-01 08:06:16.917 -08 000000092 INF: FPGA: Recv TDIYPOS
17-03-01 08:06:16.917 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:06:16.919 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA, FPGA Arm TDI===================
17-03-01 08:06:16.919 -08 000000071 INF: FPGA: Xmit TDIYARM3 139264 6436861 1 1\n
17-03-01 08:06:16.980 -08 000000044 INF: FPGA: Recv TDIYARM3
17-03-01 08:06:16.980 -08 000000071 INF: ===================TDI FPGA Arm, Arm FPGA===================
17-03-01 08:06:16.982 -08 000000071 INF: ===================TDI FPGA Arm===================
17-03-01 08:06:16.983 -08 000000071 INF: ======================================
17-03-01 08:06:16.985 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Arm Scan and Set YMotor Gain===================
17-03-01 08:06:16.986 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C===================
17-03-01 08:06:16.986 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:16.986 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:16.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:16.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Delay 2 of 5 seconds left===================
17-03-01 08:06:16.987 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:16.988 -08 000000009 INF: ===================Move Excitation Filter 1 (G) to 'OD0.2'===================
17-03-01 08:06:16.988 -08 000000122 INF: ===================Move Excitation Filter 2 (A) to 'OD0.2'===================
17-03-01 08:06:16.988 -08 000000009 INF: Excitation Filter 1: Moving 'G' to index 5 (OD0.2)
17-03-01 08:06:16.988 -08 000000009 INF: Excitation Filter 1: Moving to 225.0000 degrees
17-03-01 08:06:16.988 -08 000000009 INF: Excitation Filter 1: Moving -107 steps
17-03-01 08:06:16.988 -08 000000122 INF: Excitation Filter 2: Moving 'A' to index 5 (OD0.2)
17-03-01 08:06:16.988 -08 000000009 INF: FPGA: Xmit EX1MV -107\n
17-03-01 08:06:16.988 -08 000000122 INF: Excitation Filter 2: Moving to 225.0000 degrees
17-03-01 08:06:16.988 -08 000000122 INF: Excitation Filter 2: Moving -107 steps
17-03-01 08:06:16.989 -08 000000122 INF: FPGA: Xmit EX2MV -107\n
17-03-01 08:06:17.354 -08 000000082 INF: FPGA: Recv EX1MV
17-03-01 08:06:17.354 -08 000000082 INF: FPGA: Recv EX2MV
17-03-01 08:06:17.354 -08 000000122 INF: Excitation Filter 2: Moved -107 steps in 365.832 ms
17-03-01 08:06:17.354 -08 000000009 INF: Excitation Filter 1: Moved -107 steps in 366.0319 ms
17-03-01 08:06:17.354 -08 000000122 INF: Excitation Filter 2: Moved to 224.7190 degrees (target was 225.0000) in 365.9928 ms
17-03-01 08:06:17.354 -08 000000122 INF: Excitation Filter 2: Moved 'A' to index 5 (OD0.2) in 366.1011 ms
17-03-01 08:06:17.354 -08 000000009 INF: Excitation Filter 1: Moved to 224.7190 degrees (target was 225.0000) in 366.1388 ms
17-03-01 08:06:17.354 -08 000000009 INF: Excitation Filter 1: Moved 'G' to index 5 (OD0.2) in 366.3087 ms
17-03-01 08:06:17.355 -08 000000122 INF: ======================================
17-03-01 08:06:17.355 -08 000000009 INF: ======================================
17-03-01 08:06:17.356 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:17.357 -08 000000042 INF: ===================Flow Cell B (HHGTLBBXX), Cycle #52, Imaging, Top Surface, Lane 5, Swath 2 - X = 80.79964 Y = 39.76308, Channels A, G, T, C, Scanning===================
17-03-01 08:06:17.358 -08 000000111 INF: ===================Camera TDI===================
17-03-01 08:06:17.358 -08 000000139 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:06:17.358 -08 000000023 INF: ===================FPGA Z Wait===================
17-03-01 08:06:17.358 -08 000000105 INF: ===================Move Y Motor without settling===================
17-03-01 08:06:17.358 -08 000000023 INF: FPGA: Xmit ZWAIT\n
17-03-01 08:06:17.358 -08 000000105 INF: Y Motor: Moving to 14.9203 mm @6.500 mm/sec, started at 64.5686 mm
17-03-01 08:06:17.358 -08 000000105 INF: Y Motor: Before move, after clearing latch: Clear latched fault status
17-03-01 08:06:17.358 -08 000000105 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:17.358 -08 000000111 INF: ===================Camera TDI, Parallel===================
17-03-01 08:06:17.358 -08 000000139 INF: ===================Wait for frames then close excitation filters, FPGA Wait TDI===================
17-03-01 08:06:17.359 -08 000000139 INF: FPGA: Xmit TDIYWAIT\n
17-03-01 08:06:17.359 -08 000000044 INF: ===================Camera TDI===================
17-03-01 08:06:17.360 -08 000000117 INF: ===================Camera TDI===================
17-03-01 08:06:17.361 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:17.361 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:17.361 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:17.361 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:17.418 -08 000000105 INF: Y Motor: Recv ok\r
17-03-01 08:06:17.418 -08 000000105 INF: Y Motor: Clear latched amplifier status: Before move, after clearing latch
17-03-01 08:06:17.418 -08 000000105 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:17.480 -08 000000105 INF: Y Motor: Recv ok\r
17-03-01 08:06:17.480 -08 000000105 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:17.512 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:17.512 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:17.513 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:17.513 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:17.520 -08 000000154 INF: RunCopyService queue size at 3/1/2017 8:06:17 AM is 0
17-03-01 08:06:17.542 -08 000000105 INF: Y Motor: Recv v 0\r
17-03-01 08:06:17.542 -08 000000105 INF: Y Motor: Before move, after clearing latch: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:17.542 -08 000000105 INF: Y Motor: Set target position to 992028 encoder counts
17-03-01 08:06:17.542 -08 000000105 INF: Y Motor: Xmit s r0xca 992028\r
17-03-01 08:06:17.709 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:17.709 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = -1, frameCount = 0.
17-03-01 08:06:17.709 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:17.709 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 0
17-03-01 08:06:17.713 -08 000000105 INF: Y Motor: Recv ok\r
17-03-01 08:06:17.713 -08 000000105 INF: Y Motor: Start the move command
17-03-01 08:06:17.713 -08 000000105 INF: Y Motor: Xmit t 1\r
17-03-01 08:06:17.763 -08 000000105 INF: Y Motor: Recv ok\r
17-03-01 08:06:17.763 -08 000000105 INF: Y Motor: WaitUntilStopped 67638
17-03-01 08:06:17.763 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:17.838 -08 000000136 INF: FPGA: Recv ZWAIT 
17-03-01 08:06:17.839 -08 000000023 INF: ======================================
17-03-01 08:06:17.859 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 1, frameCount = 2.
17-03-01 08:06:17.859 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 2
17-03-01 08:06:17.859 -08 000000117 INF: ===================Camera #2 Frame #2===================
17-03-01 08:06:17.860 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 1, frameCount = 2.
17-03-01 08:06:17.860 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 2
17-03-01 08:06:17.860 -08 000000044 INF: ===================Camera #0 Frame #2===================
17-03-01 08:06:17.888 -08 000000105 INF: Y Motor: Unshifted Position: 5902810
17-03-01 08:06:17.938 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:17.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:17.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Delay 1 of 5 seconds left===================
17-03-01 08:06:18.019 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 7, frameCount = 8.
17-03-01 08:06:18.019 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 8
17-03-01 08:06:18.019 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 7, frameCount = 8.
17-03-01 08:06:18.019 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 8
17-03-01 08:06:18.019 -08 000000044 INF: ===================Camera #0 Frame #8===================
17-03-01 08:06:18.019 -08 000000117 INF: ===================Camera #2 Frame #8===================
17-03-01 08:06:18.061 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:18.187 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 13, frameCount = 14.
17-03-01 08:06:18.187 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 14
17-03-01 08:06:18.187 -08 000000044 INF: ===================Camera #0 Frame #14===================
17-03-01 08:06:18.192 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 14, frameCount = 15.
17-03-01 08:06:18.192 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 15
17-03-01 08:06:18.192 -08 000000117 INF: ===================Camera #2 Frame #15===================
17-03-01 08:06:18.199 -08 000000105 INF: Y Motor: Unshifted Position: 5700003
17-03-01 08:06:18.249 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:18.356 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 20, frameCount = 21.
17-03-01 08:06:18.356 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 21
17-03-01 08:06:18.356 -08 000000044 INF: ===================Camera #0 Frame #21===================
17-03-01 08:06:18.372 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 20, frameCount = 21.
17-03-01 08:06:18.372 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 21
17-03-01 08:06:18.372 -08 000000117 INF: ===================Camera #2 Frame #21===================
17-03-01 08:06:18.375 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:18.510 -08 000000105 INF: Y Motor: Unshifted Position: 5497650
17-03-01 08:06:18.537 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 26, frameCount = 27.
17-03-01 08:06:18.537 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 27
17-03-01 08:06:18.537 -08 000000044 INF: ===================Camera #0 Frame #27===================
17-03-01 08:06:18.550 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 27, frameCount = 28.
17-03-01 08:06:18.550 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 28
17-03-01 08:06:18.550 -08 000000117 INF: ===================Camera #2 Frame #28===================
17-03-01 08:06:18.560 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:18.686 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:18.707 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 33, frameCount = 34.
17-03-01 08:06:18.707 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 34
17-03-01 08:06:18.707 -08 000000044 INF: ===================Camera #0 Frame #34===================
17-03-01 08:06:18.733 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 34, frameCount = 35.
17-03-01 08:06:18.733 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 35
17-03-01 08:06:18.733 -08 000000117 INF: ===================Camera #2 Frame #35===================
17-03-01 08:06:18.824 -08 000000105 INF: Y Motor: Unshifted Position: 5295493
17-03-01 08:06:18.874 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:18.887 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 39, frameCount = 40.
17-03-01 08:06:18.887 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 40
17-03-01 08:06:18.887 -08 000000044 INF: ===================Camera #0 Frame #40===================
17-03-01 08:06:18.906 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 40, frameCount = 41.
17-03-01 08:06:18.906 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 41
17-03-01 08:06:18.906 -08 000000117 INF: ===================Camera #2 Frame #41===================
17-03-01 08:06:18.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:18.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:18.987 -08 000000018 INF: WaitCommand(5000) end
17-03-01 08:06:18.987 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:18.999 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.055 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 45, frameCount = 46.
17-03-01 08:06:19.055 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 46
17-03-01 08:06:19.055 -08 000000044 INF: ===================Camera #0 Frame #46===================
17-03-01 08:06:19.076 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 46, frameCount = 47.
17-03-01 08:06:19.076 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 47
17-03-01 08:06:19.076 -08 000000117 INF: ===================Camera #2 Frame #47===================
17-03-01 08:06:19.086 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:06:19.134 -08 000000105 INF: Y Motor: Unshifted Position: 5091827
17-03-01 08:06:19.148 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`9600 (0x03)\r\n(0xFF)
17-03-01 08:06:19.148 -08 000000018 INF: Current Position of Pump is: 9600
17-03-01 08:06:19.184 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.223 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 52, frameCount = 53.
17-03-01 08:06:19.223 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 53
17-03-01 08:06:19.223 -08 000000044 INF: ===================Camera #0 Frame #53===================
17-03-01 08:06:19.248 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1?\r
17-03-01 08:06:19.254 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 53, frameCount = 54.
17-03-01 08:06:19.254 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 54
17-03-01 08:06:19.254 -08 000000117 INF: ===================Camera #2 Frame #54===================
17-03-01 08:06:19.310 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.336 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`9600 (0x03)\r\n(0xFF)
17-03-01 08:06:19.336 -08 000000018 INF: Current Position of Pump is: 9600
17-03-01 08:06:19.336 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1), Dispensing port PortC===================
17-03-01 08:06:19.395 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 58, frameCount = 59.
17-03-01 08:06:19.395 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 59
17-03-01 08:06:19.395 -08 000000044 INF: ===================Camera #0 Frame #59===================
17-03-01 08:06:19.427 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 59, frameCount = 60.
17-03-01 08:06:19.427 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 60
17-03-01 08:06:19.427 -08 000000117 INF: ===================Camera #2 Frame #60===================
17-03-01 08:06:19.436 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1V8000OD9600R\r
17-03-01 08:06:19.448 -08 000000105 INF: Y Motor: Unshifted Position: 4889024
17-03-01 08:06:19.498 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.523 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:19.563 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 64, frameCount = 65.
17-03-01 08:06:19.563 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 65
17-03-01 08:06:19.563 -08 000000044 INF: ===================Camera #0 Frame #65===================
17-03-01 08:06:19.596 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 65, frameCount = 66.
17-03-01 08:06:19.596 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 66
17-03-01 08:06:19.596 -08 000000117 INF: ===================Camera #2 Frame #66===================
17-03-01 08:06:19.621 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.623 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:19.650 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:19.732 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 70, frameCount = 71.
17-03-01 08:06:19.732 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 71
17-03-01 08:06:19.732 -08 000000044 INF: ===================Camera #0 Frame #71===================
17-03-01 08:06:19.759 -08 000000105 INF: Y Motor: Unshifted Position: 4685360
17-03-01 08:06:19.766 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 72, frameCount = 73.
17-03-01 08:06:19.766 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 73
17-03-01 08:06:19.766 -08 000000117 INF: ===================Camera #2 Frame #73===================
17-03-01 08:06:19.809 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.900 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:19.900 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 76, frameCount = 77.
17-03-01 08:06:19.900 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 78
17-03-01 08:06:19.900 -08 000000044 INF: ===================Camera #0 Frame #78===================
17-03-01 08:06:19.937 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:19.938 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 78, frameCount = 79.
17-03-01 08:06:19.938 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 79
17-03-01 08:06:19.938 -08 000000117 INF: ===================Camera #2 Frame #79===================
17-03-01 08:06:19.960 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:20.071 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 83, frameCount = 84.
17-03-01 08:06:20.071 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 84
17-03-01 08:06:20.071 -08 000000044 INF: ===================Camera #0 Frame #84===================
17-03-01 08:06:20.072 -08 000000105 INF: Y Motor: Unshifted Position: 4482335
17-03-01 08:06:20.107 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 84, frameCount = 85.
17-03-01 08:06:20.107 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 85
17-03-01 08:06:20.107 -08 000000117 INF: ===================Camera #2 Frame #85===================
17-03-01 08:06:20.122 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:20.210 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:20.241 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 89, frameCount = 90.
17-03-01 08:06:20.241 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 90
17-03-01 08:06:20.241 -08 000000044 INF: ===================Camera #0 Frame #90===================
17-03-01 08:06:20.246 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:20.274 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:20.276 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 90, frameCount = 91.
17-03-01 08:06:20.276 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 91
17-03-01 08:06:20.276 -08 000000117 INF: ===================Camera #2 Frame #91===================
17-03-01 08:06:20.383 -08 000000105 INF: Y Motor: Unshifted Position: 4279535
17-03-01 08:06:20.409 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 95, frameCount = 96.
17-03-01 08:06:20.409 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 96
17-03-01 08:06:20.409 -08 000000044 INF: ===================Camera #0 Frame #96===================
17-03-01 08:06:20.433 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:20.445 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 97, frameCount = 98.
17-03-01 08:06:20.445 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 98
17-03-01 08:06:20.445 -08 000000117 INF: ===================Camera #2 Frame #98===================
17-03-01 08:06:20.524 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:20.559 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:20.577 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 101, frameCount = 102.
17-03-01 08:06:20.577 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 102
17-03-01 08:06:20.577 -08 000000044 INF: ===================Camera #0 Frame #102===================
17-03-01 08:06:20.585 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:20.617 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 103, frameCount = 104.
17-03-01 08:06:20.617 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 104
17-03-01 08:06:20.617 -08 000000117 INF: ===================Camera #2 Frame #104===================
17-03-01 08:06:20.694 -08 000000105 INF: Y Motor: Unshifted Position: 4077159
17-03-01 08:06:20.744 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:20.745 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 108, frameCount = 109.
17-03-01 08:06:20.745 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 109
17-03-01 08:06:20.745 -08 000000044 INF: ===================Camera #0 Frame #109===================
17-03-01 08:06:20.786 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 109, frameCount = 110.
17-03-01 08:06:20.786 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 110
17-03-01 08:06:20.786 -08 000000117 INF: ===================Camera #2 Frame #110===================
17-03-01 08:06:20.835 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:20.870 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:20.896 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:20.916 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 114, frameCount = 115.
17-03-01 08:06:20.916 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 115
17-03-01 08:06:20.916 -08 000000044 INF: ===================Camera #0 Frame #115===================
17-03-01 08:06:20.955 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 115, frameCount = 116.
17-03-01 08:06:20.955 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 116
17-03-01 08:06:20.955 -08 000000117 INF: ===================Camera #2 Frame #116===================
17-03-01 08:06:21.008 -08 000000105 INF: Y Motor: Unshifted Position: 3875016
17-03-01 08:06:21.058 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:21.084 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 120, frameCount = 121.
17-03-01 08:06:21.084 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 121
17-03-01 08:06:21.084 -08 000000044 INF: ===================Camera #0 Frame #121===================
17-03-01 08:06:21.124 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 122, frameCount = 123.
17-03-01 08:06:21.124 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 123
17-03-01 08:06:21.124 -08 000000117 INF: ===================Camera #2 Frame #123===================
17-03-01 08:06:21.146 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:21.181 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:21.210 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:06:21.210 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Pumping Reagent HIM (1)===================
17-03-01 08:06:21.210 -08 000000018 INF: KloehnPump A (KLOEHNA): Waiting 1000 ms before setting solenoid valve back to 'aspirate' position after PumpSolution
17-03-01 08:06:21.252 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 126, frameCount = 127.
17-03-01 08:06:21.252 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 127
17-03-01 08:06:21.252 -08 000000044 INF: ===================Camera #0 Frame #127===================
17-03-01 08:06:21.296 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 128, frameCount = 129.
17-03-01 08:06:21.296 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 129
17-03-01 08:06:21.296 -08 000000117 INF: ===================Camera #2 Frame #129===================
17-03-01 08:06:21.319 -08 000000105 INF: Y Motor: Unshifted Position: 3670696
17-03-01 08:06:21.369 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:21.420 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 132, frameCount = 133.
17-03-01 08:06:21.420 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 133
17-03-01 08:06:21.420 -08 000000044 INF: ===================Camera #0 Frame #133===================
17-03-01 08:06:21.465 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 134, frameCount = 135.
17-03-01 08:06:21.465 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 135
17-03-01 08:06:21.465 -08 000000117 INF: ===================Camera #2 Frame #135===================
17-03-01 08:06:21.492 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:21.588 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 139, frameCount = 140.
17-03-01 08:06:21.588 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 140
17-03-01 08:06:21.588 -08 000000044 INF: ===================Camera #0 Frame #140===================
17-03-01 08:06:21.630 -08 000000105 INF: Y Motor: Unshifted Position: 3468549
17-03-01 08:06:21.634 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 140, frameCount = 141.
17-03-01 08:06:21.634 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 141
17-03-01 08:06:21.634 -08 000000117 INF: ===================Camera #2 Frame #141===================
17-03-01 08:06:21.680 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:21.760 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 145, frameCount = 146.
17-03-01 08:06:21.760 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 146
17-03-01 08:06:21.760 -08 000000044 INF: ===================Camera #0 Frame #146===================
17-03-01 08:06:21.803 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 147, frameCount = 148.
17-03-01 08:06:21.803 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 148
17-03-01 08:06:21.803 -08 000000117 INF: ===================Camera #2 Frame #148===================
17-03-01 08:06:21.806 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:21.928 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 151, frameCount = 152.
17-03-01 08:06:21.928 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 152
17-03-01 08:06:21.928 -08 000000044 INF: ===================Camera #0 Frame #152===================
17-03-01 08:06:21.942 -08 000000105 INF: Y Motor: Unshifted Position: 3266181
17-03-01 08:06:21.975 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 153, frameCount = 154.
17-03-01 08:06:21.975 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 154
17-03-01 08:06:21.975 -08 000000117 INF: ===================Camera #2 Frame #154===================
17-03-01 08:06:21.992 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.098 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 157, frameCount = 158.
17-03-01 08:06:22.098 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 158
17-03-01 08:06:22.098 -08 000000044 INF: ===================Camera #0 Frame #158===================
17-03-01 08:06:22.119 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.145 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 159, frameCount = 160.
17-03-01 08:06:22.145 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 160
17-03-01 08:06:22.145 -08 000000117 INF: ===================Camera #2 Frame #160===================
17-03-01 08:06:22.253 -08 000000105 INF: Y Motor: Unshifted Position: 3063397
17-03-01 08:06:22.269 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 164, frameCount = 165.
17-03-01 08:06:22.269 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 165
17-03-01 08:06:22.269 -08 000000044 INF: ===================Camera #0 Frame #165===================
17-03-01 08:06:22.303 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.310 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1IR\r
17-03-01 08:06:22.316 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 165, frameCount = 166.
17-03-01 08:06:22.316 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 166
17-03-01 08:06:22.316 -08 000000117 INF: ===================Camera #2 Frame #166===================
17-03-01 08:06:22.393 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:22.429 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.443 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 170, frameCount = 171.
17-03-01 08:06:22.443 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 171
17-03-01 08:06:22.443 -08 000000044 INF: ===================Camera #0 Frame #171===================
17-03-01 08:06:22.487 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 172, frameCount = 173.
17-03-01 08:06:22.487 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 173
17-03-01 08:06:22.487 -08 000000117 INF: ===================Camera #2 Frame #173===================
17-03-01 08:06:22.493 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:22.519 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0@(0x03)\r\n(0xFF)
17-03-01 08:06:22.567 -08 000000105 INF: Y Motor: Unshifted Position: 2859076
17-03-01 08:06:22.613 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 176, frameCount = 177.
17-03-01 08:06:22.613 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 177
17-03-01 08:06:22.613 -08 000000044 INF: ===================Camera #0 Frame #177===================
17-03-01 08:06:22.617 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.661 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 178, frameCount = 179.
17-03-01 08:06:22.661 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 179
17-03-01 08:06:22.661 -08 000000117 INF: ===================Camera #2 Frame #179===================
17-03-01 08:06:22.740 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.769 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Xmit /1\r
17-03-01 08:06:22.784 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 183, frameCount = 184.
17-03-01 08:06:22.784 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 184
17-03-01 08:06:22.784 -08 000000044 INF: ===================Camera #0 Frame #184===================
17-03-01 08:06:22.830 -08 000000018 INF: KloehnSerialPort A (KLOEHNA): Recv /0`(0x03)\r\n(0xFF)
17-03-01 08:06:22.830 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:06:22.830 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Closing shutoff valve===================
17-03-01 08:06:22.832 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 184, frameCount = 185.
17-03-01 08:06:22.832 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 185
17-03-01 08:06:22.832 -08 000000117 INF: ===================Camera #2 Frame #185===================
17-03-01 08:06:22.878 -08 000000105 INF: Y Motor: Unshifted Position: 2656925
17-03-01 08:06:22.928 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:22.958 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 189, frameCount = 190.
17-03-01 08:06:22.958 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 190
17-03-01 08:06:22.958 -08 000000044 INF: ===================Camera #0 Frame #190===================
17-03-01 08:06:23.003 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 191, frameCount = 192.
17-03-01 08:06:23.003 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 192
17-03-01 08:06:23.003 -08 000000117 INF: ===================Camera #2 Frame #192===================
17-03-01 08:06:23.052 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:23.128 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 195, frameCount = 196.
17-03-01 08:06:23.128 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 196
17-03-01 08:06:23.128 -08 000000044 INF: ===================Camera #0 Frame #196===================
17-03-01 08:06:23.178 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 197, frameCount = 198.
17-03-01 08:06:23.178 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 198
17-03-01 08:06:23.178 -08 000000117 INF: ===================Camera #2 Frame #198===================
17-03-01 08:06:23.187 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:06:23.187 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:06:23.188 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:06:23.188 -08 000000018 INF: WaitCommand(40000) start
17-03-01 08:06:23.188 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Delay 40 of 40 seconds left===================
17-03-01 08:06:23.190 -08 000000105 INF: Y Motor: Unshifted Position: 2453919
17-03-01 08:06:23.240 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:23.298 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 202, frameCount = 203.
17-03-01 08:06:23.298 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 203
17-03-01 08:06:23.298 -08 000000044 INF: ===================Camera #0 Frame #203===================
17-03-01 08:06:23.349 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 203, frameCount = 204.
17-03-01 08:06:23.349 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 204
17-03-01 08:06:23.349 -08 000000117 INF: ===================Camera #2 Frame #204===================
17-03-01 08:06:23.366 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:23.471 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 208, frameCount = 209.
17-03-01 08:06:23.471 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 209
17-03-01 08:06:23.471 -08 000000044 INF: ===================Camera #0 Frame #209===================
17-03-01 08:06:23.501 -08 000000105 INF: Y Motor: Unshifted Position: 2251759
17-03-01 08:06:23.520 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 210, frameCount = 211.
17-03-01 08:06:23.520 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 211
17-03-01 08:06:23.520 -08 000000117 INF: ===================Camera #2 Frame #211===================
17-03-01 08:06:23.551 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:23.641 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 214, frameCount = 215.
17-03-01 08:06:23.641 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 215
17-03-01 08:06:23.641 -08 000000044 INF: ===================Camera #0 Frame #215===================
17-03-01 08:06:23.677 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:23.694 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 216, frameCount = 217.
17-03-01 08:06:23.694 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 217
17-03-01 08:06:23.694 -08 000000117 INF: ===================Camera #2 Frame #217===================
17-03-01 08:06:23.811 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 220, frameCount = 221.
17-03-01 08:06:23.811 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 221
17-03-01 08:06:23.811 -08 000000044 INF: ===================Camera #0 Frame #221===================
17-03-01 08:06:23.815 -08 000000105 INF: Y Motor: Unshifted Position: 2047443
17-03-01 08:06:23.865 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:23.865 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 222, frameCount = 223.
17-03-01 08:06:23.865 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 223
17-03-01 08:06:23.865 -08 000000117 INF: ===================Camera #2 Frame #223===================
17-03-01 08:06:23.981 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 227, frameCount = 228.
17-03-01 08:06:23.981 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 228
17-03-01 08:06:23.981 -08 000000044 INF: ===================Camera #0 Frame #228===================
17-03-01 08:06:23.988 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:24.036 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 229, frameCount = 230.
17-03-01 08:06:24.036 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 230
17-03-01 08:06:24.036 -08 000000117 INF: ===================Camera #2 Frame #230===================
17-03-01 08:06:24.125 -08 000000105 INF: Y Motor: Unshifted Position: 1844421
17-03-01 08:06:24.154 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 233, frameCount = 234.
17-03-01 08:06:24.154 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 234
17-03-01 08:06:24.154 -08 000000044 INF: ===================Camera #0 Frame #234===================
17-03-01 08:06:24.175 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:24.188 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:06:24.188 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Delay 39 of 40 seconds left===================
17-03-01 08:06:24.211 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 235, frameCount = 236.
17-03-01 08:06:24.211 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 236
17-03-01 08:06:24.211 -08 000000117 INF: ===================Camera #2 Frame #236===================
17-03-01 08:06:24.301 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:24.324 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 239, frameCount = 240.
17-03-01 08:06:24.324 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 240
17-03-01 08:06:24.324 -08 000000044 INF: ===================Camera #0 Frame #240===================
17-03-01 08:06:24.381 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 241, frameCount = 242.
17-03-01 08:06:24.381 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 242
17-03-01 08:06:24.381 -08 000000117 INF: ===================Camera #2 Frame #242===================
17-03-01 08:06:24.439 -08 000000105 INF: Y Motor: Unshifted Position: 1641615
17-03-01 08:06:24.489 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:24.494 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 246, frameCount = 247.
17-03-01 08:06:24.494 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 247
17-03-01 08:06:24.494 -08 000000044 INF: ===================Camera #0 Frame #247===================
17-03-01 08:06:24.552 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 248, frameCount = 249.
17-03-01 08:06:24.552 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 249
17-03-01 08:06:24.552 -08 000000117 INF: ===================Camera #2 Frame #249===================
17-03-01 08:06:24.612 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:24.667 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 252, frameCount = 253.
17-03-01 08:06:24.667 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 253
17-03-01 08:06:24.667 -08 000000044 INF: ===================Camera #0 Frame #253===================
17-03-01 08:06:24.726 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 254, frameCount = 255.
17-03-01 08:06:24.726 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 255
17-03-01 08:06:24.726 -08 000000117 INF: ===================Camera #2 Frame #255===================
17-03-01 08:06:24.750 -08 000000105 INF: Y Motor: Unshifted Position: 1439459
17-03-01 08:06:24.800 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:24.837 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 258, frameCount = 259.
17-03-01 08:06:24.837 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 259
17-03-01 08:06:24.837 -08 000000044 INF: ===================Camera #0 Frame #259===================
17-03-01 08:06:24.897 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 260, frameCount = 261.
17-03-01 08:06:24.897 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 261
17-03-01 08:06:24.897 -08 000000117 INF: ===================Camera #2 Frame #261===================
17-03-01 08:06:24.926 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:25.007 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 265, frameCount = 266.
17-03-01 08:06:25.007 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 266
17-03-01 08:06:25.007 -08 000000044 INF: ===================Camera #0 Frame #266===================
17-03-01 08:06:25.061 -08 000000105 INF: Y Motor: Unshifted Position: 1237099
17-03-01 08:06:25.068 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 267, frameCount = 268.
17-03-01 08:06:25.068 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 268
17-03-01 08:06:25.068 -08 000000117 INF: ===================Camera #2 Frame #268===================
17-03-01 08:06:25.111 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:25.180 -08 000000044 INF: Camera #0 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:06:25.180 -08 000000044 INF: Camera #0 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:06:25.180 -08 000000044 INF: ===================Camera #0 Frame #272===================
17-03-01 08:06:25.188 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation===================
17-03-01 08:06:25.188 -08 000000018 INF: ===================Flow Cell A (HHHWNBBXX), Cycle #53, Chemistry CompleteCycle, Incorporation, Delay 38 of 40 seconds left===================
17-03-01 08:06:25.200 -08 000000093 INF: FPGA: Recv TDIYWAIT
17-03-01 08:06:25.200 -08 000000139 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:06:25.200 -08 000000044 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:06:25.201 -08 000000044 INF: ===================CameraTDI Cleanup===================
17-03-01 08:06:25.201 -08 000000139 INF: ===================Wait for frames then close excitation filters, Close excitation filters===================
17-03-01 08:06:25.202 -08 000000082 INF: ===================Move Excitation Filter 1 to 'BlockPosition'===================
17-03-01 08:06:25.202 -08 000000112 INF: ===================Move Excitation Filter 2 to 'BlockPosition'===================
17-03-01 08:06:25.203 -08 000000082 INF: Excitation Filter 1: Moving 'Excitation Filter 1' to index 0 (BlockPosition)
17-03-01 08:06:25.203 -08 000000082 INF: Excitation Filter 1: Moving to 0.0000 degrees
17-03-01 08:06:25.203 -08 000000082 INF: Excitation Filter 1: Moving 107 steps
17-03-01 08:06:25.203 -08 000000082 INF: FPGA: Xmit EX1MV 107\n
17-03-01 08:06:25.203 -08 000000112 INF: Excitation Filter 2: Moving 'Excitation Filter 2' to index 0 (BlockPosition)
17-03-01 08:06:25.203 -08 000000112 INF: Excitation Filter 2: Moving to 0.0000 degrees
17-03-01 08:06:25.203 -08 000000112 INF: Excitation Filter 2: Moving 107 steps
17-03-01 08:06:25.204 -08 000000112 INF: FPGA: Xmit EX2MV 107\n
17-03-01 08:06:25.237 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:25.337 -08 000000044 INF: Camera #0 ReleaseBuffer
17-03-01 08:06:25.337 -08 000000117 INF: Camera #2 called GetTransferInfo, newestFrameIndex = 271, frameCount = 272.
17-03-01 08:06:25.337 -08 000000117 INF: Camera #2 called GetCurrentFrameReceived, frameHasDataTotalFramesReceived = 272
17-03-01 08:06:25.337 -08 000000044 INF: ===================Camera TDI===================
17-03-01 08:06:25.337 -08 000000117 INF: ===================Camera #2 Frame #272===================
17-03-01 08:06:25.351 -08 000000117 INF: Camera complete - got 272 frames, processed 272 frames, expected 272 frames.
17-03-01 08:06:25.353 -08 000000117 INF: ===================CameraTDI Cleanup===================
17-03-01 08:06:25.368 -08 000000044 INF: ======================================
17-03-01 08:06:25.375 -08 000000105 INF: Y Motor: Unshifted Position: 1032990
17-03-01 08:06:25.425 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMoving
17-03-01 08:06:25.525 -08 000000117 INF: Camera #2 ReleaseBuffer
17-03-01 08:06:25.525 -08 000000117 INF: ===================Camera TDI===================
17-03-01 08:06:25.559 -08 000000117 INF: ======================================
17-03-01 08:06:25.561 -08 000000111 INF: ===================Camera TDI===================
17-03-01 08:06:25.562 -08 000000105 INF: Y Motor: Unshifted Position: 992028
17-03-01 08:06:25.562 -08 000000105 INF: Y Motor: Get amplifier status: UpdateMotorStatus
17-03-01 08:06:25.562 -08 000000105 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:25.562 -08 000000111 INF: ======================================
17-03-01 08:06:25.576 -08 000000093 INF: FPGA: Recv EX1MV
17-03-01 08:06:25.576 -08 000000093 INF: FPGA: Recv EX2MV
17-03-01 08:06:25.576 -08 000000112 INF: Excitation Filter 2: Moved 107 steps in 372.9259 ms
17-03-01 08:06:25.576 -08 000000082 INF: Excitation Filter 1: Moved 107 steps in 373.1486 ms
17-03-01 08:06:25.576 -08 000000112 INF: Excitation Filter 2: Moved to 0.0000 degrees (target was 0.0000) in 373.0448 ms
17-03-01 08:06:25.576 -08 000000112 INF: Excitation Filter 2: Moved 'Excitation Filter 2' to index 0 (BlockPosition) in 373.1851 ms
17-03-01 08:06:25.576 -08 000000082 INF: Excitation Filter 1: Moved to 0.0000 degrees (target was 0.0000) in 373.2608 ms
17-03-01 08:06:25.576 -08 000000082 INF: Excitation Filter 1: Moved 'Excitation Filter 1' to index 0 (BlockPosition) in 373.4334 ms
17-03-01 08:06:25.576 -08 000000112 INF: ======================================
17-03-01 08:06:25.576 -08 000000082 INF: ======================================
17-03-01 08:06:25.578 -08 000000139 INF: ===================Wait for frames then close excitation filters===================
17-03-01 08:06:25.579 -08 000000139 INF: ======================================
17-03-01 08:06:25.624 -08 000000105 INF: Y Motor: Recv v 0\r
17-03-01 08:06:25.624 -08 000000105 INF: Y Motor: Moved to 14.9203 after 7861 ms
17-03-01 08:06:25.624 -08 000000105 INF: Y Motor: Xmit g r0xc9\r
17-03-01 08:06:25.686 -08 000000105 INF: Y Motor: Recv v 4097\r
17-03-01 08:06:25.686 -08 000000105 INF: Y Motor: Status After move finished OK:
17-03-01 08:06:25.686 -08 000000105 INF: Y Motor: Xmit g r0xa0\r
17-03-01 08:06:25.750 -08 000000105 INF: Y Motor: Recv v 0\r
17-03-01 08:06:25.750 -08 000000105 INF: Y Motor: After move finished OK: The following amplifier status register (g r0xa0) bits are set (value = 0x00000000)
17-03-01 08:06:25.750 -08 000000105 INF: Y Motor: Xmit g r0xa1\r
17-03-01 08:06:25.813 -08 000000105 INF: Y Motor: Recv v 134217728\r
17-03-01 08:06:25.813 -08 000000105 INF: Y Motor: After move finished OK: The following latched amplifier status register (g r0xa1) bits are set (value = 0x08000000), Bit27=Trajectory running or not settled.
17-03-01 08:06:25.813 -08 000000105 INF: Y Motor: Get latched fault status: After move finished OK
17-03-01 08:06:25.813 -08 000000105 INF: Y Motor: Xmit g r0xa4\r
17-03-01 08:06:25.873 -08 000000105 INF: Y Motor: Recv v 0\r
17-03-01 08:06:25.873 -08 000000105 INF: Y Motor: After move finished OK: The following latched fault status register (0xa4) bits are set (value = 0x00000000)
17-03-01 08:06:25.873 -08 000000105 INF: Y Motor: After move finished OK: Clear latched fault status
17-03-01 08:06:25.873 -08 000000105 INF: Y Motor: Xmit s r0xa4 0xffff\r
17-03-01 08:06:25.935 -08 000000105 INF: Y Motor: Recv ok\r
17-03-01 08:06:25.935 -08 000000105 INF: Y Motor: Clear latched amplifier status: After move finished OK
17-03-01 08:06:25.935 -08 000000105 INF: Y Motor: Xmit s r0xa1 0xffffffff\r
17-03-01 08:06:25.997 -08 000000105 INF: Y Motor: Recv ok\r
17-03-